Ademco 5802MN Miniature Supervised Transmitter

Description: The ADEMCO 5802MN is a wireless transmitter designed for use with compatible wireless alarm systems. Here are some key details about this device: 1. Purpose: The 5802MN serves as an emergency panic button. It can be worn on a belt (using the supplied belt holder) or around the neck (using the supplied necklace). When the button on the transmitter is pressed, it sends a signal to the control receiver. 2. Compatibility: It is intended for use only with wireless alarm systems that support 5800 Series devices. 3. Supervision: The 5802MN is a supervised transmitter. This means that every hour, it automatically sends a message to the control receiver, including battery status information. 4. Battery: It is powered by a long-life Lithium battery (3V). When the control unit indicates a low battery, the battery can be replaced. Note that although the 5802MN is water-resistant, it should not be submerged. 5. Programming: During system programming, you must “enroll” the transmitter’s unique identification code (serial number) and loop number. The 5802MN can be programmed as any zone type response (e.g., Emergency Panics, Relay Action, etc.) Programming The Serial Number: The 5802 has a unique identification code (serial number) permanently assigned during manufacture. The control system is required to “learn” the transmitter’s serial number during installation of the system. Note: During the “learning” procedure, two transmissions must be sent (by pressing the button). Allow at least 8-seconds between transmissions. All 5802 transmitters shall be programmed as “BR” type units (i.e., unsupervised “Button RF”). See the control unit’s Installation Instructions for further details regarding possible zone responses and programming. Specifications Unit Dimensions: 2-1/4” (57mm) x 1-1/2” (38mm) x 1/2” (12.7mm) LED: Lights when unit transmits.

Price: 25 USD

Location: Dunedin, Florida

End Time: 2024-12-09T20:26:20.000Z

Shipping Cost: 5.7 USD