AMT Electronics RD-2 Reincarnator

Description: 100% NEW 100%NEVER USED! WITH ITS ORIGINAL FACTORY PACKAGINGno POWER SUPPLY INCLUDED: IMPORTANT NOTE PLEASE READ: IT IS 100% NEW, IT HAS NEVER BEEN USED POWER SOURCE not INCLUDEDАМТ Reincarnator RD-2 (DI-box + ReAmp-box) AMT Electronics presets a new device – AMT RD-2 “Reincarnator”. It is a DI-box and a ReAmp-box in one device. Both functions can be used in Passive or Active modes. In the passive mode – you can use the device without a power supply. AMT RD-2 lets you record a “dry” sound of your guitar and use it later for reamping – to send the recorded signal to the input of your real loved amplifier. Some words about Reamping technology: Many sound recording studios use Reamping for getting desired sounding. The essence of reamping technology is a playback of pre-recorded “dry” guitar signal (the signal from the pickups) through a guitar amp and recording simultaneously with the microphone the guitar cabinet sound. With this technique, you can once record a guitar track and then, an unlimited number of times to playback and record it. In this case you can try to use different amplifiers, audio processing devices and microphone positions. Even with a live recording of a guitar cabinet with a microphone, you can later find out that you are not quite satisfied with the result, namely, satisfied with the quality of performance, but not satisfied with the quality of the guitar signal processing. When recording “live sounding” guitar cabinet, you can at the same time record a “dry” guitar sound, then, afterwards, using reamping you can achieve the desired result. The main DI-box function is basically the matching of a high guitar pickups’ impedance and a relatively low input impedance of the recording device. In addition, a DI-box makes a transformation of an unbalanced guitar signal into a balanced mic-level signal for sending to the input of the DAW (sound card). Guitar pickups have sufficiently high impedance, something like 10-15kOhm, so if the signal is put directly to the low-impedance input of the DAW (sound card), there will be a significant change in the signal. In addition, unbalanced guitar cables are susceptible to crosstalk and at a great length; it is desirable to move from an unbalanced line to a symmetric (balanced) one. The main Reamp-box functions are the transformation of a symmetric (balanced) line-level signal from the output of the DAW (sound card) into the unbalanced signal being sent to the guitar amp input and a matching of the DAW (sound card) low output impedance and high-impedance guitar amplifier input. Specification: 1. Weight netto 400 g 2. Dimensions (Case only) W 84mm H 42mm L94mm 3. Power Requirement (active mode): 15mA, 9…18VDC PAYMENT: PAYPAL ONLY Payment Paypal Payment must be received within 3 days of auction close OR immediate payment when buyer uses Buy It Now SHIPPING: USPS WITHIN 5 BUSINESS DAYS OF PAYMENT ONLY WITHIN THE U.S ONLY TO PAYPAL CONFIRMED ADDRESS NO WARRANTY NO RETURNS OR EXCHANGES MT Electronics engineers present a new device in the AMT Bricks series – the AMT PANGAEA VIRGIN CAB VC16. It is an IR cabinet simulator for individual practice, Live gigs, and recording. The device has a universal interface of the AMT Bricks series of the devices, which lets you combine the devices of this series in the easily controllable complex. The input attenuator lets you use the device not only with line-level signals but with power amps output signals. The device main outputs can be used either in balanced or unbalanced modes.Needless to say, the electric guitar tone is defined by many components, such as a guitar itself, an amp, a cabinet with speakers and a mic. The new AMT Electronics PANGAEA VIRGIN CAB VC16 can emulate the sound of any miked guitar cab, whose Impulse Responses (IRs) are free or commercially available on the Internet and can be easily loaded to the Pangaea via USB.IMPORTANT NOTES!A tube guitar amp MUST be loaded on a cabinet w/ speakers or loadbox. There is no internal load in the Pangaea VirginCab VC16 Connecting the VirginCab VC16 to a computer does not require any additional software: the device is recognized by a computer as the USB flash drive. Loaded IRs can be tweaked by adjusting their VOLUME level, EQ and early reflections amount (FX ROOM). Features:Impulse Response (IR) based guitar speaker cabinet modelingLoad up to 16 IRs (4 banks with 4 presets each)GT (Noise Gate)CM (Compressor)PR (Preamplifier) is a flat-EQ preamp model (clean channel), that allows connecting a regular overdrive/distortion pedal directly to the VC16 (rather than using an external preamp)PA (Power Amplifier) module emulates the sound of one of 9 (nine) tube guitar power amplifiers:PP 6L6: Typical Push-Pull Power Amplifier w/ 6L6 TubesPP EL34: Typical Push-Pull Power Amplifier w/ EL34 TubesSE 6L6: Typical Single-Ended Power Amplifier w/ 6L6 TubesSE EL34: Typical Single-Ended Power Amplifier w/ EL34 TubesAMT TC-3: Based on AMT Electronics TubeCake TC-3California: Modeled after Mesa/Boogie® Dual Rectifier®British M: Modeled after Marshall® JCM800®British L: Modeled after Laney® LC50-112 IIDefault (Linear Frequency Response)5-Band Parametric EQLow-pass & High-pass filtersEarly Reflections modeling (FX ROOM)Ultra-compact metal housing Tech SpecsInputs/Outputs: Preamp/Amp INPUT, AUX IN (for a portable media player), OUTPUT (to an audio interface, mixing desk, PA system or headphones), HEADPHONES, USB (for connecting to a computer), CTRL IN/OUTImpulse Response file type: WAV 24 bit 48 kHzLatency: 1.2 ms / 0.0012 sPower requirements: 12 Volts DC @ 100 mA / 0.1 A, tip/center negative (power supply is not included!)Dimensions: 47mm x 55mm x 95mmWeight: 190 g

Price: 149.99 USD

Location: Key Biscayne, Florida

End Time: 2024-11-23T22:40:35.000Z

Shipping Cost: 10.99 USD