Briggs & Stratton Vanguard Cylinder Assembly 692543

Description: Source: Briggs & Stratton Model: 303777-1165-E1 Date Code: 00110911 Part Number: 692543 – Cylinder Assembly, Note: Used After Code Date 97043000 This is a used Briggs & Stratton Vanguard Cylinder Assembly. Source from a John Deere garden tractor. Clean. Lightly refurbished with high temperature paint. The gasket surfaces are clean and smooth. The threads are in good condition. Does not include gaskets. The cylinders have been lightly honed to ensure structural integrity. Bores are within spec. The original bearing still installed as it is in very good condition. May show signs of normal wear. All Items are prepacked and ready for immediate shipment. Most items ship within one hour of purchase. PJ’S Small Engine Parts will guarantee same-day shipment, in the mail, if purchased before 11:00 a.m. CST. PLEASE DO NOT BUY THE WRONG PART!!! If in doubt send your model number and date code/serial number before purchase. It is free. Your nomenclature information is important to verify if this is the correct part for your application. What to make it simple? Send an attached picture of your model number, date code, serial number, or spec number, depending on your application. If I do not have the part you need, I will provide you with the correct part number for your application. I do not sell parts by measurements unless it is for a Custom Build Buyer (CBB). CBB-See Below Definitions: Apparatus Nomenclature: Technical equipment or machinery needed for a particular activity or purpose. In short, the model and serial number are located on the frame of the machine. Engine Nomenclature: The letters and numbers that make up an engine's model number are a series of codes to tell you the engine family, the number of cylinders, the emissions standard, the type of ignition, the capacity, the type of aspiration and the generator set rating. See below for location of common engine nomenclature. CUSTOM BUILD BUYERS (CBB) – CBB are professionals in their field of expertise and purchase parts to operate outside the normal limits or directed use of the parts’ intended use. CBB, message me with what you are trying to do and the specs you require for your project. Please contact me directly with the required specs you need for your application. If I do not have the part, I will try to point you in the right direction. CCB, includes but limited to: mini-bike builders, lawn tractor pullers/racers, lathe & mill machinist, go-carts builders…etc. I will never ship a dirty or grease covered item. I ensure that the item is functional and clean. Rest assured that when you open the box you will NOT have to put on gloves or break out the cleaner just to handle the part before installation. All items are considered used and may have signs of normal wear, unless otherwise described. SHIPPING NOTE: Most items shipped using USPS. Unfortunately, USPS has been experiencing delays beyond my control. On rare occasions your item may be delayed. To keep shipping costs low, I will continue to use USPS to ship most of my items. Other large and heavy items are shipped using UPS. The method of shipment will be indicated in the listing. Alternate shipping methods are not allowed unless offered in the listing. ITEM FITMENT: It is the responsibility of the Buyer to ensure that every item fits their application before purchase. If you do not know if the item will fit your application, I encourage every potential Buyer to send me the nomenclature, (engine make/model/ serial number, date code) to verify fitment before purchase. I will provide the Buyer with the correct part number, even if it is not something I have in stock. Please do not waste time and money purchasing the incorrect part for your application. A model number tag located under the seat, on the deck is not the engine nomenclature, rather it is the equipment nomenclature. MODEL NUMBER LOCATION BY BRAND: Briggs & Stratton Engine Location: On the Engine or stamped on valve cover or stamped on blower housing Model numbers are located on the physical engine and usually contain a combination of letters and numbers. The numbering system is often segmented into 3 sections: [Model Number] - [Engine Type Number] - [Code Number] Your model number will be either 6, 7, 11 or 12 characters in length. Kohler Engine Location: The model number, serial number, and specification code on a Kohler engine are located on a silver decal attached to the blower housing on the side of the engine cover. MODEL NO. - SPEC. NO. - SERIAL NO. - BUILD DATE Tecumseh Engine There are several places on the engine this may be found. Typically, the Tecumseh engine model label is located on the front or top of the engine. ENGINE: ENGINE MODEL – SPEC NO. – D.O.M. TRANSAXLE Hydro-Gear Transaxle Hydro-Gear products can be identified by the label attached to the product depicting the model and serial number. MODEL NO. – SERIAL NO. – CROSS REFERENCE NO. Peerless/Tecumseh Transaxle The identification should be visible by viewing the case/cover unit from below and behind as it is mounted in the driven equipment. MODEL NO. – SPEC NO. – D.O.M. – SERIAL. *Product ratings are usually for different sellers. They are Ebay-bot assigned and are not a product rating for this specific item. Ebay product ratings are misleading. For an accurate product rating for this item look for the “Sold By:” indicator in the Product Rating section. If it does not have “Sold By: PJ’S Small Engine Parts” then it is another seller’s product rating and not a direct reflection of this specific item.

Price: 279.99 USD

Location: Poyen, Arkansas

End Time: 2024-12-31T16:52:38.000Z

Shipping Cost: 0 USD