Description: Refurbished and tested complete Fanuc 120Ib RJ3iB with Lincoln 455 and Lincoln Power Feed 10 R feeder with Tregaskiss CA3 torch.. it’s got the a05b-2301-c372 pendant and the cables as well. Its got everything you need short of power and the wire spool ( and I can tell you where to get that too) to get welding. This robot was bought and refurbished for our own use. Currently set up for mig welding steel This machine was our baby. I personally did the maintenance as per Fanuc’s guidelines and when in question we replaced the part outright to ensure minimal issues. It may be an older model but this in excellent functional condition and i doubt you will find a better used machine If you don’t know how to operate, power or master it, I suggest you get on youtube. RJ3iB cabinet The rj3ib cabinet is a 3kva 3 phase 480/ 570 type 1 but don’t let that stop you.. a new Madox 3kva autotransformer is $380.00.. We utilized a 11 kva to power all 3 machines. The electrical sections of cabinet was cleaned, and blown out, then all the electrical components sprayed down with about 4 cans CRC contact cleaner , brushed with 1 inch brush and then sprayed down again with CRC 303 corrosion coat and then compressor blow clean. I even did the wires. The batteries were changed on main board Transformer was checked and blown out and cleaned in same process as above. Lincoln Power Wave 455 M Transformer configurable to pretty much any 3 phase voltage you have from 200-575. We took this sucker apart and cleaned the hell out of it, then put it back together. cleaned all all the connections on front side as well. Runs stable and consistently both in pulse mode and conventional and put out good welds once you choose correct weld schedule We linked it to computer to test and check settings. It’s all good and you can verify that by checking out computer screenshot I got of the specs. Feeder has got.045 rollers in it. Lincoln Power Feed Feeder has got.045 rollers in it and was serviced and cleaned. Arcmate 120iB robot Was in very good condition when I originally got it as if bought it semi-refurbished to begin with. Basic maintenance completed as per Fanuc, but there were couple nagging items that I fixed I changed the J2 motor as it had a small amount of droop once you released the Deadman. All grease was changed with Vigogrease and has about 2 hours on it and motors checked. The exterior was cleaned with purple degreaser and then washed completely and then sprayed with CRC 303 corrosion coat I remastered can, checked all parameters and then we started bench testing it and using it in shop Tregaskiss CA3 torch We cleaned it up and made sure sacrificial disc was good and put new head, tip and nozzle on it Other Info It also comes with steel rack that holds both the controller cabinets and welder, which is pretty useful. I have it all backed up with image as well. Additionally we have and can supply both the pcmcia card for robot and the interface cable for the welder, so you can hook it to laptop. Lastly we have the older software and instructions on how to set it up. Please contact us if you have any questions concerning this item before bidding. We have tons of pictures(97 to be exact). The machine is older unit and it not as pretty as a 120iC or iD but it runs and welds incredibly well and its not 100K. We have made some videos of it in use and also test videos on this exact machine.. https://youtu.be/Kj5ZcI7Mx3k https://youtu.be/BGu5CPBA98o https://youtu.be/Ljd4_YLp2WI https://youtube.com/shorts/WIM51VrJK-E?feature=share If local you are free to come by and see it. Return Policy: The buyer must contact us within the specified warranty-period to arrange an exchange (if available) or return/refund. Returns are only accepted for warrantied items that are D.O.A. and cost of shipping and insurance is buyer’s responsibility. Returned items must be returned in the same condition received (no signs of abuse, misapplied power, disassembled etc.). Packaging/Handling/Shipping: All items are skid loaded. if crating required, we may charge an and additional handling fee. We do not ship outside of the United States or Canada. Buyers must contact us to make arrangements for items requiring LTL shipment. Tig Mig Metal Fabrication
Price: 16000 USD
Location: Farmingdale, New York
End Time: 2024-07-31T18:24:20.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: FANUC
Type: Robotic Arm Assembly
Arm Reach: 1667 mm
Custom Bundle: No
Model: 120iB with Rj3iB
Payload: 20 Kg
MPN: 120iB with Rj3iB
Robotics Controls Type: Arm
Construction Type: Arc Welding
Modified Item: No