Description: Specification: 100% Brand New & High Quality. Operating voltage: DC 12V-36V Operating Current: <=15A Driver Power: <=500W Speed Voltage: 0.1V-5V Operating Temperature:-40-85°C Humidity: 90%RH Stall protection:Yes Enable Control: Yes Over-current protection: Yes Steering control: Yes Speed control signal: Yes Size: 63×42×17mm(L×W×H); Probe size 3mm, length: fixing hole center distance 57mm; width:fixed hole center distance 36.5mm Wiring: Control terminal for SET: 1. The motor speed control wiring methods: available potentiometer system speed can also be connected to the MCU control, when the potentiometer control wiring, the potentiometer middle pin is connected to VR speed port, potentiometer connected to both ends of 5V and GND terminal voltage more high speed faster. 2. Motor steering control wiring methods: you can switch control can also be connected to the MCU control, to GND in direction, then in direction 5V. Note: Due to different motor manufacturers to make the hall of hall line order does not necessarily the line on the board to match the sequence, need to be adjusted. Motor driver board 12-36V DC power input, VCC positive power supply,GND power supply is negative. Tips: If you use less than 60W, without additional heat sink , be sure to add more than 60W heatsink fins drive efficiency without lowering the temperature is too high will shine into permanent damage! We recommend cooling surface area greater than 200 square centimeters! Proposes to add insulation films, both sides of the insulating sheet plus thermal grease! Package Includes: 1 × 12-36V 500W Brushless Motor Controller Driver Controller Car-[High Quality] The brushless motor controller is made of high quality electronic components for long service life,you can use it for long time with confidence Driver Board Motor-[Good Performance] This driver board has many advantages including low consumption, high reliability and efficiency. Board 36V 500W-[Feature] This brushless motor controller can withstand the temperature of -40 to 85°C/-40 to 185℉, easy to use. Balanced Car Driver-[Functions] This board has many functions such as stall , enable control, over-current , steering control and speed control . Car Driver Board-[Application] The motor controller is suitable for brushless DC motor.
Price: 12.55 USD
Location: Tecumseh, Nebraska
End Time: 2024-12-29T09:08:48.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Package Dimensions LxWxH: 5.12x3.54x0.79 Inches
Weight: 0.08 Pounds
Type: Does not apply
Brand: AUNMAS
