Description: Item Detail: Model: TEC1-12706 Size: 40mm x 40mm x 3.8mm Voltage : 12V Umax (V) : 15V Imax (A) : 4.3-4.6A QMax (W) : 72W Power Cord : 300mm Net weight : 22g Color : White Used for: Numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Specification: Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU or even for your own custom car drink warmer/cooler. Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts These devices must be used in conjunction with a heat sink to avoid burned Each device is full inspected and tested Fitted with 6-inch insulated leads Installation: Cooling piece is very simple to install and use. Before installation, to find a dry cell, connected to the two leads of the cooler, at one end and the other end of fever, remember that the polarity of the lead and determine a good cooler cold and hot end. If you want to get a bigger system Ling, it is recommended that two cooling mode, with two stack up with the above, a grim absorption following a fever, the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support. How to Use: 1. Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power. 2. Coated with silicone grease on both sides of the thermoelectric cooler. 3. Place the thermoelectric cooler on a heat sink with a potholder in the middle. 4 Tighten the screws. Powered, and it starts cooling. Package included: 1 x TEC1-12706 Thermoelectric Cooler Note: heat side requires heat sink all the time. Note: We will reply your message or e-mail within 48 hours . Customers satisfaction is very important to us! Please email or eBay message us before leaving any Negative and Neutral feedback or open any dispute on paypal. Please give us the opportunity to resolve any problem.We understand the concernsand frustrations you might have, and will try our best to resolve the issues Shipping ： Item will be shipped out within 48 hours upon receipt of your full payment. Please make sure your address in paypal is correct. If you want to change the address, please give us ebay message right away you make the payment. Items are shipped from China or HongKong using Airmail, reach most of the countries within 10 to 20 business days. Delivery time depends on destination and other factors, it may takes up to 25 business days.Other countries or remote area may take longer. Please E-mail or eBay message us if the items did not deliveried within 31 days.And we can give you a satisfactory solution. However, it may delay due to industrial strike action, severe weather, custom reasons or peak seasons, such as Christmas/New Year Holidays. Returns： If this item is defective upon receipt, customer has up to 30 days from date of receipt for exchange of a new one.But buyers should be pay for the shipping charge for returning. We care about our valued customers, and are always willing to work things out. If you have any problems, please e-mail us immediately. Please give us the opportunity to resolve any problem. Thanks!
Price: 2.98 USD
Location: GD
End Time: 2024-10-05T07:09:01.000Z
Shipping Cost: 2.98 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
Type: Peltier Coolers TEC1-12706
Voltage Rating: 12V-15V
Maximum Cooling Capacity: 72W
Current Rating: 4.3-4.6A
MPN: Does Not Apply
Country/Region of Manufacture: China
Bundle Listing: No
Model:: Peltier Coolers TEC1-12706
Voltage :: 12V
Umax (V) :: 15V
Imax (A) :: 4.3-4.6A
QMax (W) :: 72W
Power Cord :: 300mm
Color :: White
Used for 1:: from CPU coolers to alternate power sources etc..
Used for 2:: for your own custom car drink warmer/cooler etc..
