Canon EOS C80 Cinema Camera #6389C002

Description: Canon EOS C80 Cinema CameraSKU: CAC80Mfr. Part: 6389C002 Item IncludesCanon EOS C80 Cinema Camera - Handle Unit - BP-A30N Battery Pack - CA-CP300 B Compact Power Adapter - CG-A20 Battery Charger - Microphone Holder - SS-1200 Shoulder Strap - User Manual - Canon 1 Year Limited Warranty DescriptionThe EOS C80 camera is designed for limitless creative vision. The compact, full-featured camera body includes Canon's 6K full frame Back-Illuminated Stacked CMOS sensor, Cinema RAW Light and 4K/120p internal recording, Canon's next-generation Dual Pixel CMOS AF II and a 12G-SDI interface. The EOS C80 seamlessly integrates into almost any production providing the ultimate flexibility and outstanding image quality. 6K Full Frame Back-illuminated Stacked CMOS Sensor The EOS C80 features a 6K back-illuminated stacked full-frame CMOS sensor. The sensor offers exceptional low noise, enabling the camera to excel in a wide variety of lighting situations and maximizing the camera's full dynamic range. The new sensor delivers faster read-out speeds than previous EOS sensors and when compared to a front-illuminated CMOS sensor, the new sensor's architecture provides improved sensitivity as it increases light capturing efficiency and improves 4K image quality with 6K oversampling. Triple Base ISO (800, 3200 and 12,800) Our newly developed, full frame 6K back-illuminated stacked sensor offers triple-base ISO, which allows the EOS C80 to deliver stunning imagery in a wide range of lighting conditions. With base ISOs of 800, 3200, and 12,800, you will be able to maximize the full dynamic range of the sensor in brilliantly lit or low-light shooting conditions. Internal Recording: 6K 30P Cinema RAW Light, XF-AVC, XF-HEVC S and XF-AVC S The EOS C80 can record up to 6K 30P in Cinema RAW Light. Other recording options include our standard XF-AVC codec which can record in 10-bit 4:2:2 with oversampling from the 6K sensor, creating rich detail and smooth imagery, at frame rates up to 120P, without the need for cropping the image from the sensor. For slow or fast motion recording, the C80 can support up to 4K 120P and 2K 180. Two additional recording codecs are now available: XF-AVC S and XF-HEVC S. These formats feature an easy-to-manage naming system and folder structure, while recording in the familiar MP4 format and preserving metadata. High-frame Rate Recording With Auto Focus and Subject Detection When recording in slow and fast motion (Slow & Fast, 4:2:2 10-bit), the EOS C80 enables Dual Pixel AF II for frame rates of 100 and 120fps and Subject Detection for frame rates between 72-120fps. Dual SD Card Slots The EOS C80 features two SD Card slots supporting simultaneous recording and a variety of recording modes, such as simultaneous recording for backup or proxy files for editing, simultaneous recording of different formats and resolutions, and relay recording, which is critical for lengthy video shoots. The slots are compatible with SD UHS-II, V90-class cards. Dual Pixel CMOS AF II The EOS C80 supports the next generation of Canon's acclaimed Dual Pixel CMOS Autofocus, Dual Pixel CMOS AF II. The camera's back-illuminated stacked sensor provides better light-capturing efficiency, widening the area of the sensor that can be used for AF. EOS iTR AF X (People Detection) With outstanding speed, precision, and a wide autofocus range, Dual Pixel CMOS AF II uses the EOSIntelligent Tracking and Recognition (iTR AF X) algorithm, developed with deeplearning technology, to enable high-performance detection of human beings. In addition to human eyes, face, and head, the camera can detect a human body and follow it with high accuracy. EOS iTR AF X (Animal Detection) iTR AF X Animal Detection detects the eyes, face, or the entire body of an animal to enable highly accurate focusing and tracking not affected by subject size or face orientation. 12G-SDI and a Variety of Interfaces The EOS C80 has diverse set of interfaces making it a versatile camera for variety of productions. The EOS C80 distinguishes itself from its predecessor with built-in SDI (1x 12-G/3-G SDI OUT, BNC terminals), which enable uncompressed video signal transfer with a secure cable connection. Other interfaces include: two three-pin mini-XLR audio inputs (INPUT 1 and INPUT 2), a Microphone terminal (3.5mm stereo mini-jack), and REMOTE terminal (2.5mm stereo mini-mini), a full-size HDMI interface (HDMI OUT, Type A Terminal). Ethernet, and Wi-Fi Control The built-in Ethernet port and Wi-Fi enable Canon's IP-based remote control XC Protocol. XC Protocol maximizes operability and remote control of camera settings. Using the XC Protocol, the camera can be operated by Canon's RC-IP1000 and RC-IP100 controllers (sold separately), and XC Protocol-enabled third-party remote control panels (RCP) can remotely shade the camera. Additionally, Canon's Remote Control Camera Application (RCCA) can control camera settings as well as multiple cameras. The camera also features SRT protocol, enabling IP streaming of video and audio. Built-in ND Filters, Improved Body Design, Compact and Lightweight The EOS C80's compact mechanical ND filter assembly is specifically designed for the RF mount's short flange back. Buttons for direct control of ND filters are located on the right-hand side of the camera. The EOS C80 provides up to ten stops of ND filtration, allowing users to shoot in various lighting conditions. The use of ND filters allows a camera operator to adjust exposure while maintaining the depth of field. The RF mount's short flange back allows the EOS C80's body to be small and lightweight, making the camera just as comfortable on a drone or a gimbal as it is on your shoulder, a tripod, or any configuration where compact size and light weight are important. The camera also has an ergonomic design with a new, lightweight handle assembly, and the Multi-function Shoe is located just above the LCD screen. Adding to the versatility of this camera, a new quarter-inch baseplate mounting hole under the front of the EOS C80 will add even more options for securing and positioning the camera in a variety of shooting situations. Mount Adapter PL-RF with Cooke/iCompatibility The Mount Adapter PL-RF, new to the RF ecosystem, unlocks a broad assortment of PL mount lenses for Canon's RF cameras. The adapter is compatible with Cooke/i Technology's metadata protocol and includes lock plates to ensure a secure lens mount. Auto Clear Scan Mode The Auto Clear Scan setting available in the C80, is an automatic shutter mode setting that can detect the frequency of light sources between 50.0 Hz to 2011.2 Hz to help reduce or virtually eliminate the flickering in some LED walls. Canon Multi-Camera Control App The EOS C80 is compatible with the Canon Multi-Camera Control App for iPhone. This app empowers camera operators to have control over recording start and stop, focus, zoom and iris, ND Filters, ISO, Shutter, White Balance, Custom Picture and more, all while viewing the image from the camera. The C80's built-in Ethernet and Wi-Fi connectivity enables centralized control via the Remote Camera Control Application (RCCA). RCCA provides simultaneous camera control for up to nine cameras with video - achieving a "multi-camera operation". At a video production or broadcasting site, an operator can select a camera from the videos displayed on the "Connected Camera List", within the application and operate it from the "Camera Control Area" in the control panel of the software. The software is included and can be installed immediately without having to prepare a hardware controller in advance making it easy to use for the operator while creating an effective one-person operation.Features6K Full-frame Back-illuminated stacked CMOS sensorTriple-base ISO (800, 3200, 12,800)Internal recording: 6K 30P Cinema RAW Light, XF-AVC, XF-HEVC S and XF-AVC SDual Pixel CMOS AF II12G SDI and a variety of interfaces including Wi-Fi and EthernetBuilt-in ND filters, improved body design, compact and lightweightSpecificationsLens MountCanon RF mountLensRF lens(including RF-S lens, RF cinema lens), EF lens (including EF lens, EF cinema lens (when equipped the RF-EF mount Adapter, sold separately) PL lens (when equipped the Mount Adapter PL-RF, sold separately)Supports /i TechnologyCooke Communication Protocol: Only when equipped with Mount Adapter PL-RF.Lens-RelatedTypeColor wide LCD monitorScreen Size3.5 inch (diagonal 8.8 cm)Number of DotsApprox. 2.76 million dots (1280xRGBx720)Field of View Coverage100%Adjustment FunctionBrightness, Contrast, Color, Sharpness, LuminanceTouch PanelElectrostatic capacitance system. Touch/drag operation supported.Video Display UnitSensorFull-Frame back-illuminated stacked CMOS sensorSensor ModesFull-Frame, Super 35mm (Crop)Total PixelsApprox. 26.67 megapixels (6202x4300)Number of Effective PixelsSensor mode: Full frame: Approx. 1904.5 MP (6008x3170): When 6000x3164 / 4096x2160 / 2048x1080 is selected as the resolution Approx. 1786.0 MP (5634x3170): When 3840x2160 / 1920x1080 is selected as the resolution Sensor mode: Super 35mm (Crop): Approx. 1010.9 MP (4376x2310): When 4368x2304 / 4096x2160 / 2048x1080 is selected as the resolution Approx. 948.0 MP (4104x2310) : When 3840x2160 / 1920x1080 is selected as the resolutionUnit Pixel6.0 x 6.0 (microm)Effective Screen SizeSensor mode: Full-Frame 36.0 x 19.0mm (40.7mm on the diagonal) When 6000x3164 / 4096x2160 / 2048x1080 is selected as the resolution 33.8 x 19.0mm (38.7mm on the diagonal) When 3840x2160 / 1920x1080 is selected as the resolutionEffective Screen Size (Contd.)Sensor mode: Super 35mm (Crop) 26.2 x 13.8mm (29.6mm on the diagonal) When 4368x2304 / 4096x2160 / 2048x1080 is selected as the resolution 24.6 x 13.8mm (28.2mm on the diagonal) When 3840x2160 / 1920x1080 is selected as the resolutionFilterRGB primary color filter (Bayer array)S/NBoth are measured values of output signals. The measurement method is based on ARIB TR-B45. - 59.94 Hz mode: 67 dB (Typical) Full frame: 3840x2160 / 29.97P, BT.709 Standard Base Sensitivity ISO 160 (Dynamic range 300%) - 50.00 Hz mode: 67 dB (Typical) Full frame: 3840x2160 / 25.00P, BT.709 Standard Base Sensitivity ISO 160 (Dynamic range 300%)Dynamic RangeCanon Log 2: 1600% / 16 stops (at Base Sensitivity ISO 800) Canon Log 3: 1600% / 14 stops (at Base Sensitivity ISO 800)Sensitivity59.94 Hz: f/10 (59.94P) / f/14 (29.97P) 50.00 Hz: f/11 (50.00P) / f/16 (25.00P) All values for ISO 800,2000 lux, and reflectance rate of 89.9%. Some lens specifications may not enable these f-numbers.Main Rec FormatFull-Frame: RAW: XF-AVC, XF-AVC S, XF-HEVC S Super 35mm (Crop): RAW: XF-AVC, XF-AVC S, XF-HEVC SMain ResolutionFull-Frame: 6000x3164 4096x2160, 3840x2160, 2048x1080, 1920x1080 Super 35mm (Crop): 4368x2304 4096x2160, 3840x2160, 2048x1080, 1920x1080Video FormatRAW XF-AVC XF-AVC S XF- HEVC SRecording/Video Compression FormatRAW: Cinema RAW Light (Canon original) XF-AVC: MPEG-4 AVC/H.264 XF-AVC S: MPEG-4 AVC/H.264 XF- HEVC S: HEVC/H.265AudioRAW/XF-AVC: Linear PCM (24 bit 48kHz) 4 channels XF-AVC S/XF- HEVC S: MPEG2-AAC LC (16 bit 48kHz) 2 channels Linear PCM (24 bit 48kHz) 4 channelsSensorSensor ModeFull-Frame RAW: Photo Resolution: 4096x2160 XF-AVC, XF-AVC S / XF-HEVC S: Main Resolution: 4096x2160, 2048x1080, 3840x2160, 1920x1080 Photo Resolution: 4096x2160, 3840x2160 Super 35mm (Crop) RAW: Photo Resolution: 4096x2160 XF-AVC, XF-AVC S / XF-HEVC S: Main Resolution: 4096x2160, 2048x1080, 3840x2160, 1920x1080 Photo Resolution: 4096x2160, 3840x2160Recording dataSD CardPhoto RecordingNumber of slots2TypeSD, SDHC, SDXCSpeed classSpeed class: C6, C10 UHS speed class: U1,U3 Video speed class: V30, V60, V90File systemSD card (2GB) : FAT12,16 SDHC card (up to 32GB): FAT32 SDXC card (32GB to 2TB): exFAT File division units: FAT32 is 4GB, exFAT is none Maximum of 999 file divisions per clip (FAT32 only)Maximum number of clips per media999OtherIn addition to proxy recording and photos, recording of custom pictures, metadata, and menus, etc., is also possibleMedia - SD CardSlow and Fast Motion RecordingFrame rate: Available frame rate for Slow & Fast Motion Recording: 59.94P: 1, 2, 3, 6, 15, 30, 44, 48, 52, 56, 60, 90, 120, 150, 180 29.97P: 1, 2, 3, 6, 15, 22, 24, 26, 28, 30, 32, 36, 40, 44, 48, 52, 56, 60, 90, 120, 150, 180 50.00P: 1, 5, 15, 25, 34, 38, 42, 46, 50, 54, 58, 60, 75, 100, 120, 125, 150, 175, 180 25.00P: 1, 5, 15, 17, 19, 21, 23, 25, 26, 28, 30, 34, 38, 42, 46, 50, 54, 58, 60, 75, 100, 120, 125, 150, 175, 180Slow and Fast Motion Recording (Contd.)23.98P, 24.00P: 1, 2, 3, 6, 12, 16, 18, 20, 22, 24, 26, 28, 30, 32, 36, 40, 44, 48, 52, 56, 60, 72, 96, 120, 144, 168, 180Exposure controlExposure control methods are as follows Manual: Manual setting using shutter, iris, ISO/Gain, and ND filter Push Auto Iris: While the Push Auto Iris button is pressed, the aperture is controlled to achieve proper exposure. If deviation from the proper exposure occurs, it takes control again Auto Iris: Constantly adjusts automatically for proper exposure using irisExposure control (Contd.)Auto ISO/Gain: Constantly adjusts automatically for proper exposure using ISO/Gain Other: AE Response can be changed in the menu Auto ISO/Gain can be used in combination with Auto Iris or Push Auto IrisMetering systemStandard (center-weighted metering) Spotlight BacklightExposure compensationAn AE shift function is provided. The target value ( +/-8 steps from center) for the brightness can be set The values are indicated as exposure values (EV) Correction can be set in 0.25 increments from +/-0 to +/-2.0 Shutter setting: Off, Speed, Angle, Clear Scan, or Slow can be selected as the display formatAuto Clear Scan SettingWhen flicker occurs while shooting under a light source with highspeed flickering, (Auto Clear Scan Setting) can be used to detect the frequency of light sources within the range of 50.0 Hz to 2011.2 Hz, display the shutter speed according to the flicker speed, and allows shooting with minimized flicker.Auto Clear Scan Setting (Contd.)Detection accuracy may decrease under the following conditions: Repeating patterns (e.g.: lattice/grid patterns, striped patterns, etc.) A moving subject that does not stay still Extreme brightness or darkness Multiple light sources on the screen The flickering comes from a small light source Low subject illuminanceIris SettingsIris settings function is provided for RF lens, RF Cinema lens, EF lens, EF Cinema lens and PL lens. 1/2 stop, 1/3 stop, or fine display can be selected. Which numerical values can be displayed depends on the lens specifications. Fine: The smallest iris increment allowed by the lens attachedIris Settings (Contd.)Step 1/2: 0.7 / 0.8 / 1.0 / 1.2 / 1.4 / 1.8 / 2.0 / 2.5 / 2.8 / 3.5 / 4.0/ 4.5 / 5.6 / 6.7 / 8.0 / 9.5 / 11 / 13 / 16 / 19 / 22 / 27 / 32 / 38 / 45 / 54 / 64 / 76 / 91 / closed Step 1/3: 0.7 / 0.8 / 0.9 / 1.0 / 1.1 / 1.2 / 1.4 / 1.6 / 1.8 / 2.0 / 2.2 / 2.5 / 2.8 / 3.2 / 3.5 / 4.0 / 4.5 / 5.0 / 5.6 / 6.3 / 7.1/ 8.0 / 9.0 / 10 / 11 / 13 / 14 / 16 / 18 / 20 / 22 / 25 / 29 / 32 / 36 / 40 / 45 / 51 / 57 / 64 / 72 / 81 / 91 / closedZoom-linked f No. CompensationWhen using a lens whose f-number changes as zooming is performed, select (On) on the menu for exercising control to change the iris diameter so that the f-number will be kept constant in tandem with the zooming; alternatively, select (Off) for not exercising this control. When (On) is selected, the f-number remains constant, but the iris drive will make a sound, and the sound of this operation may be recorded.Zoom-linked f No. Compensation (Contd.)Also, luminance may change due to the iris drive. When (Off) is selected, the f-number changes as zooming is performed, but there is no sound of the iris operation, and neither is the luminance changed by the iris drive.ISO Sensitivity 1 stop displayBase ISO automatic switching: 100, 160, 200, 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 102400 Base ISO 160, Base ISO 400, Base ISO 800: 100, 160, 200, 400, 800, 1600, 3200, 6400, 12800 Base ISO 640, Base ISO 1600, Base ISO 3200: 400, 640, 800, 1600, 3200, 6400, 12800, 25600, 51200 Base ISO2500, Base ISO6400, Base ISO12800: 1600, 2500, 3200, 6400, 12800, 25600, 51200, 102400ISO Sensitivity 1 stop display (Contd.)Base ISO automatic switching: 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 16000, 20000, 25600, 32000, 40000, 51200, 64000, 80000, 102400 Base ISO 160/400/800: 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800ISO Sensitivity 1 stop display (Contd..)Base ISO 640/1600/3200: 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 16000, 20000, 25600, 32000, 40000, 51200 Base ISO2500/6400/12800: 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 16000, 20000, 25600, 32000, 40000, 51200, 64000, 80000, 102400Gain (dB) NormalBase ISO automatic switching: -6 dB, -3 dB, -2 dB to 42 dB, 45 dB, 48 dB, 51 dB, 54 dB Base ISO 160/400/640/800/1600/3200: -6 dB, -3 dB, -2 dB to 30 dB, 33 dB, 36 dB Base ISO 2500/6400/12800: -6 dB, -3 dB, -2 dB to 18 dB, 21 dB, 24 dB, 27 dB, 30 dBFineBase ISO automatic switching: (ISO/Gain Extended Range) is (On): Between -2dB to 54dB, can be set in 0.5dB increments (ISO/Gain Extended Range) is (Off): Between -2dB to 42dB, can be set in 0.5dB increments Base ISO 160/400/640/800/1600/3200: (ISO/Gain Extended Range) is (On): Between -2dB to 36dB, can be set in 0.5dB increments (ISO/Gain Extended Range) is (Off): Between -2dB to 30dB, can be set in 0.5dB incrementsFine (Contd.)Base ISO 2500/6400/12800: (ISO/Gain Extended Range) is (On): Between -2 dB to 30 dB, can be set in 0.5 dB increments (ISO/Gain Extended Range) is (Off): Between -2 dB to 18 dB, can be set in 0.5 dB incrementsSlow and Fast Motion RecordingDaylight5600 K (Initial value: 5600 K / +/-0 CC) Adjustable range: 4300 K - 8000 K / -5 CC - +5 CCTungsten3200 K (Initial value: 3200 K / +/-0 CC) Adjustable range: 2700K - 3700K / -5 CC - +5 CCColor Temperature SettingAdjustable range: 2000 K - 15000 K / -20 CC - +20 CC Initial value: 5600 K / +/-0 CCSet A/Set BBoth adjustable range and initial values are same as Kelvin settings.WB Adjustment ResolutionColor temperature direction K: 5-mired (1 Mired=106/Kelvin) or 100 K increments. UV direction CC: 1 CC incrementsOthersIncludes a function for smooth transitions when white balance is changed (sockless white balance). The response during AWB can be selected. (AWB Response) AWB operation can be paused when activated. (AWB Hold) It is allocated to one of the assignable buttons. The color temperature increment can be set to (Mired) (5-mired increments) or (Kelvin) (100-Kelvin increments). If mired is selected, the value is converted to Kelvin for displayFocusing SystemsDual Pixel CMOS AF CMOS AF detection range When detecting the entire area and subject, approx. 100% (Vertical) x approx. 100% (Horizontal). Otherwise approx. 100% (Vertical) x approx. 90% (Horizontal) May be approx. 100% (V) x approx. 80% (H, approx. 75% (V) x approx. 40% (H) depending on the lensAF ModesModes available are (Continuous AF) and (One-Shot AF). All of these modes enabled by switching the AF/MF switch of the RF lens to AF. Continuous AF: Used to keep continuously focused on a subject One-Shot AF: AF is performed only while the One-Shot AF button to which it has been assigned is held down. No further lens movement is permitted after focusing.AF Modes (Contd.)When (Lens action if cannot AF) is set to (Stop) in Continuous AF mode, stop the search when distance measurement is not possible.AF Frame SizeSmall Zone: Video display range approx. 15.9% (Vertical) x 11.8% (Horizontal) Zone: Video display range approx. 43% (Vertical) x 25% (Horizontal) Large Zone (Horizontal): Video display range approx. 43% (Vertical) x 76% (Horizontal) Large Zone (Vertical): Video display range approx. 97% (Vertical) x 25% (Horizontal) Full: approx. 100% (Vertical) x approx. 100% (Horizontal)AF Frame MovementAvailable. The frame can be moved to any position by operating the joystick.AF LockAvailable.AF SpeedThe AF speed (10 steps) and AF response (7 steps) can be changed.Subject Detection AFThe subject detection function automatically detects the face/head, eyes or body of a person or animal, according to the menu settings. iWhen using autofocus, if (Subject to detect) is set to (People), a white frame will be displayed around the main subject of the detected people (and a gray frame will be displayed for other subjects), however when it is set to (Animals)Subject Detection AF (Contd.)A white frame will be displayed only around the main subject of the detected animals or people.Tracking AFThe main subject can be selected and tracked with the joystick or the touch panel. This function needs to be assigned to the assign button. It is also possible to perform AF on the subject being tracked.Subject Tracking After Focus OperationA function that automatically performs AF tracking on the focused subject after the focus is manually shifted to the de- sired subject. If there is no focused subject, AF tracking will not be performed, and AF will be performed on an automati- cally chosen subject. The tracking frame (orange) can also be displayed.Eye DetectionWhen Eye Detection is ON, a detection frame is displayed over eyes for both people and animals when any eyes have been detected.Audio Input Selection (CH1/CH2 Input)This selects the input terminal to be recorded on CH1/CH2. The choices are INPUT terminal, MIC terminal, Monaural mic and Multi-Function Shoe (When compatible multi-accessory shoes equipped).CH2 InputThis selects the input terminal to be recorded on CH2. The choices are INPUT 2, INPUT 1, MIC terminal and Monaural mic.Audio Input Selection (CH3/CH4 Input)This selects the input terminal to be recorded on CH3/CH4. The choices are INPUT terminal, MIC terminal, Monaural mic and Multi-Function Shoe (When compatible multi-accessory shoes equipped).CH1/CH2 (CH3/CH4) ALC LinkSelects whether to link the two channels for audio recording levels input to CH1/CH2 (CH3/CH4) or operate separately.Audio Rec Level CH3 (CH4, CH3/CH4)Select Auto or Manual for the audio levels recorded to CH3/CH4 (CH4, CH3/CH4) . If you choose Manual, you can adjust the level from 0 to 100.INPUT (1 / 2) Mic TrimmingThis function is used to set the sensitivity of the mic input of INPUT (1 / 2). -12 dB, -6 dB, 0 dB, +6 dB, or +12 dB can be selected.INPUT1 (1 / 2) Mic Att.Function used to attenuate the INPUT 1 / 2 connector mic input by 20 dB.NPUT1 (1 / 2) Mic Low CutInserts a low-cut filter into the audio input to the INPUT (1/2) mic input. There is a mode for recording mainly human voices, and a mode for reducing the effect of the "banging" sound of the wind when shooting in a windy place such as near a beach or a building, or outdoors which is always affected by the wind.INPUT Reference LevelSwitches the reference level of the INPUT terminal between -18dB and -20dB.INPUT LimiterThis function prevents signal distortion from high-level manual signal input to INPUT. ON or OFF is selected.MIC Att.Function that attenuates the microphone terminal (3.5 mm) input by 20 dB.MIC Low CutThis function cuts off the low-frequency components in the mic input signals of the microphone terminal (3.5 mm) same as those of the INPUT1 (1/2) micro cut.MIC InputSet the input sensitivity to the MIC terminal and switches the power supply on/off. When ( MIC (with Power Supply)) is selected: Sensitivity setting is (MIC) and power supply is turned on. When (LINE"" is selected: Sensitivity setting is (LINE) and power supply is turned off.Multi-Function Shoe InputTo display a menu corresponding to an accessory connected to a multi- accessory shoe. Shoe Mic Attenuator Shoe Mic Low Cut Shoe Mic Directionality Subunit (1 / 2) Recording mode Subunit (1 / 2) Recording Level Machine (1 / 2) Wind cut Aircraft (1 / 2) Attenuator Wireless Mic Mixing MUTE button Movie recording button Tally Lamp Display Wireless Mic Status1 kHz ToneThis function is used to output/record a 1 kHz tone during color bar output. -12 dB, -18 dB or -20 dB can be selected as the function's setting.Headphone VolumeThis enables the headphone volume to be set to any level from 1 to 15 (a total of 16 steps including (Off)).Speaker VolumeThis enables the speaker volume to be set to any level from 1 to 15 (a total of 16 steps including (Off)).Monitor ChannelsThe allocation for audio output channels to the two headphone output channels (Left/Right). The following selections are available. HDMI OUT and SDI OUT terminals are not supported. CH1/CH2, CH1/CH1, CH2/CH2, CH1+2/CH1+2, CH3/CH4, CH3/CH3, CH4/CH4, CH3+4/CH3+4, CH1/CH3, CH2/CH4, CH1+3/CH2+4HDMI OUT ChannelsThis selects the channels whose signals are to be output to the HDMI OUT terminal. Either (CH1/CH2) or (CH3/CH4) is selected.Image QualityAssist FunctionOutput to LCD monitor, SDI OUT terminal, HDMI OUT terminalConfirm FocusFocus Guide: The focus guide gives you an intuitive visual indication of the current focus distance and the direction and amount of adjustment necessary to bring the selected subject into full focus. Peaking (contour enhancement): With the peaking function, the colors (white, red, blue and yellow) can each be set, and the frequency (edge thickness: 1 to 4) and gain (effect level: 1 to 15) can each be adjusted.Confirm Focus (Contd.)Magnification: Screen display can be enlarged by roughly 2x, 5x and 10x by pressing the MAGN. button. It is also possible to move the magnification area by operating the joystick.Confirm ExposureFalse Color Display: A feature which superimposes false colors for output images at specific luminance levels so that the system can visually deter- mine the exposure state. Brightnesses other than those specified below are given achromatic colors. Colors: Index Displays (Definition) Red: White clipping Yellow: Just below white clipping Pink: One stop over 18% grayConfirm Exposure (Contd.)Green: 18% gray Blue: Just above black clipping Purple: Black clipping Zebra: The high-brightness sections of the subject are displayed on the monitor as a black and white zebra pattern. Either zebra pattern display in the range (Zebra 1) prescribed by the luminance level or at a level higher than the prescribed level (Zebra 2) is selected. Zebra 1 & 2 can also be selected. For the detailed settings, refer to the menus.Confirm SignalsWave Form Monitors (signal level): Line display Line + spot: Line display over a red waveform in a red frame Line select display RGB (parade) display YPrPb (parade) display You can also change the size and set the transparency. For HDR-PQ images, displays the video scope in nits (cd/ sq. m) and the narrow range's (video range) waveform monitor.Confirm Signals (Contd.)For HDR-HLG images, the Y axis shows a relative-index value between 0 and 1000 nits. Vector scope (Intensity or hue of the chrominance signal): Normal/spot display (in the red frame) can be selected. Additionally, output gain can be selected as either 1x or 2x. You can also set the transparencConfirm Signals (Contd..)Color Bar: Displays the reference signal (SMPTE/EBU/ARIB) and adjusts the color and brightness of the TV or external monitor. At the same time, record 1Khz test toneConfirm Composition,Safety ZoneCenter Marker, Horizontal (Vertical) Marker, Grid Marker, Aspect Marker, Safe Area Marker, User Marker User Markers can be set to the desired size and position. A color can be set for each marker. User Marker: Increased number of settings Increased setting methods Size settings: In addition to pixels, added scaling and aspect ratioConfirm Composition,Safety Zone (Contd.)Position settings: In addition to central specification, added upper-left specification and central alignment with other markers Marker display in MEDIA modeAssist FunctionInput TerminalsMic Terminal: 3.5 mm stereo mini jack (Unbalanced, plugin power supported) MIC: Input impedance: 1.5 k Ohm Sensitivity: -72 dBV (Volume auto, Full scale - 18 dB) ATT: 20 dB Supply voltage: DC 2.4 V (Bias resistor 2.2 k Ohm) LINE: Input impedance: 10 k Ohm Sensitivity: -12 dBV (Volume center, Full scale -18 dB) Remote A Terminal: 2.5 mm stereo mini jackInput Terminals (Contd.)INPUT1 Terminal, INPUT2 Terminal: Mini XLR 3 pin jack (Balanced) (1) Shield, (2) Hot, (3) Cold) MIC: Input impedance: 600 Ohm Sensitivity: -60 dBu (Volume center, Full scale - 18 dB) ATT: 20 dB LINE: Input impedance: 10 k Ohm Sensitivity: +4 dBu (Volume center, Full scale - 18 dB)Output TerminalsSDI Out Terminal: Video: HD: SMPTE 292, 3G: SMPTE 424, SMPTE 425, 6G: SMPTE ST 2081, 12G: SMPTE ST 2082 Audio: SMPTE ST 299-1, SMPTE ST 299-2 Output signal level: 0.8 Vp-p Output impedance: 75 Ohm Headphone Terminal: 3.5mm stereo mini jack Output impedance: 50 Ohm Output signal level: -17 dBV (32 Ohm load, maximum volume)Input/Output TerminalsUSB Terminal: USB Type-C jack, Super Speed USB (USB3.2 Gen1x1) equivalent, allows connection to smartphones or GP-E2. Supports UVC (USB Video Class) TIME CODE Terminal: BNC jack terminal Input: Input impedance: 100k Ohm, Signal level: 0.5-4.5 Vp-p Output: Output impedance: 50 Ohm, Signal level: 1.3 Vp-p Ethernet Terminal: RJ45 Connector (1000BASE-T compatible)Other TerminalsDC IN 24V Terminal: DC Jack Multi-Function Shoe Terminal: Canon original specificationsInput/Output TerminalsEthernetSupported standards: 1000BASE-TWi-FiSupported standards: IEEE 802.11a/b/g/n/ac Frequency band: 2.4 GHz, 5 GHz Available channels vary depending on destination Setup: Infrastructure (WPS: push button method, WPS: PIN code method, searching for Access Points, manual), Camera Access Point Security: Open, Shared key, WPA/WPA2/WPA3-Personal, WPA/WPA2/WPA3-Enterprise Encryption methods: WEP-64, WEP-128, TKIP, AESNetworkCompression MethodMPEG-4 H.264/AVCBit Rate/Resolution9 Mbps: 1920x1080 (59.94p, 59.94i, 50.00p, 50.00i) 4 Mbps: Same as aboveAudioMPEG-2 ACC-LC 2chAudio Rate256 KbpsProtocolsUDP: Prioritizes transfer speed, with no guarantees of reliability RTP: Standard system for sending videos and audio online. Lost or lagging packets ignored SRT: Achieves high-quality streaming with minimal video distor- tion due to low latency and a packet loss playback functionProtocols (Contd.)RTP+FEC: Error correction (FEC) control during RTP transfer enables recovery of lost or corrupt packets on the receiving side RTSP+RTP: Real-time data streaming control via RTSP (Real Time Streaming Protocol) and transfer via RTP. The receiving side can start or stop streamingIP StreamingApplication SoftwareCinema RAW Development Canon RAW Plugin for Avid Media Access Canon RAW Plugin for Final Cut Pro Canon XF Utility Canon XF Plugin for Avid Media Access MP4 Join Tool EOS VR Utility EOS VR Plugin for Adobe Premiere Pro Canon HEVC ActivatorApplication Software (Contd.)Live Link Plugin for Unreal Engine CV Metadata Plugin for Adobe After Effects CV Metadata Extraction Tool Content transfer Professional Remote Camera control Application Canon Multi-Camera controlApplication SoftwarePowerTerminal: DC IN 24V terminal: DC 24V (23.7V-25.0V) Battery terminal: DC 14.4 V (battery pack) Compatible battery: BP-A30N (provided with camera)/BP-A60N BP-A60/BP-A30Battery ChargingBP-A60N: Approx. 310 min. BP-A30N: Approx. 175 min.PowerPerformanceApprox. 32 to 104 Degree F (0 to 40 Degree C), 85% (Relative humidity)OperationApprox. 23 to 113 Degree F (-5 to 45 Degree C) , 60% (Relative humidity)Temperature & Humidity RequirementsBattery InfoRequired, includedBattery MaterialLithium ionBattery TypeNon-universalBattery Quantity1BatteryDimensions (W x H x D)Approx. 6.3 x 5.4 x 4.6" (160 x 138 x 116mm) (Camera body only) Approx. 6.3 x 10.9 x 6.8" (160 x 276 x 173mm) (Handle unit, Mic holder, Battery BP-A30N)WeightCamera body Approx. 2.9 lbs (1.31kg) Handle Unit: Approx. 5.5 oz (155g) BP-A30N Battery Pack: Approx. 8.6 oz (243g) CA-CP300 B Compact Power Adapter: Approx. 7.7 oz (219g) Battery Charger CG-A20: Approx. 5.1 oz (145g) Microphone Holder + 2 screws: Approx. 2.1 oz (60g)Weight (Contd.)Total weight at the time of shooting: Camera with BP-A30N battery, 2 cards: Approx. 3.4 lbs (1.54kg) Camera with handle unit, microphone holder, BP-A30N battery, 2 cards: Approx. 3.9 lbs (1.75kg) (In WHO WE ARE Adorama is one of the nation's largest Photographic retail and mail order suppliers. For over 35 years we have been serving professionals as well as amateurs in the photographic, video, digital imaging and telescope fields. We offer the best combination of quality services, vast selection, knowledgeable staff, and competitive pricing. Adorama Camera is your #1 source for the best and newest products in the photographic industry, and the largest inventory of items such as Digital Cameras, Digital Camera Accessories, Memory Cards, 35mm Cameras, Medium Format Cameras, Lenses, Video Cameras, TV's, MP3 Players, Binoculars, Telescopes, Scanners, Inkjet, Dye-Sub & Laser Printers, Office Fax machines, Shredders, Projectors, Inkjet Paper, Photographic Accessories, Filters, Batteries, Cases, Tripods, Flashes, Lighting & Studio Equipment, Film, Darkroom Products and Audio Video Equipment. All new equipment comes with all of the factory included accessories, including a full manufacturer's warranty, unless otherwise noted. We only post items that are in-stock and ready to ship. PAYMENT In an effort to comply with our Authorized Dealer contracts with the manufacturers and to best control our inventory levels we reserve the right to limit quantities or cancel orders to Resellers and Exporters. Please note: Inventory is not reserved until the item is paid for. Please include a phone number as the carriers and our Trucking Companies require it. INTERNATIONAL International taxes and duties: International shipments may be subject to import fees, duties and taxes, which are levied once a shipment reaches the respective country, in addition to the brokerage fees/custom clearance charges which may be imposed by the carrier. These charges must be borne by the recipient. Adorama has no control over these charges and cannot predict what they might be. Orders shipped using eBays (GSP) "Global Shipping Platform" have already paid their taxes and must contact eBay directly for any issues. SHIPPING Adorama's eBay store ships to the 48 Contiguous United States. We do not ship to APO & FPO, Alaska, Hawaii and Puerto Rico. We now ship many items to Canada, parts of Europe and Australia. If the item does not have the option, please don't ask. We do not ship to other International locations. Items with "free shipping" are only shipped free to the 48 contiguous United States.Combined shipping is available by using the Add-to-Cart button and confirming that the shipping carriers for each item are the same BEFORE making the Payment. eBay's new checkout will then consolidate your items and present to you the better shipping rates. All orders must be shipped with a printed invoice included. We can not ship orders without the invoice or a lower value invoice. Gift Invoices may be requested if you contact us immediately after payment during business hours. No guarantees for other times. Shipment errors due to a bad address entered by the buyer and will not be credited for shipping charges if returned or at all if lost or abandoned by the carrier. We supply tracking information directly to your eBay account within 24 hours after the shipment leaves our warehouse. Please make sure to check your eBay email address and that it does not go into spam or junk. Approved Change Requests may not be updated on eBays portal, please check the emails. Returns For the first 30 days from date of receipt of your purchase you may return the merchandise for a full money back refund, excluding any shipping charges (for items which we offer free shipping, our standard shipping charges will be deducted from any refund or credit). Returned or exchanged products must be in brand-new, mint condition. Items must be in the original, undamaged manufacturer's packaging with all packaging materials, including instruction booklets, packing inserts, and the blank warranty cards. Memory cards and any other Blister Pack items are not returnable once opened. Any merchandise missing the original Universal Product Code (UPC) cannot be returned. The manufacturer's labeled packaging must be enclosed within an additional shipping carton. Please do not place stickers or shipping labels on the original manufacturer's package. Printers are not returnable once the Toner Cartridges have been installed or released.Desktop Computers, Laptops, Tablets & Notebooks are not returnable once they have passwords or other software installed, have been registered with or returned to the manufacturer for any reason. Please use the Return this Item or Contact Seller button on your Purchase History page to ask us any questions or request a return. Adorama cannot accept COD or freight-collect shipments. Please enclose a copy of your invoice with your return and tell us whether you would like the item to be replaced or refunded. Returns can take up to 8 days in-house from the date we receive it to process. When returning an item, please make sure you use a shipper which provides you with Insurance and a tracking number. Items returned without a tracking number might take much longer to be processed. If you live in New York you may bring the return to our Manhattan store for exchange or refund. Hours of operationMon-Thurs: 9:00am - 6:00pm Friday: 9:00am - 1:00pm : 12pt;"> 9:00am - 6:00pm Friday: 9:00am - 1:00pm

Price: 5531.56 USD

Location: Elizabeth, New Jersey

End Time: 2025-01-22T09:25:42.000Z

Shipping Cost: N/A USD