Eppendorf

Famag 1624.509 Bormax 2.0 Ws First, 9-teiliger Set IN Wooden Box, 15 To 50 MM

Description: To the shop: Wuppertools Ebay chargesI pay Ebay fees! Check out my other auctions and save on postage! Important The image shows one or more sample items from this item group. Unless otherwise noted, one item is offered at a time. If in doubt, ask us. Many Thanks. shipment Shipping usually takes place within two days after receipt of payment! Shipping and packaging costs are always kept as low as possible! Collection in Wuppertal is also possible! Enlarge image Quality products from Wuppertools for demanding professionals. Order number: FAMAG1624.504 (example picture of set 16254.505)The problem: If the carpenter drills railing holes in the stair stringer when building the stairs, he must drill into the stringer surface at an angle other than 90°. Since conventional cylinder head drills have a center point that is too short, they are not suitable for this application. Traditional stair construction drills have a long centering tip for precisely this reason. However, this center point is usually designed in such a way that it has no cutting effect (since it has no cutting edges) and therefore has to be pressed into the wood while the drill is running. This is particularly unfavorable for hardwood. But stair stringers and handrails are usually made of hardwood..... Furthermore, these tools are relatively expensive and very difficult to regrind. The solution: The all-rounder is called Staketen-Bormax®! This all-rounder is always supplied with a pilot drill, center point and a long Allen key. You are probably already familiar with the geometry of this new railing drill: Exactly, Bormax®! From a diameter of 25 mm double-edged, smaller than 25 mm with a main cutting edge and a peripheral cutting edge. In the center of this stocking Bormax® you will find a 4.0 mm hole in which either the center point or the center drill can be used. The centering tip is designed as a triangle, which guides the Bormax® particularly well when drilling but generates little friction. A small clamping surface is attached for a firm seat in the stocking Bormax®. The center drill also has a clamping surface and a total length of 40 mm. Mounted in the stocking Bormax®, the center drill sticks out a good 20 mm from the Bormax®. If this length is not sufficient for you, you can also use a commercially available 4 mm drill bit. With the centering point used, this all-rounder machines softwood, MDF boards, chipboard and European hardwood just as reliably as its traditional brother (Series 1622). If you would like to drill into the wood at an angle, simply exchange the centering point for the enclosed centering drill. FAMAG 1624.504 Bormax® 2.0 WS great, set in a wooden box, 4 pieces, Ø 15, 20, 25, 30, 35, 40, 45, 50mmManufacturer number: FAMAG1624.509in the scope of delivery is included - one each stockade Bormax®, - one mounted center point each, - a pre-drill Ø 4 mm and - an Allen keyDrill with straight shank and three clamping surfaces.quality level: PremiumExecution: Bormax with replaceable center point or pilot drill. The scope of delivery includes a Bormax stake, a matching center point, a Ø 4 mm pre-drill and an Allen keyMaterial of the tools: Alloyed tool steel, pre-drill HSS-GSpeed ​​recommendation: 1500 - 3000 rpm. eg Ø 20 mm 2400 min-1 in softwood.Use: With pilot drill, ideal for drilling at an angle of less than 90° to the material surface, as is the case, for example, in stair construction. Can be used with a center like the traditional BormaxTips, special features: Clean drilling at many angles in all softwoods, European hardwoods, chipboard and MDF boards. Very good alternative to the expensive stair construction drill 1575Contents: Pallet Bormax®, 4-piece set in a wooden box. Ø 15, 20, 25, 30, 35, 40, 45, 50mm Traditional stair construction drills have a long centering tip for precisely this reason. However, this center point is usually designed in such a way that it has no cutting effect (since it has no cutting edges) and therefore has to be pressed into the wood while the drill is running. This is particularly unfavorable for hardwood. But stair stringers and handrails are usually made of hardwood..... From a diameter of 25 mm double-edged, smaller than 25 mm with a main cutting edge and a peripheral cutting edge. In the center of this stocking Bormax® you will find a 4.0 mm hole in which either the center point or the center drill can be used. The centering tip is designed as a triangle, which guides the Bormax® particularly well when drilling but generates little friction. A small clamping

Price: 459.08 CAD

Location: Wuppertal

End Time: 2023-12-17T00:33:41.000Z

Shipping Cost: 15.82 CAD

Product Images

Famag 1624.509 Bormax 2.0 Ws First, 9-teiliger Set IN Wooden Box, 15 To 50 MM

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 60 Days

Brand: FAMAG

Tool Type: Forstner Bit

Manufacturer: FAMAG

Modified Article: No

Werk Fabric: Wood work

MPN: 1624.509

Country/Region of Manufacture: Germany

Product Type: Forstner bit Set

Recommended

Famag IM-15 Spiral Dough Mixer, 20 quarts
Famag IM-15 Spiral Dough Mixer, 20 quarts

$2939.00

View Details
FAMAG Germany Wooden Handled Hand Countersink Tool
FAMAG Germany Wooden Handled Hand Countersink Tool

$15.00

View Details
ALFA FBM64017 1-5/16" FAMAG 1622.2 Bormax 2.0 Forstner Bit  (1622.230)
ALFA FBM64017 1-5/16" FAMAG 1622.2 Bormax 2.0 Forstner Bit (1622.230)

$26.25

View Details
famag super-forstner bit 2 1/4" german made
famag super-forstner bit 2 1/4" german made

$21.28

View Details
Famag Spiral Mixer IM20 HH (20KG) High Hydration Spiral Mixer with Reverse
Famag Spiral Mixer IM20 HH (20KG) High Hydration Spiral Mixer with Reverse

$2966.06

View Details
Famag Bormax Forstner Bit - 1-3/8"
Famag Bormax Forstner Bit - 1-3/8"

$43.99

View Details
130mm Forstner Extension for 10mm Shank Bits
130mm Forstner Extension for 10mm Shank Bits

$52.34

View Details
Famag IM-50 Spiral Dough Mixer
Famag IM-50 Spiral Dough Mixer

$4900.00

View Details
ALFA FBM64027 - 2-1/8" FAMAG 1622.2 Bormax 2.0 Forstner Bit (1622.243)
ALFA FBM64027 - 2-1/8" FAMAG 1622.2 Bormax 2.0 Forstner Bit (1622.243)

$39.25

View Details
Alfa Tools FB61454 1/2" CV Famag Forstner Bit
Alfa Tools FB61454 1/2" CV Famag Forstner Bit

$14.90

View Details