Clay Bar Mitt Red Heavy Car Detailing Cleaning Paint Decontamination Autobright

Description: The Autobright Clay Mitt is a must-have for car enthusiasts looking for a reliable way to clean their vehicle without causing any damage to the paint. This mitt is specially designed for clay detailing and paint decontamination, making it an excellent choice for anyone who wants to maintain their car's appearance. With a heavy clay mitt, the surface preparation is straightforward, and the microfibre mitt ensures that the cleaning process is gentle on the car's paint.The mitt is perfect for car detailing enthusiasts and is a featured refinement in the car detailing category and is an excellent addition to any car care kit. Using our Clay Mitt is the quickest and easiest method to remove contaminants from your vehicle. Producing an amazingly smooth surface prepared for paint renovation, waxing or paint sealant application. This new process is much quicker than using the traditional clay bar, saving you time and money and is the perfect accessory to use in the important preparation stage. Our Clay Mitt consists of one side microfibre and the other constructed in a high-tech polymer coating,that whilst washing your vehicle, removes above surface contaminants such as rail dust, fresh tree sap, water spots and paint overspray from paintwork, glass, mouldings, plastic and metal. Our Clay Mitt is easily cleaned of contaminants by rinsing in a bucket of water. General shampooing and snow-foaming will not remove embedded contaminants and these may not always be visible to the naked eye, but when you glide your hand over the surface it will feel rough. If the surface isn’t smooth then your polishes will not be as effective and your wax or sealant coating will not fully bond to the surface. If you are an avid car enthusiast that wants pure perfection, then this is the perfect accessory for your detailing kit. Until recently the way to remove contaminants was to use a clay bar, but our Autobright Clay Mitt takes paint decontamination to an advanced level. No need to reshape or mould the clay and if it is dropped you do not need to discard it – just simply rinse in a bucket. It quickly & easily removes • paint over-spray • rail dust • brake dust •. industrial pollution Works on •. mouldings •. automotive paint • glass • plastic Simply rinse after use and re-use time and time againRemoves contamination faster than clay Directions for Use: 1. It is important your vehicle's surface is clean and cool to touch before you start the removal process 2. Starting at the top of the vehicle spray the Clay Mist onto a panel and on the Nano Clay Mitt Towel then gently glide the towel back and forth across the panel. 3. Keep going until the Nano Clay Mitt glides easily across the panel and run your hand over it to check its smoothness. 4. Continue around the whole vehicle and then remove the clay lubricant with a microfibre towel. 5. Once finished apply either a paint sealant or wax in order to seal out paint contaminants and debris. Note: Our Blue medium grade clay mitt is designed for vehicles with moderate to heavy contaminants Our Red heavy grade clay mitt is designed for vehicles with heavy contaminants.

Price: 9.95 GBP

Location: Broxbourne

End Time: 2024-08-27T14:28:38.000Z

Shipping Cost: 17.44 GBP