Belleville 675ST Flight Boots Gore-Tex Air Sage Mens US11 EE NWT Sold Out HTF

Description: Belleville 675ST Insulated WPR Flight Boots Gore-Tex Air Sage Green US Mens 11W Sold Out & HTF Heavily insulated with 600G of Thinsulate™ insulation, this all full-grain leather boot also offers ultimate waterproof protection and superior slip resistance in icy conditions through the use of the Vibram® FIRE & ICE™ outsole made of a special rubber compound that will not harden in cold temperatures. Made in USA - Berry Compliant FootbedPolyurethane OutsoleVIBRAM 360 Fire & Ice GORE-TEX Waterproof lining Insulation600g THINSULATE™ 8"H (Standard Military Height) Tie - Steel Toe Sizing Information This information is directly from Belleville. Unfortunately, not all boot brands fit the same. For this reason, we would like to offer a few sizing tips that will help you get a better BELLEVILLE fit: CHECK YOUR SIZE:Belleville boots are about 1 to 1½ full sizes larger in fit than your normal shoe size when measuring on a standard Brannock shoe device. The difference depends on the type of boot you choose: soft toe versus safety toe, hot weather versus insulated or waterproof, etc. SIZING RECOMMENDATIONS FOR THE MINI-MiL (TR101, TR102, TR103) MINIMALIST BOOTS:Due to the wider shape of the toe box, we have found that the MINI-MiL® tends to run on the small/short side. For this reason, we recommend customers order a half size up from your normal shoe size. For instance, if you wear a size 10, then we would recommend you order a 10.5 in the MINI-MiL®. GET SOME BOOT SOCKS:Try on the boots with a pair of boot socks that you will normally wear with the boots. PLACE & LACE:It is important that your foot is properly placed inside the boots when selecting a size. Proper foot placement requires that the lace is drawn snug at the bottom of the lacing system. This will prevent your foot from sliding forward too far and keep your heel properly placed against the back of the boot. To improve the fit of the boot, try loosening or tightening the laces at different parts of the boot until you get the perfect fit. CHECK THE LENGTH:Length-wise, when your heel is placed against the back of the boot, you should have a slight amount of room in the front of the boots to wiggle your toes. CHECK THE WIDTH:Width-wise, your boots should feel a little snug, but not tight. TAKE A STROLL:Walk around to see how the boots feel. Make sure your heel stays in place and not sliding up and down (this can cause blisters).

Price: 185 USD

Location: Glendale, California

End Time: 2024-02-29T18:46:56.000Z

Shipping Cost: N/A USD