(2 PACK) MaxFire #4 Speedloaders [5-shot .357/.38] for select J-Frame & SP101

Description: This is for a package of Two MaxFire #4 Speedloaders. ✔NEW ✔Low Price ✔U.S. Shipping ✔Authorized Dealer Simply the fastest speedloader ever made. This rugged one-piece design is made out of tuff stuff and is to the Revolver what the magazine is to the Semi-Auto. Fast, sure reloads! Its features include unidirectional grooves and retention clips to hold the cartridges firmly in place allowing precision alignment with the cylinder chambers. It's flat on the forward leading side for maximum clearance, its handle is off set for ease of use with revolver speedloader unfriendly handles. A quick sideways pull releases the loader without spilling the cartridges. The MaxFire Advantage: Has no mechanical moving parts. No other speedloader has this advantage. Uses unidirectional grooves and retention clips to hold the cartridges firmly in place, allowing precision alignment of the cartridges and the chambers of the cylinder. No other speedloader has this advantage. Is stair stepped allowing speed of alignment of the cartridges and chambers of the revolver cylinder. No other speedloader has this advantage. Is flat on the forward side to obtain maximum clearance. No other speedloader has this advantage. Uses an offset handle to clear all protrusion from the revolver, such as the handle and the cylinder release. No other speedloader has this advantage. Uses a ring type finger handle and can be worn and retained on the finger before, during, and after reloading. No other speedloader has this advantage. For every action, there is an opposite and equal reaction. Because of the sideways pull to release the cartridges from the speedloader into the chambers of the cylinder. The opposite reaction in this case is the revolver cylinder auto closing when the cartridges are extracted. No other speedloader has this advantage. The MaxFire #4 is listed for the following 5-shot .38/.357 caliber revolvers: S&W 36, 37, 38, 40, 42, 49, 60, 340, 360, 640, 649, J-Frame Taurus 85, 605, 651, 850, 851, 905 Charter Arms 85, 605, 651. 850, 851, 905 Rossi 68 Ruger SP101 (not recommended for LCR) We stock the complete line of MaxFire revolver speedloaders--if you don't find the one you need in our eBay store, just ask. Notes: If your revolver is not listed, the speedloader may not fit--check with the gun manufacturer. If the cylinder dimensions are the same as a listed revolver, then they might use the same speedloader. Whether your gun is listed or not, with the cylinder fully open there must be a straight path for all rounds to load simultaneously, plus a small allowance for the thickness of the side of the speedloader. If your revolver's grip or cylinder release is in the way of the speedloader, the grip or cylinder release may need to be replaced or modified. Make sure the round count of your cylinder matches that of the speedloader. Listed above is the extent of what has been tested by MaxFire or reported by other customers as working--if your gun is not listed we have no further information. Stock images shown, may not be specific model nor quantity, see description for what you are buying. For MaxFire speedloader pouches, see https://www.ebay.com/itm/273407447872

Price: 26.5 USD

Location: Maryville, Illinois

End Time: 2024-01-23T20:46:39.000Z

Shipping Cost: 4.99 USD