Arca foot for Sony FE 200-600mm f/5.6-6.3 G OSS. Kirk Markins RRS Benro Acratech

Description: Part Number # Arca foot for Sony FE 200-600mm f/5.6-6.3 G OSS with lens lens supportProduct Description: New Hejnar Photo Quick Release Arca Swiss type foot replacement with QD ( Quick Detach ) socket for Sony FE 200-600mm f/5.6-6.3 G OSS Lens ( Lens not Included) with optional lens supporting bracket.It is the best quick release system for tripods when combined with Arca style ball head and clamps. This foot is designed to work with various ARCA TYPE quick release clamps. This foot have enough room for your fingers under the lens to freely use lens focusing ring. Lens Foot incorporate Quick Detach socket to attached a standard push-button QD mount. Use the QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. Attach your favorite strap to the clamp, then mount the clamp to any of Arca Type plates , L brackets or Foot Replacements. Straps are available at eBay, Amazon, Cabala's, Bass Pro and other stores with sporting fishing and military equipment. My favorite strap Black Rapid and Magpul MS4® Dual QD Sling GEN2Optional DCLS-1 quick release lens support add on ( included )set for lens foot is design to be used in conjunction with arca type lens foot mounted to lens. By using the DCLS-1 lens support the lens movement are reduced when loosening the lens collar to rotate the lens and stabilizes the front of the lens. Bracket can be mounted on either side of lens foot if foot ie equipped with dual side mounting option. If you are mounting it from bottom side you need to remove stop screw from lens foot. Roller bearing bracket position can be adjusted up to 1.4 inch from lens foot Compatible with:Markins including level release clampReally Right Stuff, including level release plate.Arca SwissWimberleyKirkPhoto ClamFoba Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series)Custom BracketsJobu DesignsAcratechOther Arca swiss type products Foot Specification:Length 5.50 inch.1.30 inch height. Weight 4.2 oz (119g)1/4-20 taped holes.Quick Detach Socket Double-dovetail design allows for dual clamping surfaces on railPrecision C.N.C. machined from 6061-T6 AluminumStainless steel hardware.Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)Made in USABlack hard coat anodized surface.Installation InstructionSlide the SFR003 lens foot onto the lens and attach it to a lens using the enclosed 1/4-20 screw. Drive the screw in until you first meet resistance, then turn it about 30° farther to establish appropriate, but not excessive, torque. Do not over tighten. Tighten the side set screw, then turn it about 30° farther to establish appropriate, but not excessive torque. Bracket Specifications: Total length with bearing support bracket 4.95 in. Length without supporting bracket 4.38 in 3.00 inches wide including knobsWeight: 142gCan be used with various lensesMade from 6061-T6 AluminumMade in USAStainless steel hardwareBlack hard coat anodized surfaceAuction Includes: One replacement foot with mounting screwSupporting Bracket Set DCLS-1Hex key for all included screwsShipping Information:Free Shipping with USPS First Class Mail. Tracking information provided. USA Costumers please note that USPS packages may travel much longer than the estimated delivery time and tracking information is not always updated daily. If your order is time sensitive, you need daily tracking update please use FedEx, UPS or Express Mail as delivery service during checkout.

Price: 175 USD

Location: Bloomingdale, Illinois

End Time: 2023-12-19T16:35:54.000Z

Shipping Cost: 0 USD