Description: Product Description:New Arrival ➯ This electric longboard skateboard control system has an EMP control module with a remote module, it can do whatever as ESC does, ESC would be easy to damage, this control module would be more stable and cheaper. ➯ Made of high-quality chip and electronic components, dual-drive design can offer excellent and stable performance. ➯ The solid structure of the mainboard can greatly lengthen the service life. With a remote receiver module, so it supports remote control. The well-organized circuit board is easy to install but needs professional skills. ➯ It comes with a portable controller, it has an ergonomic shape, very comfortable to hold and use. 4 different speed modes: high-speed sport mode, high-speed economy mode, middle-speed mode, low-speed mode. ➯ With an LED indicator that displays signal status, speed modes, battery percentage. Features: ➤ Application areas: scooters, wheelbarrows, torsion cars, balance cars and so on. ➤ The upgrade dual-motor drive ESC is a double layer board and much better than other ESC. ➤ Wireless 2.4G remote control transmission to control. (The maximum distance can reach 20 meters.) ➤ Also, have single/dual motor drive ESC for hub motor ➤ Support 5055/5065/6354/6374/6384 belt motor ➤ Protection: Overvoltage, Undervoltage, Overtemperature, Stall, CW/CCW, Overcurrent, Speed Control. Specification: Rated Voltage: 36V Current: 12A Rotate speed: 4200RPM Drive mode: Dual Motor Drive Max. speed: 35KM/H Power: 430W(36V) Weight: about 250g/8.82 ounce Max. Loaded: 120kg/264.55 lbs Remote distance: 20m/65.62ft (Max.) Sensing method:: Hall Power connector: XT60 plug Hall interface: 5pin 2.0 connector Motor plug: 4mm Banana Size: approx. 18.5 x 10 x 5cm/7.28 x 3.94 x 1.97 inch Installations: 1: Connect the main control to the power supply. 2: The power is turned on, wait for two seconds, then press and hold the key for about 6 seconds. Wait until the switch indicator flashes. 3: Turn on the remote control switch and use a small screwdriver to press the button inside the small hole in the lower-left corner of the remote control. 4: The remote control is turned off for two seconds and then turned on. Wait for the remote control signal light and the switch signal light to flash at the same time to indicate that the match is successful. Package includes: 1x ESC Substitute Control 1x USB to Micro-USB Cable 1x LED Battery Indicator 1x 2.4G Remote Control Transmitter 1x Switch NOTE: 1. No Installation Guides are included, professional usage is strongly recommended. 2. The driver board is a high-precision circuit board. Do not touch the metal object/liquid to the board before and during use to avoid internal short circuits! 3. 24v ESC must use a voltage above 24v, the maximum voltage can be used is 29.4v (the ESC wont work below 24v). 4. 36v ESC must use a voltage above 36v, the maximum voltage can be used is 48v (the ESC wont work below 36v). Tips:Please allow minor deviation due to manual measurement.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Shipping:Shipping Estimated Delivery Time*Economy(without tracking): 11-35 business days*SpeedPAK(with tracking): 8-12 business days*EMS/DHL(with tracking): 7-10 business days, need to pay extra shipping costFor faraway region or countries (Brazil, Mexico, Peru, etc), the transit time may be longer than Overall Transit Time Frame.Notes, the delivery time may vary due to public holidays, natural disasters, customs issue and other unexpected impact, etc.Customs Declaration: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to biddingying. Payment:We accept PayPal ONLY currently. Payment must be made within 4 business days. If you do not have Paypal account, please register at (www.paypal.com).Return & Refund:Returns are accepted within 30 days.Please read the item description and check the pictures carefully before bidding. Return or refund is available only if item DOA or theres error in item descriptioncausing the item not fitting your need. In such cases, seller pays for all related shipping cost if any.Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost.Feedback:As long as you are satisfied with your purchase, please kindly leave us a 5 stars Positive Feedback, as it is very important for our store performance.If there is any problem with your order, please contact us and give us a chance to resolve your problem Before leaving us a negative feedback.
Price: 54.14 USD
Location: China
End Time: 2024-01-22T02:43:37.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Package 4: 1x 2.4G Remote Control Transmitter
Remote frequency: 2.4ghz
Wireless 2.4G remote control: The maximum distance can reach 20 meters
Size: 7.28 x 3.94 x 1.97 inch
MPN: Does Not Apply
Drive mode: Dual Motor Drive
Max. speed: 35KM/H
Max. Loaded: 120kg/264.55 lbs
Sensing method: Hall
UPC: Does not apply
Current: 12A
Custom Bundle: No
Rated Voltage: 36V
Rotate speed: 4200RPM
upgrade dual-motor drive ESC: a double layer board and much better than other ESC
Support Motor: 5055/5065/6354/6374/6384
Package 2: 1x USB to Micro-USB Cable
Remote distance: 20m/65.62ft (Max.)
Package 5: 1x Switch
Motor plug: 4mm Banana
Package 3: 1x LED Battery Indicator
Power connector: XT60 plug
Power: 430W(36V)
Application areas: scooters, wheelbarrows, torsion cars, balance cars and so on
Package 1: 1x ESC Substitute Control
Hall interface: 5pin 2.0 connector
Weight: about 250g/8.82 ounce
Brand: Unbranded
Country/Region of Manufacture: China
Modified Item: Yes