Description: This is a double cup holder for the 3rd gen Toyota 4Runner 1996-2002. It is made of ABS plastic through the use of a 3D printer and comes in the two factory colors which are tan “Oak” and the dark gray. It is available for the Automatic 2WD and Automatic 4WD. This WILL NOT fit on the manual transmission console. Our single cup holder will work on the manual trans. This WILL NOT fit on any year Tacoma. The cup holder will hold any fast food cup and most beverage container sizes. If you remove the black insert then you have a much larger diameter cup holder for items like a Nalgene orH Hydroflask bottle. The cell phone slot 3.25″ across and .65″ deep which will allow for most larger cell phones on the market with a case. There is also a pen holder. This single cup holder DOES allow for almost full movement of the passenger seat front to back. You lose about 1″ of forward seat movement which is very minimal. Install Instructions: There are 3 strips of 3m automotive adhesive already installed. This is the primary method of attachment. Make SURE the console is cleaned really well before you attach and use good force when attaching. The cup holder will not bond well if the console is not clean. 2 screws are also included to be used in the 2 screw holes. One is underneath the black insert and the other is on the outer corner of the bottom edge of the passenger side. The screws are an added insurance to ensure the cup holder is secure. I would highly encourage you to use the screws. Use a hand held screw driver to thread the screws in. Do not use a drill because you will probably strip the screw hole. Also, do not over tighten them by hand. Turn the screw until it is snug and then stop.
Price: 55 USD
Location: Whitley City, Kentucky
End Time: 2024-08-07T20:40:41.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: BH3D Printing
Manufacturer Part Number: BHC-0106
Country/Region of Manufacture: United States
Placement on Vehicle: Front
Available Variations
Color: Tan 4WD auto
Price: 55 USD
Available Quantity: 363
Quantity Sold: 337
Color: Tan 2WD Auto
Price: 55 USD
Available Quantity: 103
Quantity Sold: 54
Color: Gray 4WD auto
Price: 55 USD
Available Quantity: 108
Quantity Sold: 59
Color: Gray 2WD auto
Price: 55 USD
Available Quantity: 63
Quantity Sold: 14
Color: Black 4WD auto
Price: 55 USD
Available Quantity: 162
Quantity Sold: 115
Color: Black 2WD auto
Price: 55 USD
Available Quantity: 70
Quantity Sold: 21
