Description: The most important part to building the Tonka Winnebago into an RC is the chassis that your components attach to. ECB 3D Printing has done the math and hard part and designed a modular system that allows you to add what you need and not pay for what you do not. Front Leaf Spring Chassis is designed for 1/14 axles. An easy way to get your steering set up with an integrated servo mount. This unit will need 3x m3 locknuts to attach to the metal floor of the Winnebago. The chassis is designed to use the 1/14 leaf springs that measure approximately 104mm eye to eye. * Tech tip 1 : when building this up you may run into different length springs. When this chassis unit is assembled, if the wheels do not line up central to the wheel wells on the body you can slot the small holes in the metal body and this will allow you to slide this unit front or back to become central in the wheel wells. * Tech Tip 2 : to get the proper height for the front you can add or subtract leaf springs or for small increments you can add or subtract washers or spacers between the chassis unit and the Winnebago body. Only the Printed parts come in these units (2 stops and battery strap comes with the electronics tray). The screws and metal parts are not included. All parts come in black and you can easily paint them to match your RV. For more options please visit our new website www.ecb3dprinting.com or follow us on Facebook "ECB 3D Printing 2.0" and Instagram "ECB 3D Printing" or YouTube "The Budki".
Price: 24.98 USD
Location: Hamburg, New York
End Time: 2024-11-19T16:36:28.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: ECB 3D Printing
MPN: ECB218
