Biscuit - Programmable WiFi 9-Axis Absolute Orientation Sensor

Description: Biscuit - Programmable WiFi 9-Axis Absolute Orientation Sensor The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor includes Accelerometer, Gyroscope and Geomagnetic sensor. The Biscuit™ provides 3-axis absolute orientation in the format of Quaternion, Euler Angle or Rotation Vector as well as Linear Acceleration, Gravity, Heading and Temperature. The WiFi module has an inherent micro controller unit (MCU) on which users can download their own programs developed on separate development environment (IDE). The Biscuit™ can be operated using USB bus power or battery to be used as an independent device untethered to a host. KEY FEATURES3-Axis Gyroscope3-Axis Accelerometer3-Axis Geomagnetic Sensor3-Axis Orientation: Quaternion, Euler Angle, Rotation VectorLinear AccelerationGravityHeadingTemperatureSPECIFICATIONSPerformanceAccelerometer Ranges: ±2/4/8/16g (selectable)Accelerometer Resolution: 14-bitGyroscope Ranges: ±125°/s, 250°/s, 500°/s, 1000°/s, 2000°/s (selectable)Gyroscope Resolution: 16-bitGeomagnetic Sensor Ranges: ±1300µT (x, y axis), ±2500µT (z axis)Geomagnetic Sensor Resolution: 13 / 13 / 15 bits for x / y / z axesWiFiProtocol: 802.11 b/g/nFrequency: 2.4GHzMCUCPU: 32-bit, 80MHzFlash Memory: 2MBIDEArduino IDESize25 x 48 mm (PCB)PowerUSB Bus or Battery OperatedConsumption: 75mA (sensors and WiFi turned off)Input Voltage: 3.7 - 5.0VDCNOTESWARNING: Incorrect battery connection can damage the PCB. If the battery has different outputs than the one shown in the picture above, please use the supplied cable to change the polarity. Compatible battery connector is Molex 51021-0200This product was developed & manufactured by WITHROBOT Co., LTDBoard schematics and firmware source code will not be released to the public. The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and WiFi communication module. The 3 dimensional motion sensor includes Accelerometer, Gyroscope and Geomagnetic sensor. The Biscuit™ provides 3-axis absolute orientation in the format of Quaternion, Euler Angle or Rotation Vector as well as Linear Acceleration, Gravity, Heading and Temperature. The WiFi module has an inherent micro controller unit (MCU) on which users can download their own programs developed on separate development environment (IDE). The Biscuit™ can be operated using USB bus power or battery to be uséd as an independent device untethered to a host. KEY FEATURES3-Axis Gyroscope3-Axis Accelerometer3-Axis Geomagnetic Sensor3-Axis Orientation: Quaternion, Euler Angle, Rotation VectorLinear AccelerationGravityHeadingTemperature SPECIFICATIONS Performance Accelerometer Ranges: ±2/4/8/16g (selectable)Accelerometer Resolution: 14-bitGyroscope Ranges: ±125°/s, 250°/s, 500°/s, 1000°/s, 2000°/s (selectable)Gyroscope Resolution: 16-bitGeomagnetic Sensor Ranges: ±1300µT (x, y axis), ±2500µT (z axis)Geomagnetic Sensor Resolution: 13 / 13 / 15 bits for x / y / z axesWiFi Protocol: 802.11 b/g/nFrequency: 2.4GHzMCU CPU: 32-bit, 80MHzFlash Memory: 2MBIDE Arduino IDESize 25 x 48 mm (PCB)Power USB Bus or Battery OperatedConsumption: 75mA (sensors and WiFi turned off)Input Voltage: 3.7 - 5.0VDC NOTESWARNING: Incorrect battery connection can damage the PCB. If the battery has different outputs than the one shown in the picture above, please use the supplied cable to change the polarity. Compatible battery connector is Molex 51021-0200 This product was developed & manufactured by WITHROBOT Co., LTDBoard schematics and firmware source code will not be released to the public. eBay integration by

Price: 40.95 USD

Location: Ukiah, California

End Time: 2024-11-20T13:03:37.000Z

Shipping Cost: 8.95 USD