12in Kitchen Gas Cooktop 2 burners NG/LPG Stainless Steel Convertible New

Description: Old-style cooktops usually use plastic at the back side, which is easy to be damaged by aging.Both front and back sides of this gas cooktop is made of stainless steel, it is stronger, more anti-wear and safer and has a longer service life. Pan Support Material:Heavy-Duty Cast Iron Control Type: Bakelite Knobs Control Ignition Type: Electronic pulse ignition Voltage: 110V, 3-prong plug Cable Length: 4.5 Feet Installation Type: Built-in Eascookchef Stainless Steel Gas Cooktop 12 inch 2 Burners Power: 10,500 BTU + 5,000 BTU Fuel type: Natural Gas (NG) are preset and can be replaced with Liquefied Petroleum Gas (LPG) nozzles. Please note that: 1) Extra LPG Nozzles included in the pageage, the natural gas pressure regulator and the gas pipe are NOT included. 2)It is recommended that gas stove be installed and tested by professionals. 12 inch Gas Cooktop with pot stand Preset NG nozzles(extra 2 Propane nozzles) 1/2 NPT Connector and Elbow Connector with sealing rings Mounting brackets and screws Sealing strip Cut-out Template Board User Manual BAKELITE KNOB CONTROLS Melt-proof and anti-scalding bakelite knob controls,with child protection lock,need to press and rotate at the same time to ignite, preventing children from accidentally touching. THERMOCOUPLE PROTECTION Every burner unit is installed a thermocouple flame-out failure system (FFD), will automatically cut off the gas supply when the flame goes out unexpectedly, to avoid gas leakage. HEAVY-DUTY CAST IRON POT STAND One-piece heavy cast iron grate, easy to assemble and remove, will not deformed. The unique eight-claw structure is stronger and more stable than the four-claw and six-claw grate, can support the pot firmly, avoid letting the pan slip off. 12 Inch Dual Fuel Gas Cooktop, Easy To Install The size of the two burners is different, just put in the gas stove burner and burner cover, easy to assemble in minutes. The gas hob should be connected to the gas-supply by a registered installer. During installation it is essential to fit an approved gas tap to isolate the supply from the hob for the convenience of any subsequent removal or servicing. Once the hob was installed, make sure all the connections are properly sealed, use a soapy water to test, never use flame. Installation of built-in gas cooktop This gas cooktop is for bulit-in use only, please verify the gas cooktop is the right size for you. Product Dimensions: 11.6" W x 20.4" L x 3.9"H Cut out Dimensions: 10.7" Wx 18.9" L For a correct installation, the following precautions must be followed: a) Fixing fittings (brackets, screws) are provided to place the gas cooktop on work top, measure 0.79 to 1.58 inch in thickness. b) In the event the gas cooktop is not installed on a built-in oven, a wooden panel must be inserted for insulation.This panel must be placed at least 0.79 inch distance from the bottom of cooktop. c) When installing the gas cooktop on a built-in oven, the oven should be placed on two wooden strips; in the case of a joining cabinet surface, remember to leave a space of 1.78 x 22 inch at least from the back side.

Price: 79.99 USD

Location: Perris, California

End Time: 2024-03-23T08:22:06.000Z

Shipping Cost: 0 USD