Crestron PRO3 3-Series Advanced Control Processor

Description: The flagship 3-Series control processor, offering immense power, expanded memory, an enhanced color LCD front panel, numerous integrated control ports and three control card expansion slots. Features an isolated control subnet providing a Gigabit Ethernet LAN dedicated for Crestron devices. Key FeaturesEnterprise-class control system3-Series® Control Engine — substantially faster and more powerful than other control systemsExclusive modular programming architectureOnboard 1GB RAM & 4GB Flash memoryExpandable storage up to 1TBRear panel memory card slotHigh-speed USB 2.0 host portIndustry-standard Ethernet and Cresnet® wired communicationsControl Subnet — provides a dedicated local network for Crestron® devicesXPanel with Smart Graphics™ computer and web based controliPhone®, iPad®, and Android™ control app supportCrestron Fusion® Cloud Enterprise Management Service supportSNMP remote management supportTwo RS-232/422/485 COM ports with hardware and software handshakingFour RS-232 COM ports with software handshaking onlyEight IR/serial, eight relay, and eight Versiport I/O portsThree built-in 3-Series control card expansion slotsProgrammable event scheduling with astronomical time clockNative BACnet™/IP support [2]IEC 61000-4-5 Installation Class 4 surge immunity on COM, Versiport, and network connections [3]Installer setup via front panel, Crestron Toolbox™ software, or web browserC#, symbol based, and drag-and-drop programming environmentsFull Unicode (multi-language) supportIncreased network throughput and securitySecure access through full user/group management or Active Directory integrationHardware level security using 802.1X authenticationTLS, SSL, SSH, and SFTP network security protocolsFIPS 140-2 compliant encryptionIIS v.6.0 Web ServerIPv6 readyFront panel color LCD display for setup and diagnosticsFront panel USB computer console port2-space rack-mountable Control Engine Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programsMemory SDRAM1 GB Flash4 GB Memory CardSupports SD and SDHC cards up to 32 GB External StorageSupports USB mass storage devices up to 1 TBCommunications Ethernet10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client Control Subnet10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode CresnetCresnet master mode USBSupports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port RS-232/422/485For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485 IR/SerialSupports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baudConnectors & Card Slots S1 – S3(3) 3-Series control card expansion slots COM 1 – 2(2) 5-pin 3.5 mm detachable terminal blocks;Bidirectional RS-232/422/485 ports [3];Up to 115.2k baud; hardware and software handshaking support COM 3 – 6(4) 3-pin 3.5 mm detachable terminal blocks;Bidirectional RS-232 ports [3];Up to 115.2k baud; software handshaking support IR - SERIAL OUTPUT 1 – 8(2) 8-pin 3.5 mm detachable terminal blocks;Comprises (8) IR/Serial output ports;IR output up to 1.2 MHz;1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud RELAY OUTPUT 1 – 8(2) 8-pin 3.5 mm detachable terminal blocks;Comprises (8) normally open, isolated relays;Rated 1 Amp, 30 Volts AC/DC;MOV arc suppression across contacts LAN(1) 8-pin RJ45 jack;10Base-T/100Base-TX/1000Base-T Ethernet port [3];Connects to the customer's LAN CONTROL SUBNET(1) 8-pin RJ45 jack;10Base-T/100Base-TX/1000Base-T Ethernet port [3];Provides a dedicated local network for Crestron devices USB(1) USB Type A female;USB 2.0 port for storage devices MEMORY(1) SD memory card slot;Accepts one SD or SDHC card up to 32 GB for memory expansion I/O 1 – 8(1) 9-pin 3.5 mm detachable terminal block;Comprises (8) "Versiport" digital input/output or analog input ports (referenced to GND) [3];Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;Digital Output: 250 mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads;Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled;Programmable 5 Volts, 2k Ohms pull-up resistor per pin NET(1) 4-pin 3.5 mm detachable terminal block;Cresnet master port, outputs power to Cresnet devices [3];See "Power" section for additional specifications 100-240V~2.4A 50/60Hz(1) IEC 60320 C14 main power inlet;Mates with removable power cord, included G(1) 6-32 screw;Chassis ground lug COMPUTER (front)(1) USB Type B female;USB 2.0 computer console port (6 ft cable included);For setup onlyLCD Display Display TypeTFT active matrix color LCD Size2.8 inch (72 mm) diagonal Resolution320 x 240 pixels FunctionsDisplays configuration menus, control port activity, and other system informationControls & Indicators PWR(1) Green LED, indicates operating power supplied from AC line NET(1) Amber LED, indicates communication with the Cresnet system MSG(1) Red LED, indicates control system has generated an error message HW-R(1) Recessed pushbutton for hardware reset SW-R(1) Recessed pushbutton for software reset CNPS FAULT(1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication SLOT 1 – 3(3) Green LEDs, indicate control cards are inserted in the corresponding slots Nav Pad(1) 5-way navigation pad for menu navigation and parameter adjustment HOME(1) Pushbutton, returns to the home menu BACK(1) Pushbutton, steps menu back one level LAN (rear)(2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity CONTROL SUBNET (rear)(2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activityPower Main Power2.4 Amps @ 100-240 Volts AC, 50/60 Hz Available Cresnet Power75 Watts (3.125 Amps @ 24 Volts DC)Environmental Temperature41° to 113° F (5° to 45° C) Humidity10% to 90% RH (non-condensing) Heat Dissipation45 BTU/hr with no Cresnet devices, no control cards;71 BTU/hr with full Cresnet load, no control cards;See individual control card spec sheets for additional specificationsEnclosure ChassisMetal, black finish, vented top and sides FaceplateExtruded metal, black finish, polycarbonate label overlay MountingFreestanding or 2 RU 19-inch rack-mountable (adhesive feet and rack ears included)Dimensions Height3.47 in (89 mm) without feet Width17.28 in (439 mm), 19.00 in (483 mm) with rack ears Depth10.13 in (258 mm)Weight 5.0 lb (2.3 kg)Item(s) sold separately.License required. The PRO3 supports a maximum of 2000 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.The following connections comply with IEC 61000-4-5 Installation Class 4 surge immunity levels: COM 1 - 6, I/O 1 - 8, NET, LAN, and CONTROL SUBNET.

Price: 459.99 USD

Location: Williston, Vermont

End Time: 2024-11-19T18:38:22.000Z

Shipping Cost: N/A USD