Benro TSL08AN00 Slim Aluminum-Alloy Tripod w/Ball Head

Description: Benro TSL08AN00 Slim Aluminum-Alloy Tripod w/Ball Head Benro TSL08AN00 Slim Aluminum-Alloy Tripod with Ball Head Key Features Slim-Profile Tripod Folded Width: 3.2", Folded Length: 20.1" Load Capacity: 8.8 lb Max Height: 57.6", Min Height: 15.7" Leg Sections: 4, Weight: 2.6 lb Reversible, Rapid Column Aluminum-Alloy Legs, Rubber Feet 1/2-Turn Twist Locks, Bubble Level Magnesium-Alloy Ball Head, 90° Tilt 360° Pan, Arca-Type Compatible Clamp This TSL08AN00 Slim Aluminum-Alloy Tripod from Benro supports up to 8.8 lb and includes an Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, the tripod measures 20.1" long and 3.2" wide when folded. Its 4-section legs each feature an independent spread, a 3-position angle lock, half-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 15.7" to a maximum height of 48.4" or 57.6" with its push-and-pull, rapid center column fully raised. Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate. The quick release plate can be attached or removed from the integrated, Arca-type clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. While the top of the quick release plate features a rubberized, non-slip platform, dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Additionally, the primary locking knob controls the ability to pan the head 360°. For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. A nylon, drawstring bag is provided for storage and transport. Use and Handling Supports up to 8.8 lb Push-and-pull center column with ballast hook for rapid camera, lens, or sport optic positioning Can be set for a minimum height of 15.7" to a maximum height of 48.4", or 57.6" with center column fully raised Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them Legs each feature 4 sections, a 3-position angle lock, half-turn twist locks for rapid deployment, and can be independently spread Legs can be locked at 21°, 55°, or 80° angles Rubber feet help to enhance stability on a wide variety of surfaces Built-in bubble level Weighs 2.6 lb, measures 20.1" long and 3.2" wide when folded Hex key to adjust tension on leg hinges Construction Details Aluminum-alloy legs Magnesium-alloy ball head with Arca-type quick release clamp Aluminum-alloy quick release plate with 1/4"-20 mount; rubberized, anti-slip surface; and dual retaining screws that prevent the base plate from accidentally sliding off when the clamp it is placed on is opened Drawstring bag for storage and transport Benro TSL08AN00 Slim Aluminum-Alloy Tripod w/Ball Head Benro TSL08AN00 Slim Aluminum-Alloy Tripod with Ball Head Key Features Slim-Profile Tripod Folded Width: 3.2", Folded Length: 20.1" Load Capacity: 8.8 lb Max Height: 57.6", Min Height: 15.7" Leg Sections: 4, Weight: 2.6 lb Reversible, Rapid Column Aluminum-Alloy Legs, Rubber Feet 1/2-Turn Twist Locks, Bubble Level Magnesium-Alloy Ball Head, 90° Tilt 360° Pan, Arca-Type Compatible Clamp This TSL08AN00 Slim Aluminum-Alloy Tripod from Benro supports up to 8.8 lb and includes an Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, the tripod measures 20.1" long and 3.2" wide when folded. Its 4-section legs each feature an independent spread, a 3-position angle lock, half-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 15.7" to a maximum height of 48.4" or 57.6" with its push-and-pull, rapid center column fully raised. Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate. The quick release plate can be attached or removed from the integrated, Arca-type clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. While the top of the quick release plate features a rubberized, non-slip platform, dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Additionally, the primary locking knob controls the ability to pan the head 360°. For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. A nylon, drawstring bag is provided for storage and transport. Use and Handling Supports up to 8.8 lb Push-and-pull center column with ballast hook for rapid camera, lens, or sport optic positioning Can be set for a minimum height of 15.7" to a maximum height of 48.4", or 57.6" with center column fully raised Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them Legs each feature 4 sections, a 3-position angle lock, half-turn twist locks for rapid deployment, and can be independently spread Legs can be locked at 21°, 55°, or 80° angles Rubber feet help to enhance stability on a wide variety of surfaces Built-in bubble level Weighs 2.6 lb, measures 20.1" long and 3.2" wide when folded Hex key to adjust tension on leg hinges Construction Details Aluminum-alloy legs Magnesium-alloy ball head with Arca-type quick release clamp Aluminum-alloy quick release plate with 1/4"-20 mount; rubberized, anti-slip surface; and dual retaining screws that prevent the base plate from accidentally sliding off when the clamp it is placed on is opened Drawstring bag for storage and transport × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info FREE Shipping Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Tamron 2870/22986 28-70mm f/3.5-4.5 Adaptall Mounrt, Used (For Parts) Canon RF1535/2.8L/00678 RF 15-35mm f/2.8L IS USM, Used Rokinon DSX14T3.1/13963 14mm T3.1 DSX High-Speed Cine Lens (RF Mount), Used IDX 98/E0027 Endura Duo 98 Battery, Used Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © AVC Photo Store & School Shipping & Payments Shipping is FREE for this item Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 84.95 USD

Location: Miami, Florida

End Time: 2024-11-23T21:09:33.000Z

Shipping Cost: N/A USD