Fits F-150 2015 2016 2017 Rear Tailgate Applique NEW Contains FDOR letter（Grey）

Description: Note: Raptor not applicable！only for F150 models.Technical Note: Removal OE Emblem before installing 1.Material: Made of high-quality ABS plastic. 2.Features: The new raptor-type tailgate Panel set is designed to fit for truck’s tailgate. It is lightweight, superior durability. It adds luster to your vehicle and also brings you a better experience when driving. 3.Easy to install: It will not take you more time, Just need about 20 minutes to stick. 4.After-Service: When missing accessories or damaged, please send a message to our customer service to arrange to resend a new one or resend the missing part. 5.Raptor panel set for rear door car exterior accessories suit for F150 2015-2017. 6.Note: It is normal for the tailgate to have a slight curvature. The package contains 3M glue and strong glue. It is recommended to first coat the back of the tailgate with strong glue, and then use 3M glue to bond together. After pasting, use tape or rope Fix it, it is best to use it after 24 hours, so as to ensure that the tailgate panel is in the strongest state. Technical Note: Tailgate panels designed have been testing fit, refined, and tested again on our own fleet of vehicles to ensure a perfect fit. Fits all 2015-2017 F150s Excluding Raptor without factory tailgate applique. It is a high-quality replacement back door panel for your car. Please read the instructions of the products carefully to avoid installation errors. This Tailgate Applique is made to directly fit your tailgate with no modifications needed. First, warm up the mounting surfaces to about 60 degrees Fahrenheit as the adhesive works best on warmer surfaces. You can accomplish this with a hairdryer or heat gun. Technical Note: Removal OE Emblem before installing， and clean the surface.1. Tailgate panels designed have been tested fit, refined, and tested again on our own fleet of vehicles to ensure a perfect fit.2. Fits all 2015-2017 F150s Excluding Raptor without factory tailgate applique.3. It is a high-quality replacement back door panel for your car. Please read the instructions for the products carefully to avoid installation errors.1. Apply the adhesion promoter to the edge of the tailgate panel.2. Paste the 3M glue along the position where the adhesion promoter has been applied.3. Apply super glue in the middle area, it is recommended to squeeze into creamy, slightly thicker.4. Tear off the 3M glue skin and apply another layer of adhesion promoter at the same time.Best if you have a hair dryer or heat gun at home, as the adhesive works better on warm surfaces, heat the mounting surface to about 60 degrees Fahrenheit for installation.Note: It is normal for the tailgate panel to have a slight curvature. The package contains 3M glue and strong glue. It is recommended to fix it with tape or rope after pasting, it is best to use it after 24 hours, so as to ensure that the tailgate panel is in the strongest state.

Price: 189.99 USD

Location: Englewood, New Jersey

End Time: 2024-11-22T05:51:33.000Z

Shipping Cost: 0 USD