Description: CONTACTEBAY STORE bikesportadventureMariposa EffectEffetto Mariposa Caffelatex Tubeless Strip M 26/27.5" 25-29mm Tubeless Conversion Tape for 2 Wheels ClothingFootwearEquipmentTechnologyIntegrationAutomotiveOtherINFORMATION Caffélatex Tubeless Strip is a very light, puncture-proof, transparent tubeless rim tape that makes tubeless conversions quick and easy. Strip allows tubeless conversion of most standard bicycle wheels, using Tubeless or Tubeless-Ready tires and Caffélatex or Végétalex sealant. STRENGTHS:The easiest way to do a tubeless conversionVery light tubeless nipple tapeDamage ResistantLong lasting, can be moved from one wheel to anotherWide range of widths CHARACTERISTICS:Tubeless conversion, made easyCaffélatex Strip is the ultimate solution for tubeless conversion of very difficult rims (for example, aluminum rims with a matt surface finish, rims with a very deep channel, pinned rims with a non-welded joint, etc.). This is because Strip is not adhesive: it is made in a single piece and relies on its own elasticity to adhere to the rim. Important: Sorry, Strip does not work on asymmetric rims with off-center valve holes. To convert a rim to tubeless, simply remove the original rim tape, choose the appropriate Strip size and follow these simple steps: (OPTIONAL STEP) Use a roll of electrical tape and seal the spoke holes of the rim. This is just to create additional protection to prevent sealant from entering the inner chamber of the rim, in the unlikely event that the Strip moves and lets some liquid through.Insert the supplied Caffélatex Tubeless Valve into the hole in the Strip, so that the rubber base of the valve is in contact with the Strip.Attach the Strip to the rim, tightening the ring onto the valve stem. It is important to push the base of the valve against the rim as you screw it on, to achieve a proper air seal.Keeping the wheel with the valve facing up, at 12 o'clock, finish fitting the Strip onto the rim.Using a screwdriver or similar tool, center the Strip inside the rim channel.Add tubeless tire, Caffélatex or Végétalex sealant, inflate and… pedal.Further details in the technical video at the bottom of the page. The weights (*) for a single Strip are:Strip M 26 "/ 27.5": 36 g(*) Tolerance +/- 10% on nominal weight Highly resistant to damage and puncturesThe special polymer used in its construction makes the Strip highly resistant to damage and punctures. It is also very chemically stable and cannot be damaged by Caffélatex or other non-chemically aggressive tire sealants. ? WARNING: Using sealants containing aggressive chemicals or ammonia, or cleaning the rim with aggressive chemicals may damage Caffélatex Tubeless Strip and may pose a danger to the user. We recommend using only Caffélatex or Végétalex sealant, or inflate and repair Espresso and Espresso Doppio with Caffélatex Tubeless Strip. Long lastingSomething you can do with Strip that is simply not possible with tubeless tape: move Strip from one rim to another. Because the Strip material is very durable, its lifespan can outlast that of the rim it is mounted on and it can be removed and mounted on another rim. Strip can also be removed and reassembled on the same rim, in case you need to replace a spoke. Strip is sold as a kit containing two Strips and two black 40 mm Caffélatex Tubeless Valves (for rims up to 37 profile), 2 wheels per kit.The maximum pressure for the Strip is 7 bar (100 psi), making it also suitable for wider road tyres (starting from 28 mm wide). Frequently Asked Questions Why introduce Strip when you already have tubeless conversion tape? For most applications, adhesive tubeless tape is great and will always be lighter than tubeless rim tape. A layer of our Caffélatex Tubeless Tape weighs less than 10g per wheel, while Strip starts at 30g (but note that a butyl tubeless rim tape weighs over 60g). However, tape does require time and some skill to install properly: Strip can be fitted in a couple of minutes and will work perfectly even on deep rims or those with a low-tack finish. Unlike adhesive tapes that remain inside the rim channel, the Strip goes up the inside walls of the rim and in some cases can be seen from the outside, when the tire is mounted. Why? The idea is to create an air seal between the tire and Strip. This is especially useful for pin-jointed rims: in those, the joint is not welded and sealing the spoke holes in the rim channel is not enough as sealant/air can leak through the sides of the rim, at the joint. Strip was born to be the “no-hassle” tubeless converter! Strip is puncture proof. Why? Being cut/puncture resistant, Strip is immune to damage caused by tire levers, common with butyl rim tape or taped rims. Puncture resistance becomes more relevant when using Strip on rims with through holes, such as those on Fat bikes. My rim has a Schrader valve hole (8.5mm diameter). Should I use a valve adapter? The Strip will easily convert any Schrader drilled rim without the need for any adapters (just use the supplied tubeless valve and insert it into the Strip before mounting it to the rim, as described above). Made in Italy. Characteristics:Diameter: 27.5" Code: EMRSP22 DELIVERYPAYMENT Payment can be made via Paypal or credit card through the most important circuits.DELIVERY TIMESMADE Returns are authorized within 30 days of purchase, the cost is at your expense. We will assess that the product is not damaged, after which we will refund the full amount using the same payment method used for the purchase. POWERED BY BSA LAB COPYRIGHT © 2024 BSA LAB SRL - ALL RIGHTS RESERVED P.IVA 05579910877Caffélatex Tubeless Strip is a very light, puncture-proof, transparent tubeless rim tape that makes tubeless conversions quick and easy. Strip allows tubeless conversion of most standard bicycle wheels, using Tubeless or Tubeless-Ready tires and Caffélatex or Végétalex sealant.STRENGTHS:The easiest way to do a tubeless conversionVery light tubeless nipple tapeDamage ResistantLong lasting, can be moved from one wheel to anotherWide range of widthsCHARACTERISTICS:Tubeless conversion, made easyCaffélatex Strip is the ultimate solution for tubeless conversion of very difficult rims (for example, aluminum rims with a matt surface finish, rims with a very deep channel, pinned rims with a non-welded joint, etc.). This is because Strip is not adhesive: it is made in a single piece and relies on it
Price: 33.2 USD
Location: 95031
End Time: 2024-12-30T11:14:14.000Z
Shipping Cost: 28.21 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Effetto Mariposa
MPN: EMCHCSPM26
EAN: 7640164680576
Part Type: Does not apply