1964-1970 Ford Mustang II Weld-In IFS Suspension Crossmember Kit Autocross

Description: Upgrade your 1964 to 1970 Mustang front suspension by installing this weld in Mustang II crossmember, Requires tubular style control arms which are available in many of our hub to hub suspension kits, Works with both manual or power rack and pinions, Frame Front Boxing Plates are included for added strength/support, Inner fender panels are available separately to cover cut-out hole during installation 1964-70 Mustang Crossmember, Mustang II Front Suspension Upgrade Sku # 91034457-DLX Mfr. Part # 91034457-DLX Condition New Brand Speedway Motors Sold Each Details Info Vastly improved handling when compared to original suspension Front steer rack-and-pinion steering provides greater steering feel Complete weld-in assembly made from 3/16-inch steel adds strength Vertical inner uprights provide a strong design with twice the weld area Application specific crossmember and spring towers pre-welded to save installation time Allows for numerous control arm and disc brake kit upgrade options Compatible with manual and power rack-and-pinion steering systems Rack-and-pinion mounting points rotated rearward 20 degrees for steering shaft clearance Built-in anti-dive and bump steer correction mounting points Lower control arm pivot tubes and corner gussets not included Accepts stock Mustang II spindles or aftermarket drop spindles Provides increased engine bay room for modern engine swaps All welds ground smooth, saving you time and energy during installation Also fits 1967-1970 Mercury Cougar models as well Drastically Improve Your ’64-’70 Ford Mustang’s Handling with A Mustang II IFS Crossmember The original first generation Mustang front suspension, due to shared platform limitations, is compromise that doesn’t really do anything well. Wheel and tire fitment, braking, steering, and more are severely lacking, especially for today’s road speeds and modern engine power output. You’ll be in for some hair raising steering feel, or lack thereof, when you get up to highway speed with the old steering system and the Bendix-sourced power steering is getting harder and harder to find parts to keep it functional and leak free. Lastly, even getting a first generation Mustang aligned is tough these days, as most shops do not even mess with cars that use alignment shims. Solve all your issues by updating your classic first generation Mustang’s suspension for a well-engineered weld-in IFS solution utilizing the tried and true suspension geometry that debuted on the 1974 Mustang II. Built Strong to Handle the Road Ahead and Look Good Doing It Converting your ’64-’70 Mustang (or ’67-’70 Mercury Cougar) chassis to the Mustang II front suspension design with our crossmember kit brings you a whole different driving experience, one that will have you looking for any excuse to get out on the open road and take long trips to events you never attended before due to your Ford’s poor handling at modern highway speeds. Beginning with our 7 gauge steel (that’s a full 3/16 of an inch thick) boxed Mustang 2 front suspension crossmember that is fully welded with extended vertical uprights we have designed in anti-dive geometry to our crossmember and spring towers. Suspension travel, which yields a better ride, is upwards of five inches with our IFS and aligning the IFS can be handled easily by any competent alignment shop. Rack-and-pinion steering provides a quick and crisp steering effort at any road speed, and we have designed our rack mounting tabs to not only be optimized to eliminate bump steer but lay the steering rack back at a 20 degree angle to facilitate a lower steering shaft angle. This helps with exhaust manifold/header and overall engine clearance. The mounts accept both 15-1/2-inch and 16-inch on center rack mount spacing. Lastly, upgrading to a weld-in IFS Mustang 2 front end kit greatly enhances your braking options with the ability to run the most basic disc brake package all the way up to serious multi-piston racing disc brakes. Track width is dependent upon the brake package and control arms you choose, usually creating a 56-1/2- to 58-1/2-inch hub-to-hub IFS width with stock arm length. We do offer 5/8-inch narrower and control arms if needed for specific wheel placement in your application. As you can see, our crossmember is the perfect foundation for building the best Mustang II front suspension for your ’64-’70 Ford Mustang. Welds to Your Stock Frame Rails for Strength and Accuracy We understand that bolt-in suspension upgrades are easier for those that like to spin their own wrenches, but we designed our Mustang II crossmembers to be a weld-in solution to maintain their strength and integrity throughout the life of your ’64-’70 Ford Mustang. While we do encourage the use of a certified welder or chassis shop for installation, if you know your way around a measuring tape and have a MIG welder in your garage there’s really nothing stopping you from following our detailed instructions to fit and weld our Mustang II front suspension crossmember into your ’64-’70 Ford Mustang’s frame rails. Welding our Mustang II suspension crossmember into place is a straightforward installation and can be handled in just a few short hours once the old straight axle and front suspension have been removed. Our crossmember requires tubular lower control arms and will not work with stock style arms that utilize a strut rod. Note, lower control arm pivot tubes and gussets are not included, as they are typically included with tubular style lower control arm kits. We offer with and without disc brakes to help you complete your installation. Be sure to select a kit with to maintain proper ride height or purchase separately. We highly recommend our inner fender panels to provide a clean engine bay appearance. We offer them for the and . Lastly, if using a power rack-and-pinion steering unit you will need our for proper clearance along with the corresponding . Notes: Must use rear sump oil pan. Raised engine placement may require a high-rise hood. Cleveland engines will not work. Crossmember DOES NOT fit 1963-1965 Falcon. Charts (PDF) Installation Tips Drop: This varies and is dependent on application and options. Most kits drop the vehicle by 3-4". Drop spindles and running lower profile tires than stock also adds to the amount of drop that can be achieved. You can also fine tune your ride height with our Mustang II . Track Width: You may want to mount custom wheels to your Mustang II conversion and determining proper track width for your application is essential for figuring correct backspacing and overall ride stance. Standard wheel base is 56-1/2" with a 60" version available for trucks. Narrowed arms are available to move the wheel in by 5/8" on each side. See our PDF for various track width options. Assembly Notes: Either manual or power steering can be used with these crossmembers. The passenger side mount has a slot that will take the later model power rack. With all Mustang II aftermarket crossmembers, and must be used with the later (Fox-body) power rack. Engine Mounts: We offer for most popular V8 engines, including SBC, LS, SBF, and early Hemi. Note: Applications where the vehicle has fenders that mount directly on top of the frame, the fenders will require extensive modification to allow clearance for the upper cross member section. Specs Material Type Steel Sold in Quantity Kit Finish Natural Notes Includes crossmember, spring towers, and boxing plates. Material Thickness 0.19 Position Front Attachment Style Weld-on Crossmember Type Mustang II Crossmember Style Boxed Steering System Compatibility Manual/Power Rack and Pinion Control Arm Compatibility Tubular Material Gauge 7-gauge Tie Rod Extensions Required No MFG. Part # 91034457-DLX Reviews THE MUSTANG2 SUSPENSION CROSMEMBER WORKED PERFECT Rated by MUSTANGE JOE on May 07, 2021 Summary: NO PROBLEMS AT ALL WITH THE CROSMEMBER . WILL BE GETTING A FRONT DISC BRAKE KIT SOON Yes, I recommend this product. Perfect Fit Rated by Phil on March 04, 2021 Summary: Saves a lot of real estate in the engine compartment. Cleans up the engine compartment appearance. Yes, I recommend this product. Mustang Cross member Rated by Charles Worley on January 21, 2021 Summary: Top quality fabrication Yes, I recommend this product. Alot of work but id do it again Rated by 69 coupe on February 01, 2020 Summary: It was a great product, they give you the measurements and everything, alot of cutting and welding but once in its great. I just got around to putting my motor in and found out that i had to modify the steering rack to get the pan to clear but other than that Id buy it again. Yes, I recommend this product. I would buy again Rated by ak on January 26, 2020 Summary: fit perfect without any modifications Yes, I recommend this product. Related Items / Suggested Parts Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles Mustang II IFS, Narrow Tubular Control Arms, Stock Springs and Spindles Mustang II IFS, Narrow Control Arms, Stock Springs, Dropped Spindles Mustang II IFS, Std. Tubular A-Arms, Coilover Springs, Stock Spindles Mustang II IFS, Tubular Control Arms, Coilover Springs, Dropped Spindles Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles Mustang II IFS, Narrow Control Arms, Coilover Springs, Dropped Spindles Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 71 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 375.99 USD

Location: Lincoln, Nebraska

End Time: 2024-01-02T00:01:49.000Z

Shipping Cost: 0 USD