FAMAG 1622 Bormax, Der Rasante Forstner Bit, Ø = 50 MM

Description: To the shop: Wuppertools Ebay chargesI pay Ebay fees! Also watch out for my other auctions and save on postage! Important The picture shows one or more example articles from this article group. Unless otherwise noted, an article is offered at a time. If in doubt, ask us. Thanks very much. shipping The dispatch usually takes place within two days after receipt of payment! The shipping and packaging costs are always kept as inexpensive as possible! Collection in Wuppertal is also possible! Quality products from Wuppertools for demanding professionals. Order number: FAMAG1622.050 (example image)Outside diameter AØ, mm: 50Shank diameter SØ, mm: 10Total length GL, mm: 90Usable length NL, mm: 57 FAMAG 1622 Bormax®, the fast Forstner drill, Ø = 50 mmManufacturer number: FAMAG 1622.050Rapid Forstner bit with center point, 2 main cutting edges and serrated peripheral cutting edge in wave form.Cylindrical shank with three clamping surfaces from Ø 15 mm. A Bormax even after regrinding!Quality level: PremiumExecution: Rapid Forstner bit with center point, 2 main cutting edges and serrated peripheral cutting edge in wave form. Cylindrical shank with three clamping surfaces from Ø 15 mm. A Bormax even after regrinding!Tool material: Alloy tool steelRecommended speed: 900 - 3200 rpm. e.g. Ø 35 mm 1500 min-1 in laminated beams.Use: Rapid drilling in softwood, European hardwood, chipboard, MDF panels, etc. Very rapid machining of solid wood and chipboard with significantly lower feed forces and significantly faster drilling than with conventional Forstner bitsTips, special features: Top in hands-free and stationary use. Due to the very low heat development, an unbelievably long service life with the highest drilling quality The picture shows one or more example articles from this article group. Unless otherwise noted, an article is offered at a time. If in doubt, ask us. Thanks very much. Execution: Rapid Forstner bit with center point, 2 main cutting edges and serrated peripheral cutting edge in wave form. Cylindrical shank with three clamping surfaces from Ø 15 mm. A Bormax even after regrinding! Recommended speed: 900 - 3200 rpm. e.g. Ø 35 mm 1500 min-1 in laminated beams. Use: Rapid drilling in softwood, European hardwood, chipboard, MDF panels, etc. Very rapid machining of solid wood and chipboard with significantly lower feed forces and significantly faster drilling than with conventional Forstner bits Tips, special features: Top in hands-free and stationary use. Due to the very low heat development, a

Price: 115.73 CAD

Location: Wuppertal

End Time: 2024-03-08T03:48:37.000Z

Shipping Cost: 16.23 CAD