Description: We ship your orders on time and without delay. We guarantee that you will receive your order within the period specified below. Buying from us - you are guaranteed to get a quality automotive original tape 3M™.Each tape is packaged in original packaging. Buy only quality product! --- Description --- 3M™ Acrylic Plus Tape PT1100 length 5.5 yards, thick 1.14 mm is a black, double-coated acrylic plus tape designed for the attachment of automotive exterior trim parts such as body side moldings and claddings. Designed for Long-lasting Performance Even to Challenging Automotive Substrates Developed specifically for attaching rigid exterior trim and other parts to automotive substrates, our 3M™ Acrylic Plus Tape PT1100 features a 1.14 mm acrylic foam core with two different adhesives — one for each side of the application. Liner-side adhesive is formulated for very high initial and final adhesion to scratch and mar-resistant paint systems. Non-liner-side adhesive is excellent for bonding to automotive trim and other components.The viscoelastic foam core conforms well even to complex geometries. It is engineered for stress relaxation when exposed to high stress loads, and maintains bond-line aesthetics under normal stress loads. Features a red, 3M™ branded, removable 2 mil thick liner with PE on one side, that allows for heat bond tabbing to the tape. Black color and low elongation properties improve the bond-line appearance of the attached part. FEATURES:Length 5 m.(5.5 yards) X Thick 1.14 mm.(0.043 inch) X six tape width options 6 mm.(0.24 inch) & 9 mm.(0.35 inch) & 12 mm.(0.47 inch) & 15 mm.(0.59 inch) & 20 mm.(0.79 inch) & 25 mm.(1 inch) 100% brand newFeatures two adhesives – one on each side of the tape for effective bondingAcrylic adhesive is formulated for high adhesive build rate on automotive substratesNon-liner-side adhesive delivers excellent adhesion to metal and plastic partsLiner-side adhesive is designed for traditional, LSE and mar-resistant automotive paint systemsConformable closed cell 1.14 mm acrylic foam core delivers excellent stress relaxation under loadLiner is silicone-coated on both sides to enable easy releaseT-liner is suitable for heat-bond and other PSA tabbingBlack color provides good bond-line appearance comfortableIndustrial quality mounting tapeWeather resistant for use outdoors or indoorsComfortable. Can be used on textured surfaces, such as painted cement or brickStrong by carwashGreat for use on claddings, moldings, and emblems.Paste car curtains, Car lights, Car body, car accessories, etcRECOMMENDATION FOR APPLICATION TAPE:1. The optimum temperature for applying tapes is +64°F...+77°F (temperature of the tape, working space and mounting surface). Before use, the tape must be kept in the working room conditions for at least a day.2. The mounting surface must be clean, free from grease and dry. When degreasing, as a cloth, you should use materials that do not leave fibers and threads on the mounting surface.3. Before applying the tape, it is recommended to apply 3M adhesion promoter to the mounting surface. The primer is applied evenly in a thin layer. After it dries (maximum 5 minutes) - tape is applied. If the interval between primer application and tape application exceeds 30 minutes, then primer application should be repeated.4. Mount the tape on the product holding it by the ends and not touching the sticky side. First, apply 1-2 cm of adhesive tape to the mounting surface and press down. Gradually apply tape over the entire length of the mounting surface, eliminating tensile force. Stretching force leads to peeling of the adhesive tape from the liner (protective adhesive layer). After applying the tape, roll it with a rubber roller with a force of at least three kilograms.5. The mounting surface of the body must be prepared (see point 2). Before mounting the product on the body - it is necessary to remove the liner from the adhesive tape. Avoid touching the adhesive layer during installation of the product to the body. After fixing the product on the body - roll with a roller with no effort less than three kilograms in areas of application tape.6. 100% bonding strength is achieved 72 hours after installation under temperature conditions (see point 1).7. If necessary, re-glue new tape is used. In this case, the mounting surface must be cleaned from the remnants of the previously applied tape. To separate the glued surfaces, it is necessary to cut the base of the adhesive tape (string, silk thread or fishing line).RECOMMENDATION FOR APPLICATION AUTOMOTIVE ADHESION PROMOTER:1. Helps ensure robust attachment of trim and injection-molded body side moldings 2. Notched packets open quickly and evenly for efficient use3. Dries in as little as 30 seconds4. For use on LSE plastics with 3M™ Acrylic Foam Tapes PACKAGE : 1 package contains 1 roll of double-sided tape PAYMENT : 1. We accepted ONLY PayPal payment. 2. Item will be shipped to your Paypal address , please make sure your Paypal address is CORRECT. SHIPMENT : 1. We will ship your order within 24-48 hours after receiving your verified payment (Excluding Weekends and Public Holidays) 2. All of our packages are sent by registered airmail with tracking. It usually takes about 14 to 28 days to arrive, depends on your location. In holiday seasons , it may take longer time ; if you do not receive the goods in 30 days please contact us. 4. All items are sent worldwide. RETURNS & REFUNDS : 1. We guarantee our products for 60 days . The defective item will be inspected and if found defective . If you received an incorrect, damaged, defective, or item not as described, contact us for a partial/full refund or replacement on our cost. FEEDBACK and CONTACT US : We hope to give you a positive ebay experience by working hard. Please contact us if you have any issues. If there is no response after contacting us several times, please check your email spam folder. Please DO NOT leave us neutral or negative feedback without contacting us first. We will do our best to help you resolve your problems .
Price: 15.95 USD
Location: Odessa
End Time: 2024-01-26T11:53:20.000Z
Shipping Cost: 9 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Warranty: Yes
Color: Black
Adhesion to Steel oz/in (N/100 mm): 24 (26)
Manufacturer Part Number: 1100
Thickness: 1.1 millimeter
Brand: 3M
Type: Double-Sided Foam Tape
Unit Type: Unit
Length: 5yd
Maximum Operating Temperature: 150°C
Features: High Strength, Instant installation of products, Cheaper assembly, Saving time and effort, Material savings, New features in design, Freedom to design, Double Sided
Country/Region of Manufacture: Germany
Backing Material: Acrylic Foam
Unit Quantity: 1
Adhesive Type: Automotive Acrylic Plus Tape
Available Variations
Color: 1/4" (6mm)
Price: 15.95 USD
Available Quantity: 5
Quantity Sold: 1
Color: 3/8" (9mm)
Price: 19.95 USD
Available Quantity: 3
Quantity Sold: 0
Color: 1/2" (12mm)
Price: 25.95 USD
Available Quantity: 8
Quantity Sold: 4
Color: 19/32" (15mm)
Price: 30.95 USD
Available Quantity: 2
Quantity Sold: 0
Color: 25/32" (20mm)
Price: 40.95 USD
Available Quantity: 2
Quantity Sold: 0
Color: 1" (25mm)
Price: 49.95 USD
Available Quantity: 2
Quantity Sold: 0
