Gimbel Belly Pan BMW R 1200 S (R12S) 06-11 With Tüv Unvarnished From Grp

Description: Gimbel, Auto and Motorcycle Technology GmbHKesslerstrasse 7 79206 Breisach Since 1979 - the address for exclusive conversions! Gimbel front spoilerBMW R 1200 S2006 - 2011 (Type: R12S) NEW / OVP 349.00* 299.00* *in EUR incl. VAT description Original gimbel belly pan This spoiler was specially developed for the motorcycle and optically adapted to the design of the motorcycle Makes the bike look complete and more dynamic Effectively protects the engine from stone chips and improves aerodynamics All-round edges increase stability with the lowest weight The front spoiler is made of glass fiber reinforced plastic (GRP) The surface is a layer of gray colored gelcoat GRP is a fiber-plastic composite consisting of synthetic resin and glass fibers GRP has a high elongation at break and high elastic energy absorption Standard side and main stands can still be used The production takes place in our own production completely in Germany The spoiler is made entirely by hand The front spoiler is a blank that is unpainted TÜV parts certificate for vehicle type: R12S Technical specifications Manufacturer: Gimbel motorcycle technology Vehicle manufacturer: BMW Vehicle model: R 1200 S Vehicle year of construction: 2006 - 2011 Vehicle type: R12S Material: Gray colored GRP Color of the front spoiler: unpainted scope of delivery Handmade front spoiler made of GRP Bracket and screw set TÜV parts certificate The manufacturing steps of our GRP parts (hand lamination) 1. Model and mold making Each of our fairings has been specially developed for each motorcycle model. Starting with the model construction, in which the later workpieces are designed and constructed. After the idea in the head and the first sketches, the prototype is modeled with clay, cardboard, putty and other malleable materials. Based on this prototype, a negative mold is then created from mold construction resin and glass fiber fabric. 2. Apply separating layer At the beginning, a separating layer of wax is applied to the mold and polished with a cotton cloth after it has taken effect. This avoids a connection between the mold and the workpiece. 3. Apply top coat After the separating layer has dried completely, the top layer resin (gelcoat) is applied. This layer forms the later surface and has special surface properties compared to laminating resins. Then the top layer has to dry a bit. 4. Laminate After the top layer has dried, the trim panel is laminated. Glass fibers and laminating resin are laminated in by hand layer by layer. In general, the reinforcement fibers are aligned in the direction of the load. Everything then hardens for at least 24 hours at 25°C. 5. molding Molding follows after drying. To do this, the mold is broken down into its individual parts and the component can be easily removed thanks to the applied separating layer. 6. grinding edges For a clean finish on the workpiece edges, these are ground down after shaping and thus brought into shape. So the blank is finished 7. Attach nameplate Each of our fairing parts, which requires a TÜV entry, has a nameplate laminated into it. This is clearly visible on the inside. This should be covered before painting. Checkout Our shipping partner DHL our service ShipmentDirectly from Germany German dealer1 month right of return 40 years of experienceProduction by hand Invoice with VATGerman VAT ID securityRegistered in the commercial register Our payment methods PayPal Visas MasterCard American Express transfer contact and help Send us an E-mail We are looking forward to your message Give us a call You can reach us Monday - Friday 09:00 - 12:00 | 3:00 p.m. - 6:00 p.m Visit us You are welcome to visit us personally on your tour:Gimbel Auto and Motorcycle Technology GmbH | Kesslerstrasse 7 | 79206 Breisach Design & Programming powered by SOTA.solutions Each of our fairings has been specially developed for each motorcycle model. Starting with the model construction, in which the later workpieces are designed and constructed. After the idea in the head and the first sketches, the prototype is modeled with clay, cardboard, putty and other malleable materials. Based on this prototype, a negative mold is then created from mold construction resin and glass fiber fabric. After the separating layer has dried completely, the top layer resin (gelcoat) is applied. This layer forms the later surface and has special surface properties compared to laminating resins. Then the top layer has to dry a bit. After the top layer has dried, the trim panel is laminated. Glass fibers and laminating resin are laminated in by hand layer by layer. In general, t

Price: 326.93 USD

Location: Breisach

End Time: 2024-08-18T19:07:28.000Z

Shipping Cost: 54.49 USD