Aftermarket Assassins RZR XP Turbo Oil Catch Can

Description: Aftermarket Assassins RZR XP Turbo Oil Catch Can.Version 1: This is your regular catch can for those running stock to 19 PSI of boost. Simply bolt the catch can in place, run your factory crank case vent to the can, and that's it. This includes the catch can, drain valve, air filter, mounting bolts, clamps, 1" hose cap for your intake tube.Version 2 was tragically scrapped.... Version 3: This is the same as version 2 with the addition of another pressure relief port on top of the valve cover. This includes a weld on 3/4" port off the top of your valve cover, 3/4" hose and clamps. This version provides the ultimate airflow and pressure relief for your motor to ensure the crank and rod bearings are getting oil under extreme boost conditions, and no horsepower is being robbed by having too much bottom end pressure. This version is great to have with ANY boost pressure, but is most necessary when running 23psi or higher. This includes the catch can with drain, air filter, mounting bolts, 1" cap, two 1" clamps, 3/4" aluminum port, 3/4" hose, two 3/4" clamps. The stock center bed cover plate will fit with this design. ***This version requires having a port welded into your valve cover. If you cannot do this, or cannot find a local shop to do the work, you can send us your valve cover or purchase a modified valve cover outright ***All welded construction & made in the USA!High flow 2" ID air filterHigh flow welded aluminum port(s) for maximum pressure relief3" aluminum body will hold a large volume of oilBaffled design with fuel foam to prevent oil from splashing out of the canEasy installation and mounts securely on the drivers side of the vehicle bolting through the bed. This can easily be mounted elsewhere if you have a bed delete or a custom setup.

Price: 175 USD

Location: Monticello, Georgia

End Time: 2025-01-05T03:58:40.000Z

Shipping Cost: 0 USD