Description: 2024 Launch X431 IMMO PLUS K~y Programming Tool Full System Diagnostic Scanner2024 LAUNCH X431 IMMO Plus Bidirectional Tool with X-PROG3 (Valued $800), K*y Pr0gramming, ECU Coding, Advanced Ver. of X431 IMMO Elite, Full Systems, 39+Services, Bi-Directional Control, 2 Yrs UpdateAbout this item🥇【2024 All-In-One X431 IMM0 Plus Diagnostic Tool】As the latest all-around scan tool, Launch X431 IMM0 Plus is a worthwhile investment for repair shops, locksmiths, etc. Owing multi-functions as 👍Read PIN Code 👍ECU Replacement 👍K*y Pr0gramming 👍Bi-Directional Control 👍ECU Coding 👍39+ Special Services 👍Full Systems Diagnostic 👍F~ree X-PROG3 Pr0grammer(800 b~ucks)) 👍100,000+ coverage 👍CANFD & DOIP 👍Download any apps on tablet👍2 Years Update🥇 【 Advance Pr0gramming Functions】As a professional pr0grammer, Launch X431 IMM0 Plus can help you: Read PIN/CS, Add/Delete k*y fobs, All k*ys lost, Reset/Code/Backup ECU, Replace Module (Compatible with Bosch/Continental/Siemens/Delco brands), Read/Delete Data, Read & Write EEPROM/MCU Chip, Read/Write EEPROM and FLASH of ENG ECU and TCM ECU, Read/Write MC9S12 Encryption Chip, Remote learning, etc. 🔯Functions above vary by cars.【Work with F~ree X-PROG 3 Pr0grammer(Valued 800 b~ucks)】Launch X431 IMM0 Plus Pr0gramming Tool using with X-PROG 3 can help you with the following: ENG/TCM ECU Cl-one & Chip C-opy;🥇 【ECU Coding, Customize Your Car in Minutes】LAUNCH X431 IMM0 PLUS newly apply ECU coding to rewrite code data to help activate/match/code/relearn the replaced ECU modules to the on-board systems. X431 IMM0 Plus scanner also can help you customize car faster as needed, optimize the specific performance of vehicles to improve fuel efficiency, unlock hidden features, deactivate annoying features. 2024 NEW ADDED FEATURE-PMI(Pr0grammable Module Installation) function For Ford /Lincoin/ Mazda etc.🥇 【Powerful Bi-Directional Control/Active Test】LAUNCH X431 IMM0 PLUS bi-directional scan tool helps you save time! It can perform various active tests by directly sending commands to ECUs and receiving status information, quickly make sense to pinpoint problems if a specific system/component/subsystem is functioning properly or not. Functioning well on Windows/Doors/Sunroofs/Coolant Fans/Valves/Headlamps/etc. Just try this LAUNCH bi-directional scanner to solve all the problems in minutes.🥇 【 Support 2024 Cars: CAN FD&DOIP+AUTOAUTH For FCA SGW 】2024 Launch X431 IMM0 Plus Scan tool supports CANFD & DOIP protocols(GM 2020 later, BMW F&G chassis, Volvo 2018 later, Land Rover & Jaguar 2017 later) (NOTE: NEED TRANSFER ADAPTER), support "Auto Auth" gateway for 2018 and beyond FCA cars, such as Chrysler, Dodge, Jeep, etc. New protocols boost 3X faster communication and cover more car models, saving you more than 200 b.ucks, LAUNCH X431 IMM0 PLUS can be your NO.1 choice.🥇 【Oe-Level Full System Diagnostic】Launch X431 IMM0 Plus covering global 99% models, supports diagnosis functions for full systems including ENG/TCM/BCM/TPMS/SRS/ABS/...such as read/clear fault codes, read data streams/car info, active test, special functions, ECU Coding, Initialization, etc, which can be realized Car fault diagnosis for almost models and all systems. ✅Full localized 25 Languages to use to choose native language without encountering any sort of language barrier.🥇 【39+ Special Resets Meet All Needs】LAUNCH X431 IMM0 Plus Scanner equipped with 39+ maintenance services to handle the most complex vehicles, performs well in various resets/learning/matching including Oil Reset/SAS Reset/EPB Reset/ABS Bleeding/Gear learning, etc., the device's one-touch AutoVIN & AutoScan functions make diagnose hidden problems a breeze. More than 100+ hidden features in 'Diagnose>Car Model>Special Function'. Note: functions vary by car model&year.👍【Extend Module】【After-Sales Policy】Launch X431 IMM0 Plus offers 5 years waranty, 60 days return&replace and 2 year f~ree update(worth 800 b~ucks). It can work normally even after update expired. Supports Remote Diagnostic, Diagnostic Feedback, 8-in-1 Data Stream Record and Playback, Battery Voltage Monitor, etc. Support TSGUN, BST360 battery tester, Endoscope, Oscilloscope, Multimeter, Wifi Printer and more extension modules.Product Description2024 NEWEST ALL-IN-ONE LAUNCH X431 IMM0 PLUS K*Y PR0GRAMMING TOOL & DIAGNOSTIC SCAN TOOL - 2 YEARS FREE UPDATEComprehensive IMM0 Plus Scanner: IMM0 Anti-Th/eft Functions + ECU Coding + Full Systems Diagnostic + Over 39 Advanced Special Services 🙋♂️🙋♂️>>> Q: Why is the LAUNCH X431 IMM0 Plus Scanner 200 more expensive than the IMM0 Elite? 👍👍 A: LAUNCH X431 IMM0 PLUS has the following advantages than IMM0 Elite: IMM0 Plus has ECU Coding while IMM0 Elite does not: a. Component Matching; b. ECU Online Coding; c. Personalization; d. Variant Coding(Offline Pr0gramming).IMM0 Plus has Advanced system diagnosis function while IMM0 Elite only has basic system diagnosis function, this will allow IMM0 Plus Scanner to do more features like: bidirectional control, adaption, relearn, calibration, initialization, etc.IMM0 Plus has many hidden special function under the vehicle menu, such as fuel injector balance, zero-point calibration, fuel trim reset(alcohol reset), crankshaft relearn, Idle learn Reset, etc. but IMM0 Elite does not. (Note:You can Explore 100+ service functions by accessing menus of “Local Diagnosis> Choose Brand&Year > Special Function”). LAUNCH X431 IMM0 Plus is the perfect solution for global users who demand affordable and powerful imm0 k*y pr0gramming tool, which combines advanced k*y pr0gramming, all systems diagnostics, and advanced services in one Android based 8.0 inch touchscreen tablet, provides you with superior special functions by a Android 10.0 OS, a 2.0GHz 4-core high-efficiency processor, a 4GB RAM+64GB ROM large memory, and a 12300mAh high-endurance battery, using USB type A/USB type C connectors and DBSCar VII VCI connector can make the process of cloning and matching faster and more stable, DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. It is more valuable than other Launch normal tablet connector, as it's the only unique and advanced connector of the current Launch Tech CO.,LTD scanner tablet on the market. [K*y Pr0gramming] Add/Delete k*y Fobs, k*y Relearn, Disable Lost k*y , EEPROM Read/Write, MCU Read/Write, IMM0 Read/Write, Engine Read/Write, etc. It provides guided functions with step-by-step instructions for K*y Learning, Remote Control Learning, and Remote Control Add, etc.[Bi-directional Control] Request information or command a actuator to perform specific tests, such as cycling the a/c clutch on/off, perform evap test and more tests to solve the specific repairing work.[Anti-Th/eft IMM0 Function] Read PIN; K*y Generation, K*y Learning, Remote Learning, K*y Matching, IMM0 ECU Reset/Adaption, IMM0 Data Backup/Restore, Unlock Used Radio, etc.[Full System Diagnostic] Read codes/live data/module info, Clear codes, freeze frame and more on ENG/ABS/AT/SAS/SRS/TPMS/EPB/IMM0/BMS/... Systems.[ECU Coding] ECU Coding can rematch, relearn, recode the new ecu after replacing ecu, and unlock hidden function, forbid annoying features, customize OE-settings, etc.[Support CANFD/DOIP Protocols] Support CAN FD protocol cars connecting directly, need Purchase extra DOIP Connector, the application of new protocols CAN FD/DoIP boosts 2x faster vehicle communication between modules, get much higher data rates & faster diagnostic speed than ever. [AutoAuth for FCA SGW] Use the latest software update function AutoAuth to provide diagnosis, active testing, etc., making the diagnostics more secure.Applicable to FCA vehicles equipped with a security gateway module (SGW) in 2017 and later.[Free X-PROG 3 K*y Pr0gramming Tool(Valued 800)] Compatible with X-PROG 3 enables reading and writing EEPROM, generating special k*ys, anti-th/eft type identification, remote control matching, k*y chip reading and matching, anti-th/eft password reading, new/used module replacement and ECU Module C-lone for more than 5000+ car models.[2 Years Free Update(Valued 800)] Provides 2 Years free update, One-Touch update via WiFi to enjoy more functions, get wider available vehicle coverage, add more languages, and improve the performance. [Extension Module] Support BST360 Battery Tester, TSGUN, VSP600 Endoscope, O2-2 Oscilloscope, Multimeter, Wifi Printer and more extension modules.[K*y Pr0grammer] New extended module has been added on 2023 August 29 - K*y Pr0grammer(Package doesn't include), Identify car k*y chips and generate various types of chip models from super remotes, read the remote control frequency of car k*ys, and generate remote control devices for different car models from various types of super remotes. (PS: Need extra purchase X431 K*y Pr0grammer & 4 K*ys Set) Provide Bidirectional Capability of Testing Components & OE-Level Diagnosis of All Systems 🚘What you will get in the package? Package Included: 2024 LAUNCH X431 IMM0 Plus tablet, Advanced DBSCar VII VCI Connector, Diagnostic Cable, Password Envelope, X-PROG 3 Pr0grammer Kit, Power Adaptor, Type-A to Type-C USB Cable, Battery Clamps Cable, Cigarette,Lighter Cable, OBD I Adaptor Box, Non-16pin Adaptor Cable Kit. Systems Diagnose - Read/Clear Codes, 8-in-1 Live Data Stream, etc. LAUNCH X431 IMM0 Plus automotive scanner can scan 120+ modules like ECM(engine), TCM(Transmission), ABS, SRS, Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset) and so on to perform OE level diagnostics to Read Codes, Clear Codes, Smog Test, Read Live Data, Freeze Frame, Evap Test, DTC Look Up, Detection Help, On-Board Monitor Test Mode, I/M Readiness Check, O.2 Sensor Test, Retrieve Ecu Information, Matching & Adaptations, Ecu Coding, allows You To Get A Faster And More Accurate Test Result On All Electronic Systems. Powerful Bidirectional Control (Active Tests) – Diagnose the Real Cause of the Troubles with Only 5 Minutes LAUNCH X431 IMM0 Plus automotive scanner can perform Bi-directional Control over various car systems and components to determine the integrity of a system or parts like ABS, SRS, window, door, roof, by reading the ECU data, or by monitoring the operation of the actuators. Bi-Directional Control is a feature that allows for two-way communication and control between scanner and car systems. It enables drive solenoids and actuators for active testing, sending commands to the system/component to test its operating status without using the vehicle controls. By utilizing Bi-Directional Control, car dealer, auto repair shop, and so on can actively monitor and control the behavior of a system, let you quickly understand whether a specific system, component, or subsystem is operating normally. It provides a more comprehensive and interactive approach to testing and troubleshooting, allowing for efficient identification and resolution of issues, pinpoint issues and greatly improve diagnostic efficiency.Frequently-used Active Tests including: Evap Tests/ Purge Solenoid/ Fuel Injector Test/ Cycling A/C Clutch Relay/ Cycling Abs Motor Pump/ Cooling Fan Test/ Headlamp Test/ Sunroof/ Operate Mirrors/ Turn On The Sound Horn/ Turn On The Radiator Fan/ Open/Close Windows/ Turn On/Off The Lights/ Test Door Lock Actuators/ A/C Compressor Activation/ Modulate The Throttle/ Compression Test/ Turn On/Off Front And Rear Side Acm Solenoid/ Turn The Fuel Pump On And Off/ Cycling The A/C/ Clutch On And Off/ Left Clutch Electromagnetic Coil Test/ Acceleration Device Test/ Oil Pressure Control Test/ Dynamic Camera Aiming/ Vehicle Level Position Calibration/ Brake Vacuum Pump/ Inlet And Outlet Valve Tests/ Open Brakes Tests/ Parking Brake Botors/ Wheel Speed Sensor Supply/... ECU Cloning - Cost-effective ECU Module Replacement ECU cloning is a valuable solution in various scenarios. For instance, if the electronic control unit (ECU) of your vehicle becomes defective or damaged, cloning the original ECU can be a cost-effective alternative to purchasing a new one. This ensures that your vehicle operates smoothly without any significant disruptions. Additionally, ECU cloning can assist in transferring existing pr0gramming and settings to a new ECU for performance upgrades or feature additions, saving time and money compared to repr0gramming from scratch. Furthermore, having a c-loned ECU as backup can minimize downtime and quickly get you back on the road in case of emergencies when the original malfunctions or fails. Lastly, keeping a c-loned ECU in a secure location provides an extra layer of protection against th/eft or tampering. Widely Brand Coverage: Supports Engine & Gearbox ECU C-lone for 170+ brands and 5000+ models, such as VW, Bentley, Citroen, Jaguar, Mercedes-Benz, BMW, Porsche, Volvo, Land Rover, Renault, GM, Ford, Lincoln, Maserati, Ferrari, Opel, Honda, Kia, Nissan, Toyota, Mitsubishi, Subaru, etc, working on Bosch/CONTINENTAL/SIEMENS/DELCO/ZF/GETRAG/Temic/...Exclusive ECU Supporting: Bosch ECM: EDC16XX, EDC17XX, MD1CSXXX, MD1CPXXX, ME17.X.X, MED17.X.X, MEVD17.X.X, MG1CSXXX, MG1CPXXX, etc. Continental/Siemens ECM: MSDXX, MSVXX, etc. Continental ECM: SDIX, SIM271XXX, SIMOS 8.X, etc. ZF TCM: 6HPXX, 8HPXX, 7DCT300, ALXXX, etc. GETRAG TCM: DPS6/DC4, DKG, MPS6, VGSX, etc. Temic TCM: DLXXX, DQXXX, VL381, etc. DELCO: GMEXX/TXX, GM6TXX/6LXX, etc.Revised sentence: "Fast Data Retrieval: LAUNCH X431 IMM0 Elite enables direct extraction of engine ECU data from the k*y in BENCH mode, eliminating the need for shell disassembly. Warm Notice: it's essential to consult with a professional automotive technicianst to determine if ECU cloning is the right solution for your specific situation, please feel free to reach out us at kingbolen-sales02@hotmail. com if you have any doubts.WHAT CAN ECU CODING FEATURE ON LAUNCH X431 IMM0 PLUS SCANNER DO FOR YOU?>>>ECU Coding Customize Your Car Easily, Make Your Work Easier, Help You Win More Businesses Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. ECU coding enables multiple car systems to recognize each other and then the actuators can start to work. LAUNCH X431 IMM0 PLUS is equipped with advanced ECU coding function for addressing the following issues: ECU Online Coding: Online Coding functions directly connect to OEM server, quickly obtain the OEM online data from the server when the code data is lost, but Only Compatible with VW/ Audi/ Skoda/ Seat. Such as 1.Acoustical confirmation 2.Active Rear Spoiler 3.SiriusXM coding 4. Digital speedometer coding 5.Start & Stop button coding 6. Remote window control unlocking 7.Acoustic pedestrian protection 8.Active Cruise Control 9. Air conditioning setting memory 10.Automatic Air Recirculation 11.Ambient lighting brightness, And More ..... Component Matching: After replacing faulty actuators or specific parts, it is necessary to utilize this function to generate a new code and detect the new actuators, such as Matching, relearning, calibration, or initialization adaptive data for certain components. Simply adhere to the on-screen instructions to erase the original memories saved in the ECU, and input the adaptive data into designated components. LAUNCH X431 IMM0 Plus is a professional-grade diagnostic tool that will assist you in establishing stable communication between the new ECU modules with accuracy. Personalization: Unlock hidden features,deactivate annoying features. Modify the code to 1) personalize vehicle settings, 2) unlock vehicle potential, 3) activate advanced functions, and 4) disable certain features. Compatible with vehicles such as Mercedes-Benz, BMW, Porsche, etc. Such as 1. Deactivating the Start/Stop function, 2. Beeping when unlocking and locking, 3. Disable seatbelt warning sounds, 4. Mirrors automatically folding and unfolding, and more. Variant Coding(Offline Pr0gramming): Variant coding involves pr0gramming ECUs to accommodate different vehicle variants, such as left-hand drive or right-hand drive. In some states/countries, automatic headlight activation while driving is mandatory, resulting in yet another vehicle variant. Variant coding encompasses the activation and deactivation of software-driven functions. Compatible with Nissan, Nissan-GTR, Infiniti, Hyundai, etc. Customize OE-Settings(Retrofit/Modification): Designed to enhance vehicle performance and increase business profits, revise the default settings to modify the vehicle's original behavior, for instance, upgrade halogen fog lamps to xenon fog lamps, replace the battery with a higher capacity one, and install larger tires. Additionally, incorporate adaptive cruise control, tire pressure monitoring system, and reversing radar through modification. Online Calibration: Connect to the online server to perform a special adjusting function. Compatible with VW, Audi, Skoda, Seat, etc. Note: ECU Coding is not universally compatible with all vehicles! Please provide us VIN number/year/model via kingbolen-sales02@ hotmail.com to check compatibility first.AFFORDABLE PROFESSIONAL K*Y PR0GRAMMING TOOL & ADVANCED IMM0 FUNCTION SCANNERWorking With X-PROG 3 For Further Extended Pr0gramming Capacibility >>>Why is an ideal choice for a repair shop? What can LAUNCH X431 IMM0 Plus bidirectional scan tool do? Deep Diagnosis for all makers, all modules access to ALL vehicle systems and subsystems, to perform a comprehensive scanning on ECUs, Cover 99% of OBDII Vehicles after 1996 in the world. >>>LAUNCH X431 IMM0 Plus is specifically designed for professional repair mechanics and locksmiths, making it the top choice for anti-th/eft services. With its comprehensive IMM0 diagnostic functions and k*y pr0gramming capabilities, this tool is able to effectively address various vehicle k*y issues, such as replacing new k*ys, adding spare k*ys, enhancing anti-th/eft features, and deleting lost k*y data. LAUNCH X431 IMM0 Plus supports over 150 vehicle brands, including more than 20,000 American, Asian, and European models. It is capable of reading and writing mainstream k*y chips such as EEPROM, MCU, FLASH, and ECU, and enables module replacement and cloning for over 5,000 car models. >>>Launch X431 PROG3 k*y pr0grammer, a new generation of imm0bilizer functional partner, integrates advanced & complete IMM0-related functions and meet all the k*y needs: k*y matching/coping, anti-th/eft IC reading/writing, anti-th/eft type identification, 1200+ models of chip reading/writing, reading/writing Engine/Gearbox ECUs without disassembling the shell, remote control matching, anti-th/eft component replacement, etc. IMM0 Functions 1. Read PIN/CS(All K*y Lost); 2. K*y Generation; 3. K*y & Remote Learning; 4. Anti-Th/eft Module Replace; 5. Engine/Gearbox ECU Replacement Cloning; 6. IMM0 ECU Reset/Adaptation/Refresh/Coding; 6. Read&Write EEPROM/MCU Chip; 7. ECM MCU Reflash & C-lone; 8. Generate Dealer K*ys; 9. Renew/Read/Write Transponder; 10. Back/Restore IMM0 Data; 11. Cloning in BENCH Mode without Diassembly; ... K*y Pr0gramming 1. Add/Delete/Disable a K*y Fob; 2. All K*ys Lost; 3. Pr0gram a blank k*y fob; 4. Rewrite smart k*ys; ... XPROG 3 Functions 1. Car k*y slot-Place the car k*y to perform the k*y matching function; 2.DB26-Connect to various anti-th/eft wiring harnesses, such as the data collection line for the fourth generation of instrument k*ys, etc; 3. Mercedes-Benz k*y infrared slot-Place the Mercedes-Benz infrared k*y to perform the k*y matching function; 4. Car k*y chip hole-Place the k*y chip to perform k*y matching; 5. Status indicator-Power indicator; 6.DIY slot-Connect the anti-th/eft ECU pin through the cable to read and write data; 7. Locker Install chip burning socket-Complete EEPROM or MCU data read and write operations; 8.DC12V power supply-Connect DC12 power supply; 9.DB15-Connect the main wiring;... X431 IMM0 Plus Work with XPROG 3 1. BENCH Mode Reading; 2. ECU Replacement/Cloning; 3. Boot Mode Read Engine; 4. Read/Write CAS4+, FEM; 5. Read & Write K*y Chip; 6. Read MEDI7; 7. Read & Write EEPROM; 8. BOSCH Engine Replacement; 9. IMM0 ECU Reset/Coding; 10. Read BMW Engine ISN Code; 11. Read PIN Code; 12. IMM0 Module Replacement; 13. Add Transponder/Smart K*y; 14. Read/Write/Backup IMM0 Data; 15. All K*y Lost; 16. Read & Write Mercedes Benz Infrared K*ys; 17. Disable Lost K*ys; 18. MQB Gearbox Replacement for VW & Audi; 19. Add K*ey; 20. BMW E Chassis 8HP Gearbox ECU Pr0gram Wiping; 21. Backup EEPROM Data; ... 2024 New Added Pr0grammable Module Installation Enables you to replicate data from the original module and transfer it to the new unit, facilitating the completion of module replacement. Only supports For Ford /Lincoin/ Mazda etc.>>>All-in-One K*y Pr0gramming Tool & Diagnostic Services - Saving maintenance time and money for you, keep growing with UPDATES Brake Reset: After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.Oil Reset: Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.SAS Reset: Learn to correct the angle and solve the problem of the steering angle of the steering wheel.Battery Matching: Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.ABS Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.SUS Reset : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.TPMS Reset: When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.GEAR Reset: The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.Injector Reset (Injector Coding): The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.AFS Reset: It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.Throttle Adaptation: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state. 12. AC System Relearn, 13. E.GR Adaption, 14. AdBlue Reset, 15. Air Level Calibration, 16. Crank/Cam Position Sensor Adaptive Learning, 17. D.PF Regeneration, 18. G.PF Regeneration, 19. Gearbox Relearn, 20. HV Battery Diagnostics, 21. NOX Sensor Reset, 22. Intelligent Cruise Control System, 23. Language Change, 24. Motor Angle Calibration, 25. Seat Occupancy Calibration, 26. Stop/Start Reset, 27. Sunroof Reset, 28. Tire Reset, 29. Transport Mode, 30. Windows Calibration, 31. Clutch Matching, 32. Turbocharging Matching, 33. Gateway Module Data Calibration, 34. ECU Reset, 35. Rainfall Light Sensor, 36. Imm0biliser Reset, 37. CAS Reset, 38. ALBBF initialization, 39. Actuator Recalibration, 40. HVAC Control Module Calibrate, 41. Engine Speed Control, 42. Fuel Trim Reset(Acohol Content Reset), 43. Fule Trim Enable, 44. Hybrid Control Compression Test, 45. Cylinder Power Balance, 46. Fuel Injector Balance, 47. Crankshaft Sensors Relearn, 48. Idle learn Reset, 49. VGT Turbo Calibration, 50. Zero Point Calibration, 51. VIN Registration(Write), 52. ABS Initialization, 53. Headlamp, 54. Coolant Bleeding, etc. More Features Keep Growing... Explore More than 100+ Special Services Not only you can find 39 Special Reset in Service Function on home page, but you can also find more Special Reset on Local Diagnose>Choose brand&year>Automatically Search>System Selection>ECM/BMC/...>Special Function, you can find more than 100 or even 200+ hidden advanced functions under vehicle menu totally. (IMM0 Elite doesn't have this feature, it only has total 39 resets ). PS: All features vary by car models and years, kindly reach us via address: kingbolen-sales02@hotmail . com to get fast reply.Cover almost all 1996-2024 Worldwide Vehicles, Continuously Growing With Updates >>>WARM PROMPT: The logo and brand name of BMW/FORD/CHRYSLER and more appeared on the detail page and image is to describe the scanner is compatible with those brands vehicles, we are not selling products manufactured or sold from these car brands. Please let us know if you have any questions, you can reach out to kingbolen-sales02 (add hotmail suffix). >>>Support 99% Vehicles Diagnostic Function and IMM0 Function such as: Fit for VW, Audi, Bentley, Citroen, Jaguar, Mercedes-Benz, BMW, Porsche, Volvo, Land Rover, Renault, GM, Ford, Lincoln, Ferrari, Opel, Honda, Kia, Nissan, Toyota, Mitsubishi, Subaru, Sprinter, Peugeot Citroen, Isuzu, Hyundai, BYD, Chrysler, Maserati, Mazda, Fiat, Suzuki and more. LAUNCH X431 IMM0 PLUS is an anti-th/eft matching tool, which supports the ECM and TCM module's c-lone and support module main supplier BOSCH, Continental and/or Siemens, DELCO, ZF, GETRAG and Temic etc. The advantages of anti-th/eft module replacement and anti-th/eft module cloning for sperate brand are listed as follows: For VW 1. Volkswagen Audi IV and V k*y matching; 2. The fourth generation of Volkswagen instruments are completely lost (partially); 3. The fourth generation of Volkswagen free account is lost (part); 4. Audi 5th generation steering column chip reading and writing; 5. Reads the fourth generation MED17/EDC17; 6. Replacement of Volkswagen Audi MQB engine, gearbox and steering column; 7. Volkswagen Audi 5th generation and MQB transmission FLASH and EEPROM reading and writing; 8. Volkswagen Audi BOSCH engine c-lone; 9.Volkswagen Audi Siemens engine c-lone; 10. The function of adding and losing all the k*ys of the fourth generation instrument of Volkswagen Online; 11. MQB k*y increase and k*y loss function of Volkswagen online fourth-generation instrument; 12. The fourth generation of Volkswagen instrument (5ND920873B) lost all its k*ys and replaced the instrument; 13. The UDS engine replacement function after 2014, the fourth generation instrument+the fifth generation Bosch engine (the original vehicle engine is not required) For Benz 1. Benz k*y matching (FBS3); 2. Benz engine, gearbox wiping (FBS3); 3. Erase ECU data of Benz gear shift computer (FBS3 and before); 4. Benz engine c-lone (FBS4); 5. Benz Geatbox C-lone (FBS4); 6. Benz k*y added calculation password (FBS3); 7. Benz lost all k*ys calculation password (FBS3); 8. Benz lock replacement (FBS3) For BMW 1. BMW (CAS1, CAS2, CAS3, CAS4, FEM/BDC); 2. BMW engine ISN code reading; 3. Erase ECU data of BMW E chassis 8HP gearbox; 4. BMW E chassis 8HP gearbox c-lone; 5. BMW F chassis 6HP gearbox wiping/c-lone; 6. BMW F/G chassis 8HP gearbox c-lone; 7. Erase ECU data of BMW F/G chassis 8HP gearbox ; 8. BMW engine replacement; 9. BMW BOSCH engine c-lone; 10. BMW Siemens engine c-lone For Porsche 1. Porsche 2011-2017 k*y matching; 2. Porsche front-end and back-end computer cloning; 3. Porsche Siemens engine computer c-lone; 4. Porsche battery data repair For More 1. US Ford anti-th/eft initialization; 2. US GM Module (anti-th/eft) cloning; 3. Most models of Peugeot Citroen are read by the engine ECU anti-th/eft password; 4. Volvo Link BCM anti-th/eft and password reading; 5. Toyota; 6. Honda; 7. Nissan; 8. Mitsubishi; 9. Kia; 10. HYUDNAI; 11. China Ford anti-th/eft module pr0gramming; 12. China Ford anti-th/eft module anti-th/eft initialization; 13. China GM Pr0gramming, configuration, setting and deletion; 14. Pr0gramming, setting and setting of Roewe anti-th/eft system; 15. Pr0gramming, setting and setting of MG anti-th/eft system; 16. Second-hand new Yinglang, new Kaiyue and other anti-th/eft passwords 17. Great Wall Motors PIN reading and anti-th/eft matching; 18. Dongfeng Fengshen reading PIN and anti-th/eft matching; 19. Dongfeng Fengxing PIN reading and anti-th/eft matching; 20. Geely Car PIN reading and anti-th/eft matching; 21 FAW car PIN reading and anti-th/eft matching; 22. Zhengzhou Nissan PIN reading and anti-th/eft matching; More Features Keep Growing..>>>K*y Pr0gramming Tool with Everything, Which Exactly Entire Automotive Shop Needs [Remote Diagnosis Support] Remote diagnosis can realize real-time communication between equipment and equipment or between equipment and computer, complete vehicle remote diagnosis, and make it a reality for repair technicians to diagnose vehicles thousands of miles away. You can seek help from other mechanics or experienced friends to complete vehicle remote diagnosis and make it a reality for repair technicians to diagnose vehicles thousands of miles away.[Online Diagnostic Advice] LAUNCH engineers will help you troubleshoot problems. Customized exclusive beta version software for your car in this function.[AutoVIN Scan] This option allows an automatic VIN detection when LAUNCH X431 IMM0 Plus Scan Tool is connected to the vehicle’s DLC successfully, it can identify car brand, model, and year info to shorten the navigation processee, no longer waste time to manually inputting VIN code.[Diagnostic Record&Playback] LAUNCH X431 IMM0 Plus K*y Pr0gramming car diagnostic scanner records the every details of diagnostic session, provides a quick access to the vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch, you can record/ review/ playback live data anytime.[8-in-1 Live Data Stream] There are 3 ways to view the data, you can choose the one that suits you best. Value–it is the default mode that displays the parameters in texts and shows them in list format. Graph–displays the parameters in waveform graphs. Combine–this is the most used in graph merge status for data comparison. In this case, different items are marked in different colors. (Combine up to 8 options)You can also record the data stream and playback the data.[Diagnostic Report & Feedback] Once the diagnostic process is successfully finished, a diagnostic report will be automatically generated and sent to your mailbox. You can download it, and then print it to share it with others.[Email Report Share & Print] ALL MODULE Diagnose automatic IMM0 Plus scanning tool enables diagnostic technicians to generate diagnostic reports before and after car diagnosis and repair service, so that the diagnostic reports can be printed out or sent to customers through the Internet (email) and compared or shared with customers.[DCT Lookup] DTC Lookup is used to search for definitions of DTCs stored in the DTC libraryand for code breaker information, and Code Breaker is used to provide descriptions of DTCs and helpful tips to deal with DTCs.It is useful for technicians to find the root cause of trouble code faster, saving diagnosis and repair time.[Screen Snapshot] Snapshot graphing shows you any failures or glitches at a glance, you can share it via email to ask for help.[Rear 8MP Camera] X431 IMM0 Plus provides rear 8MP camera, which is more convenient for car owners record cars info and diagnose data.[Settings] Settings menu can set some normal options, such as brightness of screen, turn of/off device k*y sound, connect network ( it was needed when perform most functions), etc.[Firmware Fix] If the product encounters technical problems, such as the device prompt code error, the device suddenly cannot automatically read the VIN code, the device recognizes the vehicle model or year wrong, etc, you can try the firmware repair first, it can usually be solved.[Multiple Languages] Supports 25+ menu language, on the home screen, tap Settings > System > Language & input >Languages, then you can change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.[Extension Module] You can perform more comprehensive vehicle inspections with LAUNCH X431 IMM0 Plus, X-431 TSGUN(Diagnostic/Activate all brands sensors, Relearn & Pr0gram LAUNCH sensors), X431 BST360 Bluetooth Battery Tester(Charging Health Test/Battery Health Test/Start System Test), X431 Oscilloscope(quickly acquire the circuit signal, and slowly display the waveform for easier analysis), VSP600 Videoscope(Examine unseen parts of engine, such as spark plug holes, engine-cylinder, small parts), X431 PRinter(Print out diagnostics data/Reports), S2-2 SensorBox(diagnose and simulate vehicle sensor faults quickly) And more..[Mall Service] LAUNCH X431 IMM0 Plus scanner supports some Motorcycle Software at mall which need extra purchase. You can find BMW motorcycle software, Suzuki motorcycle software, Honda motorcycle software, Yamaha motorcycle software and more motorcycle software in the "MALL" SERVICE. (Note: You also need to buy matched diagnostic mainline to use the IMM0 function of the corresponding motorcycle model.)PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of sellingDelivery details Shipping Order will be shipped within 1 business day after payment confirmed. We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse. From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shipping Delivery time varies from 2 to 6 business days. From our China warehouse via UPS DHL or Fedex Delivery time varies from 5-12 business days. We will ship according to your payment address. Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any.Terms of salesWe are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories.Please contact us firstly when you need warranty service.In case an item arrives faulty, please contact us in 30 days and keep it unused.We will instruct you on how to return and get refund or replacement.If after 30 days, or the item has been used, we have the right to decline your claim.Items should be returned on buyers' cost for repair or replacement. About usWho We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands, and more brands will be show in our store in near future. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details. Contact usOur customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.
Price: 1309 USD
Location: Perth Amboy, New Jersey
End Time: 2024-12-19T10:45:05.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Type: K~y Programming OBD2 Scanner
Model: Launch X431 IMM0 Plus
For: For GM & FORD
Top selling items at store: LAUNCH X431 V PROS V PRO3S PAD V PRO 5 PADIII PADVII IM608
🏆🏆Update: 2-Year Free Update
Operating System: Android 10.0
Processor: 2.0GHz 4-Core
Screen: 8-inch LED
Resolution: 1280*800
RAM+ROM: 4GB+64GB
Battery: 6300mAh
CANFD: Support
✅Advantages 1: Advanced IMM0 & K~y Programming
✅Advantages 2: OE Level All Systems Diagnostics
✅Advantages 3: Bi-Directional Control
✅Advantages 4: 39+ Service Functions
✅Advantages 5: Remote Diagnosis
✅Advantages 6: WORK WITH X-PROG 3
✅Advantages 7: IMM0 E~CU Module Clone
Big surprise XMAS GIFT!!!: A set of K~y Programmer and Remote Maker with 4 Universal Remotes
Brand: LAUNCH
Manufacturer Part Number: LAUNCH X431 PRO5 V PROS PRO3S+ V+
OBD Interface: CAN, EOBD, OBD, OBDII
Supported System: ABS, DPF, EPB, SAS, SRS, TPMS
Connectivity: WiFi
Vehicle Type: Passenger Vehicle
Accessories: Adapter Cable, Carrying Case, USB Cable, User Guide
Features: Backlit Display, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly, Built-In Battery, Clone, Remote Diagnosis
Warranty: 5 Year
UPC: 849438003524
