Description: MAX CLR A/BFDA COMPLIANT FOR DIRECT FOOD CONTACT COATING CLEAR LIQUID RESIN (48 Fluid Ounces Combined Volume) 1 Quart Of MAX CLR Part A -Resin And 1 Pint MAX CLR Part B -Curing AgentPRODUCT DESCRIPTIONMAX CLR is a versatile, tough and resilient epoxy resin that can be used for many other applications such as: FDA Compliant Food Safe Coating *Hobby and Crafts Adhesive/CoatingProtective and Decorative CoatingsElectronic Potting, Insulating, EncapsulatingClear Penetrating Gel Coat Repair For Sealing CracksJust measure out two parts Part A to one part Part B, mix and apply and allow to cure overnight. It has a 45-minute working time and can be handled in 6 hours. Handling strength will develop in 10 hours of room temperature curing and will fully cure within 24 to 36 hours. Heat curing is also ideal for a faster cure time. The mixed consistency is similar to a very light syrup (800 cPs).*NOTICE REGARDING FOOD SAFE RESIN SYSTEMSThis formulation is in accordance with CFR Title 21, Part 175.300 and 175.105 for direct and indirect food contact as a resinous adhesive or coatings.For Coatings Applications https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/CFRSearch.cfm?fr=175.300 For Adhesives Applicationhttps://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/CFRSearch.cfm?fr=175.105Proper care must be taken to ensure all usage instructions such as accuracy of mix ratio proportioning, component mixing to a homogeneous state and established curing schedule must be observed. Please make sure to review all published usage instructions and processing information posted on this item page. Proportioning the resin and curing agent by weight must be observed to achieve an accurate mix ratio and reduce the likelihood of improper proportioning.The FDA CFR Title 21 175.300 (coatings applications) only provides a list of raw materials and chemical compounds that can be utilized for the formulation of the MAX CLR and similar resin system for the same purpose. We validate the efficacy of the MAX CLR formulation by performing our internal laboratory extractable and leachable studies and deem its suitable performance.The user should thoroughly test any proposed use of this product and independently conclude satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain and validate said approval.IMPORTANT GUIDELINES FOR FOOD CONTACT APPLICATIONSFor food contact applications, MAX CLR A/B must be fully cured to ensure no chemical leaching can occur when foodstuffs' come in contact with the cured resin system. Any uncured chemical compounds from the improperly prepared MAX CLR may be extracted and cause cross-contamination or leaching during food contact. Please review the following and to avoid any curing problems. · Weigh or measure the components accurately at a 2:1 mix ratio. Any off-ratio excess of either the resin or curing agent in the mixture can cause poor cure and can cause chemical leaching that can transfer to the food or beverage. Use a digital scale and weigh each component for best results, for example, a 200-grams of MAX CLR PART A will require 100 grams of MAX CLR PART B. Careful accuracy must be observed when proportioning the resin & curing agent to ensure the proper cured performance of the MAX CLR A/B resin system. This digital scale is available on eBay for purchase.Purchase this scale with any of our product offering and the shipping cost of the scale is free.https://www.ebay.com/itm/222630300203Processing Oven Rinse the cured coating with warm water and mild detergent before allowing any food contact. If an oven is not available, an infrared heat lamp will work well for heat curing.Parameters Of Consideration For Food Contact Coatings Per Title 21 FDA CFR 175.105This product and its composition are in compliance with Title 21 FDA CFR 175.105 and CFR 175.300 This product and its composition is in compliance with title 21 FDA CFR 175.xxx. This confirmation is limited to the use of this product in the above food contact applications and does not apply to any use in drug, medical device, cosmetic products or packaging. It is the responsibility of the drug, medical device, or cosmetic manufacturer to establish all material use complies with any related government regulations. The product may be used based on the “no-migration”-principle, i.e. if FDA – recognized migration modeling or studies show no detectable migration (transfer of substance to food) in a particular application, the product can be used legally. However, final legal compliance needs to be verified by the producer of the final article under consideration of the final application and the conditions of use of the product.------------------------------- MAX CLR RESIN SYSTEMMAX CLR COMES IN SEVERAL OTHER VERSIONS AND KIT SIZESTHE MAX CLR SERIES OF EPOXY RESINS PRIMARILY FORMULATED FOR CRYSTAL COLOR CLARITYCOLOR STABILITY THAT EXHIBITS LEAST DARKENING OR YELLOWING OVER TIME**VERY HIGH GLOSS AND SURFACE DURABILITYIMPACT RESISTANCEEASE OF USE 2:1 MIX RATIO BY WEIGHT OR VOLUMEEXCELLENT ADHESION TO NUMEROUS SUBSTRATESMAX CLR COMPARED TO COMPETITIVE EPOXY SYSTEM CLAIMING CRYSTAL CLARITYPhysical And Mechanical PropertiesViscosityDensityForm and Color800 – 1,200 cPS @ 25°C Mixed1.10 g/ccClear Transparent LiquidMix Ratio100 Parts to 50 Parts A By Weight or by Volume 2:1 (Part A to Part B)Working Time45 Minutes @25°C (77°F 100-gram mass)Peak Exotherm70°C (158°F, 100-gram mass)Handle TimeFull Cure Time5.5 Hours36 Hours minimum @ 25°C (77°F)Hardness72± 5 ShoreTee-Peel Strength5.7 Lbs per inch WidthTensile Shear Strength1,300 psi @ 25°C (77°F) 800 psi @ -80°C (-112°F) 550 psi @ 100°C (212°F)Elongation9.0% @ 25°C (77°F)Compressive Strength2,200 psiHeat Distortion Temp80°C (176°F) IMPACT RESISTANCE OF MAX CLR RESIN SYSTEMMAX CLR IMPACT RESISTANCEMAX CLR A/B HIGH IMPACT CRYSTAL CLEAR CASTING, COATING, FIBERGLASSING RESIN SYSTEM. ASTM D 3763 - YouTubeVideo will open in a new windowROTO-COATING OF MAX CLR ON WOOD TURNED BOWLMAX CLR EPOXY RESIN APPLICATION ON WOOD TURNED BOWL - YouTubeVideo will open in a new window HOT WATER IMMERSION TESTMAX CLR A/B EPOXY RESIN FDA Compliant Food Safe Coating - Hot Liquid Exposure Test - YouTubeVideo will open in a new windowClick Here To BASIC EPOXY RESIN USAGE AVOIDING EXOTHERMIC RUN AWAY REACTON - YouTubeVideo will open in a new windowCOVERAGE AND YIELD PER GALLONUSE THESE THEORETICAL FACTORS TO DETERMINE COVERAGE TO UNFILLED EPOXY RESIN AS A THEORETICAL GUIDE. PLEASE NOTE THAT THIS IS A 1.5 GALLON KIT AND THESE NUMBERS ARE BASED ON THEORETICAL PHYSICAL DATA. IT IS ALSO IMPORTANT TO CONSIDER THE TYPE OF SUBSTRATE TO BE COATED IN REGARDS TO ITS SURFACE ROUGHNESS AND POROSITY OR ABSORBENCY. EXAMPLE TO CALCULATE THE RESIN COVERAGE ON A FLAT SMOOTH SURFACE, DETERMINE THE LENGTH X WIDTH X THICKNESS IN INCHES EQUALSTHE CUBIC VOLUME INCH OF THE MIXED RESIN NEEDED. USE THE FOLLOWING EQUATION:1 GALLON OF RESIN CAN COVERS 1608 SQUARE FEETPER 1 MIL OR 0.001 INCH CURED COATING THICKNESSTHERE ARE 231 CUBIC INCHES PER 1 US GALLON (LENGTH X WIDTH X COATING THICKNESS)/ 231 CUBIC INCHES PER GALLON = CUBIC INCHES OF COATING NEEDEDFOR EXAMPLE50 INCHES X 36 INCHES X 0.010 (10 MILS) = 18 CUBIC INCHES18/231= .0779 GALLON OF MIXED RESIN USE THESE FACTORS TO CONVERT GALLON NEEDED INTO VOLUMETRIC OR WEIGHT MEASUREMENTS USE THE FOLLOWING FACTORS BY THE GALLON NEEDED:FOR EXAMPLE: 231 X .0779 = 17.99 CUBIC INCHESOR4195 GRAMS X .0779 = 326.79 GRAMSFLUID GALLON VOLUME CONVERSION1 GALLON = 231 CUBIC INCHES1 GALLON = 128 OUNCES1 GALLON = 3.7854 LITERS1 GALLON = 4 QUARTS1 GALLON = 16 CUPSFLUID GALLON MASS CONVERSIONS1 GALLON OF MIXED UNFILLED EPOXY RESIN = 9.23 POUNDS1 GALLON OF MIXED UNFILLED EPOXY RESIN = 4195 GRAMS PLEASE VIEW THE FOLLOWING VIDEO FOR THE PROPER MIXING OF EPOXY RESINS. IT DEMONSTRATES THE PROPER TECHNIQUE OF MIXING ANY TYPE OF EPOXY RESIN. THE PROPER CURE AND FINAL PERFORMANCE OF ANY EPOXY RESIN SYSTEM ARE HIGHLY DEPENDENT ON THE QUALITY AND THOROUGHNESS OF THE MIX. THE RESIN AND CURING AGENT MUST BE MIXED TO HOMOGENEOUS CONSISTENCY MAX CLR A/B AVAILABLE KIT SIZES24 OUNCE KIThttps://www.ebay.com/itm/22262396319448 OUNCE KIThttps://www.ebay.com/itm/31194732010196 OUNCE KIThttps://www.ebay.com/itm/22262532906896 OUNCE KIThttps://www.ebay.com/itm/2226253382301.5 GALLON KIThttps://www.ebay.com/itm/222626972426 EPOXY RESIN MIXING AND USAGE APPLICATIONSThe use of a weighing scale is highly recommended for proportioning the 2:1 mix ratio. Resin systems used for direct food contact must yield absolute cure to ensure no chemical leaching can occur when the cured coating comes in contact with the foodstuff. Improper or poor mix ratio accuracy from using volumetric measurement may cause inaccuracy which may cause uncured components to leach from the applied coating. Use a digital scale to precisely weigh the resin and curing agent and ensure full polymerization of the resin and curing agent and prevent leaching.Purchase this scale with any of our product offering and the shipping cost of the scale is free.https://www.ebay.com/itm/222630300203 Ensuring A Uniform Mixture To Prevent Chemical LeachingPlease View The Following Video For The Proper Mixing Of Epoxy Resins. It Demonstrates The Proper Technique Of Mixing Any Type Of Epoxy Resin. The Proper Cure And Final Performance Of Any Epoxy Resin System Are Highly Dependent On The Quality And Thoroughness Of The Mix. The Resin And Curing Agent Must Be Mixed To Homogeneous Consistency. How To Mix Epoxy Resin For Food Contact Coating. Avoid Tacky Spots, Minimize Air Bubble When Mixing - YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] MAX EPOXY COLORANT KIT5 COLORS IN ONE KIT- 2 OUNCES PER COLORSpecial effects pigments such as glitter, pearlescent powder pigment, color refracting pigments can also be added to create a multitude of color effects. Pearlescent Silver Mica Powder https://www.ebay.com/itm/311948312839 Pearlescent Gold Mica Powderhttps://www.ebay.com/itm/222646250679 MAX EPOXY RESIN ART ON GLASS MAX EPOXY RESIN ART ON CANVASClick To View Video DemonstrationPLEASE CHECK OUT OTHER AVAILABLERESIN SYSTEMS AT OUR eBay STOREFor our complete listing, please Visit our eBay store!DON'T FORGET OUR EPOXY MIXING KITClick The Link To Add To Order https://www.ebay.com/itm/222623932456EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system. The container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system. The container must withstand the tenacity of the chemical and must be free of contamination. Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature. MIXING KIT CONTENTS 1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams 4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix Cups5 Pairs One Size Fits All Powder-Free Latex Gloves 2 Each Graduated SyringesWooden Stir SticksFoam Brush IMPORTANT NOTICEYour purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.
Price: 44.17 USD
Location: Ontario, California
End Time: 2024-08-27T01:48:44.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: MAX EPOXY RESIN SYSTEMS
Warranty: 90 Day
Manufacturer Part Number: MAX CLR A/B 48 Ounce Kit
LED EPOXY RESIN TABLE CASTING: FILL VOIDS, TABLE POURS, EMBEDDING
Country/Region of Manufacture: United States
Modified Item: No
California Prop 65 Warning: IMPORTANT USAGE INFORMATION POSTED ON THE DESCRIPTION PAGE ----------------------------------------------------------------------------- ●●●EPA SARA Title III Section 313 above ‘de minimus’ level: None ●●● ●●●US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65): None ●●● - ●●●US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65): This product does not contain any chemicals known to the State of California to cause cancer. ●●● - ●●●All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements under 40 CFR 720.30●●● - ●●●For more information go to https://www.p65warnings.ca.gov/●●●
