Description: Epistar LED 3 Watt Universal Bulb FOR Makita 18V Tool Lights Non-Polarity Use this 250 LUMEN LED PR Bulb to upgrade standard P13.5S bulb lights.NOTE: Universal Polarity is important because Makita changes the polarity of their tool lights often...!---- Using the wrong polarity LED in your tool light can burn out your light or LED or both. ----- ---- This LED is not for Makita ML700 or DML-185 light, Please See *** ML700 and DML-185 *** Brilliant 320 Lumen XPG3 LED https://www.ebay.com/itm/233583806527 *Please note, LED bulb will be bright but not as bright as highest power Krypton, or Xenon incandescent bulb over 10 watts when battery is fully charged we sell those to. XPR18 Incandescent bulb is 326 Lumen at 22.0V Volts 0.65A (fully Charged battery) Only 15 Hour Life! Also only 179 Lumen at 18.0V Volts 0.59A (lower charged battery) We also have: Cree LED 5 Watt XPG2 Universal Bulb FOR Makita 18V Tool Lights Non-Polarity https://www.ebay.com/itm/233245052971 for superior brightness, efficiency, and longevity for Less --- LED UPGRADE For the FollowingRechargeable Work lights and Replacement Bulbs:Work Light Upgrade For:Bulbs Upgrade For:Makita ML140 DL180DML185WBML185DML 185XLT 14.4V or18VMakitaA-90233A-9026114.4V 18v Makita is a registered trademark Makita USA, Inc.. Draco Products is not affiliated with Makita USA, Inc.. Simply replace your existing bulb with this LED – no modifications necessary!*Please note, LED bulb will be bright but not as bright as highest power Krypton or Xenon bulb over 10 watts. Universal Voltage Works with standard flashlights and Work Lights 9 Volt to 30 VoltsUniversal Polarity with Polarity (+) or (-) on bottom contact or Flange ! Minimizes battery and bulb replacement waste Focusability of flashlight is preserved with these point source LEDs Brighter Light for improved vision for enhanced visibility of fine detail Longer battery life from high efficiency LED Long lamp life 50,000 hours of continuous use Dependable and shock resistant Easy To Install Features: INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times. FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance. MAXIMUM EFFICIENCY These LEDs are powered below their maximum rating for longer life and higher lumens per watt of battery power. LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light. INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours. EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary Standard PR Incandescent vs. LED See the difference! 1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage. 2) Warning! - For safety always follow manufactures safety and operational instructions. 3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb. * The perfect bulb (High Brightness and Longer Battery life run time). Upgrade / Replacement for standard Work Light applications that take a flange base light bulb for 9-30 Volt battery operated products (Zink, Alkaline, lithium, NiCad). *EPISTAR is a trademark of EPISTAR Corporation*CREE is a trademark of Cree, Inc.* Draco Products is not affiliated with Epistar Corporation or Cree, Inc. ☛ · Buy two now and save with discounted shipping, the right bulb is hard to find, why not get two? This is a very popular style of bulb for Many Work Lights, flash lights, and work lightsUniversal Polarity LED with bottom contact Positive or Negative! *Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list so purchaser is responsible for compatibility with their actual product. The Lamp has a STANDARD 'PR' Base - P13.5s is International standard flanged base, 9.2mm Diameter, with flange "V" notch ★ Thank You. Please return a positive review for good service, Thank You.© 2015-2020 Draco Products. All Rights Reserved
Price: 12.95 USD
Location: Jacksonville, Florida
End Time: 2024-01-02T11:20:39.000Z
Shipping Cost: 4.23 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
California Prop 65 Warning: WARNING: This product can expose you to chemicals, including lead, which is known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
Power Source: Battery
Type: Work Light LED
Model: 3-Watt
Lumens: 250 Lumen
Features: Replacement For:192546-1 A-90261 A-90233, Handheld, For: ML140, DL180 DML185W BML185 DML185XLT
Lighting Technology: LED
MPN: PR-1W-30VAC-9
Brand: Draco Products
Voltage: 14.4 or 18 Volt
Style: p13.5s Flange Base
