Description: This is the Ghost Detector Cross - 1 piece. This consists of a sensor that can be used as stand alone "Ghost" Detectors or combined as an array to cover much greater areas. You get a ultra-sensitive EMF Detector that can be used in your Paranormal investigations. You will be amazed at what these devices can detect. With some experimenting, you can discover when and where to place the Ghost Detector for the best results. These are small enough that you can place them almost anywhere. The LED will come on as long as it detects a presence. It can come on briefly or stay lit longer, depending on the electrical fields in the area. You will get 1 built & tested device. The detector will require one 9v Battery; there are no batteries included with this set.For those technical folks (and I'm one) this circuit is a three-stage, un-tuned, wideband, Darlington LED amplifier. There are no pulse-stretching circuits to extend the LED On-time. If there is enough energy present to forward bias the first stage, then all hell will break loose, figuratively speaking, of course. Under right conditions, it can pick up your aura (static electricity) as you walk across your rug. Designed by Nightfire Electronics in Ocala, Fl. USASize is 2X1.5X1 inches.
Price: 12.99 USD
Location: Ocala, Florida
End Time: 2025-01-05T17:36:34.000Z
Shipping Cost: 4.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Handmade: Yes
Country/Region of Manufacture: United States
