9L Fluid Extractor Manual Oil Changer Vacuum Fluid Evacuator Pump Tank Remover

Description: Product DescriptionFeatures：Muti-size hose: change different sizes for different conditionEvacuates All Types Of Fluid Such As Engine Oil, Transmission Fluids, And Gear Oil CoolantsProbes can be stored in the holder when not in use.To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit.Sets up a permanent fluid transfer while you do something else.Avoids searching for drain plug keys and getting under the vehicle.Can also be used for draining fish tanks, basins and sinks.How To Use1) Warm up the oil by running the engine-This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. Note: If you can't hold the dipstick. comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit2) Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube.3) Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required.4) After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump and pour gently. Do not hold it upside down ! Bring the used oil to a recycling depot.SpecificationCapacity: 9ltrSuction Port: 32mmMain Material: ABS with Aluminium inflator.Package includes:1pc manual oil pump (with 5 tubes)1pc manual instructionMultiple Suction Probes make the extractor fits all cars.Suction Probes Diameter Ø4, Ø6, Ø8, Ø10 and 1pc of Ø4 brassProbe length 1MErgonomically designed Widened PedalsTo Make oil Evacuator pump stable.

Price: 61.03 USD

Location: Cannel City, Kentucky

End Time: 2023-10-23T11:01:20.000Z

Shipping Cost: N/A USD