Description: From the manufacturer Air Venting Procedures • Use only on hard, level surface capable of supporting the load. • Center load on saddle prior to lifting. • Support the vehicle with appropriate means immediately after lifting. • Do not move or dolly the vehicle while on the jack. • Lift only on areas of the vehicle as specified by the vehicle manufacturer. • With the jack in the fully lowered position, release valve open, remove oil filler plug. • Pump the handle rapidly several times. Reinstall oil filler plug. • Turn the handle/release valve clockwise to the closed position. • Pump the handle until the lift arm reaches maximum height and continue to pump several times to remove trapped air in the system. • Turn the handle/release valve counterclockwise in one full turn and lower lift arm to the lowest position. Use force on saddle if necessary. • Carefully and slowly loosen oil filler plug to release pressurized air. • Repeat above steps until trapped air is completely vented. Assembly • If two piece handles are provided, assemble the upper section into the lower section, line up the holes, insert and tighten • Insert the bottom end of handle into handle fork and securely tighten the bolt and washer. Ensure the handle can turn freely. Lifting • Turn the handle/release valve clockwise to the closed position. Do not over tighten. • Position the jack under the specified lift point. • Begin lifting by pumping the handle up and down. • Immediately after lifting, support the vehicle with appropriately rated jack stands. • Turn the handle/release valve slowly counterclockwise to lower the vehicle onto jack stands. Lowering Turn the handle/release valve clockwise to the closed position. Do not over tighten. • Pump the handle up and down to lift vehicle off jack stands. • Remove the jack stands. Do not get under or let anyone get under the vehicle while lowering. • Turn the handle/release valve slowly counterclockwise to lower the vehicle onto the ground. Product Description Floor jack has a2-1/2 ton (5,000 lb) load capacity and features a minimum lifting height of 5-7/8" and a maximum height of 20-7/8".The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.The floor jack has a large saddle surface area for better contact with the load being supported.Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning.
Price: 95.99 USD
Location: Shenzhen
End Time: 2024-09-26T08:53:23.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: SHINEFUTURE
Type: Floor Jack
