Description: MADE IN THE USA 1936 CHEVY GRILLE EMBLEM DECAL SET EASY PEEL AND STICK TECHNOLOGYhigh performance industrial vinyl.quick and easy, no masking or messy paint to clean up,INSTALLS IN MINUTESwith this purchase you get:•1 BLUE CHEVROLET BOWTIE INSERT •2 RED HALF SHIELDS •2 BLUE LEFT & RIGHT STRIPES DECALS ONLY HARD PARTS ARE NOT INCLUDED IN THIS SALE INSTRUCTIONS:WATCH OUR YOU TUBE VIDEO SEARCH: DIY 1936 Chevy Grille emblem detailingapply to a clean cool to the touch emblemyou can use an exacto knife for best results however a toothpick or tweezers will do just fine1.Prop the emblem up on top of a wood block or spray can cap etc. It must be facing you 2.using an exacto knife, tweezers, toothpick or even just your fingers remove the top red shield portion from the backing. 3.place the left corner on first matching the lower straight edge to the decal. apply from left to right. 4.using an exacto knife, tweezers, toothpick or even just your fingers remove the bottom red shield portion from the backing. 5.place the left upper corner on first matching the upper straight edge to the decal. apply from left to right. 6.using an exacto knife, tweezers, toothpick or even just your fingers remove the left side blue pin stripe portion from the backing 7.place the inside end (thickest part) first matching the upper straight edge to the decal. apply from right to left. 8.using an exacto knife, tweezers, toothpick or even just your fingers remove the right side blue pin stripe portion from the backing 9.place the inside end (thickest part) first matching the upper straight edge to the decal. apply from right to left. 10.using an exacto knife, tweezers, toothpick or even just your fingers remove the right side of the blue bowtie and gently lay it over the emblem aligning the letters of the left side first. as you're laying down the decal rub your fingers over the decal to help it along in the adhering to the surface.11.remove the transfer tape slowly from left to right from the backing. 12.apply to the decal aligning the bottom edges first lay the decal down and from the middle out rub the entire decal in to all the crevices to make sure the decal adheres to the emblem and away from the transfer tape. 13.remove the transfer tape slowly from the bottom to the top angling it from the right. (remove more from the right side than the left). 14.remove the blue inserts for the shield and put them in place using your exacto knife, tweezers or finger tips, 15.once done applying the decals go over the entire set of decals rubbing your finger nails through all the crevices to ensure adherence.
Price: 12.99 USD
Location: Riverside, California
End Time: 2024-08-16T05:36:09.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Modified Item: No
Country/Region of Manufacture: United States
Custom Bundle: No
Interchange Part Number: Vintage chevy accessories gm accessories
Bundle Listing: Yes
Manufacturer Part Number: DG DISTRIBUTIONS
Placement on Vehicle: Front
Other Part Number: Good Roads Safety Star Fender Unity Delco Fenton
Brand: DG DISTRIBUTIONS
Non-Domestic Product: No
Type: Hood Panel
Vintage Part: Yes
