For Seastar Hydraulic Steering Cylinder Seal HS5157 + Bracket Puller + Bleed Kit

Description: HOMEPAYMENTSHIPPINGABOUT USCONTACT USStore CategoriesStore CategoriesOther Detail Fitment for: FRONT MOUNT STEERING CYLINDER SEAL KIT Compatible: For HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland)). Fits for front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344 HC5345, HC5346, HC5347, HC5348, HC5358 HC5365, HC5375, HC5394, HC5445, HC6750 HC6751, HC6752, HC6753, HC6754, HC6755 HYDRAULIC STEERING SUPPORT BRACKET PULLER Compatible: Fit for SeaStar and Uflex support brackets, older style compatible with SeaStar Tournament brackets included. Help safety remove compatible with Seastar and Uflue support brackets and minimize damage to the steering brackets during removal process. Teeth design fit to grip the brackets. Applied with 3/4'' wrench or socket to fit the drive bolt. Installation Steps: 1. Loosening the Seal Gland Turn the outboard hard to port; place the pin wrench (supplied in the seal kit) in the holes of a gland, and use a 5/8-inch box wrench on the nut on the port end of the piston rod. Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland. 2. Removing the Support Bracket Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. Do the same to the piston rod nut and washer. Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket. 3. Removing the Old Seal Gland Finish unscrewing the old seal gland. If you can't grip it well with your hand, use the pin wrench. Slide it off the piston rod. 4. Installing the New Seal Gland Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool. (it is not part of the final assembly, but you will need it for the other side.) 5. Reinstalling the Support Bracket Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently. 6. Tightening the New Seal Gland Use the pin wrench to tighten the new seal gland while using a 5/8-inch box wrench on the end of the piston rod for counter torque Package Included: ①Bleed Kit includes 1 x hose with screw cap which fits SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Seastar Bleed fittings. ②1 x Steering Support Bracket Puller, ③HS5157 kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Holder, 8 x varies O-rings. (As pictures showed) Shipping PolicyPayment MethodReturns PolicyShipping PolicyPayment MethodReturns PolicyHOMEPAYMENTSHIPPINGABOUT USCONTACT UScopyright © 2018 datacaciques DetailFitment for: FRONT MOUNT STEERING CYLINDER SEAL KIT Compatible: For HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland)). Fits for front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344 HC5345, HC5346, HC5347, HC5348, HC5358 HC5365, HC5375, HC5394, HC5445, HC6750 HC6751, HC6752, HC6753, HC6754, HC6755 HYDRAULIC STEERING SUPPORT BRACKET PULLER Compatible: Fit for SeaStar and Uflex support brackets, older style compatible with SeaStar Tournament brackets included. Help safety remove compatible with Seastar and Uflue support brackets and minimize damage to the steering brackets during removal process. Teeth design fit to grip the brackets. Applied with 3/4'' wrench or socket to fit the drive bolt. Installation Steps: 1. Loosening the Seal Gland Turn the outboard hard to port; place the pin wrench (supplied in the seal kit) in the holes of a gland, and use a 5/8-inch box wrench on the nut on the port end of the piston rod. Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland. 2. Removing the Support Bracket Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. Do the same to the piston rod nut and washer. Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket. 3. Removing the Old Seal Gland Finish unscrewing the old seal gland. If you can't grip it well with your hand, use the pin wrench. Slide it off the piston rod. 4. Installing the New Seal Gland Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool. (it is not part of the final assembly, but you will need it for the other side.) 5. Reinstalling the Support Bracket Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently. 6. Tightening the New Seal Gland Use the pin wrench to tighten the new seal gland while using a 5/8-inch box wrench on the end of the piston rod for counter torque Package Included: ①Bleed Kit includes 1 x hose with screw cap which fits SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Seastar Bleed fittings. ②1 x Steering Support Bracket Puller, ③HS5157 kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Holder, 8 x varies O-rings. (As pictures showed) ☎ Contact Us?Shipping Policy?Payment Method ?Returns Policy?‍?About us☎ Contact Us If there is any question or problem, please contact us through ebay message. We will try our best to help you. If the item is defective, we will: Repair the product; Replace the product (or part of them); Provide compensation. For claiming the warranty, please contact our customer service team, they will provide you with instructions and help you address the matter as quickly as possible. We are very confident with our product quality and we will offer 90 days warranty on all products if there is no factory warranty.?Shipping Policy 1️⃣ All items are real stocked locally in our warehouse. 2️⃣ We process orders fast with 98% of items dispatched within 24 hours 3️⃣ We ship to your eBay address. Please make sure your eBay address is correct before you pay the order. Providing us with your full name, phone number and detailed address after placing orders please. 4️⃣International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. 5️⃣NOt Received---It is buyer responsible to track packages and ensure safe arrival. If logistics shows delivers but nothing sign for,contact without hestation,will help track the details and wait for investigation. if incorrect address was provided by buyer,we will try to contact carrier but not guarantee replacement. 6️⃣Wrong address---If shows delivered we will try to retrieve package no guarantee. If package is return due to bad address buyer is responsible for shipping charges again. 7️⃣Arrive demaged---Contact us immediately once you receive,and please be kind to offer photos for us to have a check,must offer good solution. 8️⃣Wrong item receive---It is important for you to check if product looks similar to pictures showed on ebay then contact us?Payment Method 1️⃣All payment is accepted 2️⃣Of course, we and the platform must protect your property security from the beginning of placing the order to the successful delivery of the package. 3️⃣If you are making a bank transfer, please leave your exact eBay username as reference. Otherwise, your payment will not be identified and cleared. ?Returns Policy When a return dispute filed, please accept our sincere apology for any inconvenience caused, we shall respect all reasonable refund requests. Please contact us by ebay message if there is any problem. Follow our return policy and fill in the necessary information, otherwise our warehouse may not be able to recognize and receive your return items. Returned products should be in good condition, do not affect second sales, with all the labels and packaging.?‍?About us OUR TEAM The aim of our company is to help and serve Global household and industrial groups, break the monopoly of traditional dealers at high prices and reduce the profits of middlemen. Our products come from 100% of regular brand dealers, ensuring the quality of the genuine products and top quality. Every customer will be satisfied with our products and service and look forward to cooperating with you all.

Price: 55.42 USD

Location: Fontana, California

End Time: 2024-08-20T16:48:26.000Z

Shipping Cost: 0 USD