1S 2S 3S 4S 5S 6S 7S LiPo Lithium Battery Level Capacity Volts Indicator Tester

Description: 1S 2S 3S 4S 5S 6S 7S LiPo Lithium Battery Level Capacity Volts Indicator Tester Working voltage: 3V-34V Working current: 5mA Operating temperature: -20°C~50°C Colour:Blue / Green Voltage error: 2% (do not shoot if higher accuracy is required) Module Size: 31mm x 20mm Instructions:Connect the positive and negative terminals of the display board to the positive and negative terminals of the battery under test, and the digital tube will display the real-time battery power. 1. Electromagnetic power display, select the corresponding pad to tin, you can detect the voltage of the battery pack corresponding to 1S~8S, which is very convenient. (S1~S8 optional pads can only be connected to one type, and 2 or more simultaneous short-circuits are not allowed at the same time) 2. Application areas: Lithium batteries from 1S to 8S, batteries with corresponding voltages can be used (see the table for details) 3. How to use: Connect the positive and negative ports of the display board to the positive and negative ports of the battery under test, and the digital display tube will display the real-time battery level. Note that if several strings of lithium batteries are connected in series, tin should be connected to the corresponding pads.For example: if the test is a 2S battery (that is, two 3.7V lithium batteries are connected in series), you need to short-circuit the tin on the pad corresponding to S2 of the board 4. Pay attention to select the corresponding number of battery strings, and use it within the corresponding voltage range. The maximum limit should not exceed the voltage of 4.3*N. (For example, if the pad of S3 is selected to be tinned, the maximum voltage detected by the module should not exceed 4.3*3=12.9V)When the battery voltage is greater than N×3.3V, 1 grid of power is on (Note: N represents the number of battery cells) Tips. This model is not waterproof, if used outdoors please do a good job waterproof, because the electronic components need to be used in a dry environment.Lithium lead-acid nickel-hydrogen batteries can use the power display board, as long as the demand for voltage in the range of the parameter table are available. We only accept your Ebay Address,Please Make sure it's right.The items you ordered will be shipped out in 2 business day by Air Mail when your payment is clear. We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response. If item is defective, you can return for refund or exchange within 30 days after receiving.We will swap for a good one upon stock availability, or make a refund.Do not worry about it. We will try our best to deal with the problem to make you satisfied.Thanks in advance !!! If you are satisfied with our products and service, please help to leave "Positive Feedback" and "5 Perfect Stars" for us when you receive your items and we will do the same for you. Thanks in advance! If you have any questions regarding the transaction, before leaving any feedbacks, please contact us and give us an opportunity to find a solution. Thank you! On May 17, 2023 at 16:00:39 PDT, seller added the following information:

Price: 2.99 USD

Location: Dongguan, GD

End Time: 2024-02-17T23:54:44.000Z

Shipping Cost: 2.99 USD