Fluke Networks LIQ-KIT-87-5 Electrical and Network Troubleshooter Kit

Description: Subscribe to Our NewsletterFluke Networks LIQ-KIT-87-5 LinkIQ Electrical and Network Troubleshooter Kit Brand:FlukeModel No:LIQ-KIT-87-5Ref No:5584197Our Model No:LIQKIT875 Product OverviewFeaturesMeasure Volts, Amps, Ohms and Temperature in even the most hostile environmentsFind maximum cabling speed (Up to 10 Gb/s) Install and troubleshoot PoE devices via Switch Negotiation and PoE Load TestIdentify connected switch information (Switch Name, Port Number, and VLAN)Document work through LinkWare PCGenerate analog or digital tones compatible with IntelliTone Probe (included) or Pro3000 (not included) to assist in locating cables in wall or telecommunications roomBlink Port light on switch to help identify connected switch portCompatible with MicroScanner PoE Remote Identifiers for Ethernet outlet identificationTouch sensitive gesture-based displayRechargeable Li-Ion batteryEasy Feature and Network Testing Upgrades via USB-C via LinkWare PCCharging via standard USB-C portBattery type: Lithium-ion, 3.6 V, 6400 mAhBattery life: 8 hours typicalBattery charge time: 4.5 hoursBattery charging temperature range: 0 °C to +40 °CPower adapter input: 100 to 240 VAC ±10%, 50/60HzPower adapter output: 15 VDC, 2 A maximum; Class IIHost interface: USB type CDisplay: 800 x 480 color capacitive multi-touchOperating temperature: 0°C to 45°CStorage temperature: -20°C to 50°C (-4°F to 122°F)Operating relative humidity: 0 % to 90 %, 0°C to 35°C; 0 % to 70 %, 35°C to 45°COperating altitude: 4,000 m; 3,200 m with ac adapterVibration: Random, 2 g, 5 Hz-500 HzDrop: 1 m drop, 6 sidesDiagnostic protocols: Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), Fast Link Pulses (FLP)Nearest device diagnostics (if available through diagnostic protocols): Switch Name, Port Number, VLAN Name, Advertised Data Rates, Advertised DuplexPower Over Ethernet (PoE) compatibility: IEEE 802.3af/at/bt, Hardware negotiation with signature resistance, Software negotiation with LLDP/CDPPower Over Ethernet (PoE) diagnostics: Advertised Power Class (0-8), Advertised Available Power, Powered Pairs, Diagnostics for Single and Dual signaturesPower Over Ethernet (PoE) measurements: Loaded Voltage (V), Loaded Power (W)Port blink: Blink light of connected portTest Port: Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugsCommissioning autotests: 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only; test Speed: 6 seconds for lengths Cable types: Balanced twisted-pair cabling; Unshielded twisted-pair; Screened twisted-pair; 2-pair and/or 4-pairWire map-only tests: Document wire map, Length of each pair, Diagnose split pairs, User selectable T568A or T568B, User selectable crossover settings (Straight through, Half-crossover, Full-crossover). Test speed: 1 second for lengths Length (Maximum): 305 m (1000 ft)Nominal velocity of propagation (NVP): User settableTone generator: Generates digital tones compatible with Fluke Networks IntelliTone probe; generates analog tones compatible with general analog probesRemote ID locators: Use remote ID terminations to identify up to 7 unique ports or office outletsDescription The Fluke Networks LIQ-KIT-87-5 Electrical & Network Troubleshooter Kit supports performance testing, tracing and troubleshooting of twisted pair cables, switch and network connectivity and installation and testing of electrical systems. The LIQ-KIT-87-5 is the testing solution to verify cable performance up to 10 Gb/s and solve network connectivity problems. LIQKIT875 Pack validates cable performance using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test. The LIQKIT875 also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include Analog and Digital Toning, Port Blink, 802.1x authentication, Remote Office Locators, and the ability to manage results via LinkWare PC.Included Components1 - LinkIQ Cable+Network Tester1 - Set of Remote IDs #1-71 - RJ45-RJ45 Patch Cord1 - AC Charger1 - RJ45/11 Universal Coupler1 - IntelliTone Pro 200 Probe1 - Duffle Bag Carrying Case1 - Fluke 87V Industrial Multimeter1 - TL75 Test Leads (TL175 Eur)1 - AC175 Alligator Clips1 - Holster with Tilt-Leg/Test Lead Storage1 - 80BK Temperature Probe1 - 9V Battery (installed)1 - C3004IND Duffle CaseTerms & ConditionsPlease note estimated delivery time above. Contact us for details or if you have a delivery requirement. We ask for your patience while striving to ensure your shipment arrives quickly and accurately.Domestic ShippingFREE Standard Shipping on items OVER $75 and less than 30lbs to continental U.S. Add $36 for AK, HI, or PR. Please contact us for shipping rates to any overseas US territories including: Northern Mariana Islands, Guam, Puerto Rico, U.S. Virgin Islands and American Samoa.PO Boxes/APOs require USPS shipping and may therefore experience longer lead times6.25% Sales Tax for shipping to MAInternational ShippingDue to international voltage requirements, please ask us prior to purchasing to confirm your product will operate correctly in your country.Please contact us for shipping rates to any overseas U.S. territories.International customers are responsible for all shipping charges, including any duties or taxes.

Price: 3509.99 USD

Location: Woburn, Massachusetts

End Time: 2024-03-25T18:10:06.000Z

Shipping Cost: 0 USD