HTP Hobart Handler H-10 195957 Welding Mig Gun 195 957 12' foot feet

Description: A brand new HTP replacement welding gun which fits the small Hobart welders such as the Handler® 135, Handler® 140, Handler® 175, Handler® 180, and Handler® 187. It is interchangeable with the Hobart H-10 gun carrying the part number 195 957 and the Hobart H100S2-10 gun carrying the part number 245 924. It uses 2 spade connectors for the trigger wire. This gun is 12 ft long. The diameter of this plug is .480", which you can see in the 2nd picture. You can also see our spring support for the cable as it exits the handle and the gun plug in in pictures 3 and 4. We believe this is a better built, better engineered, and overall gun than the OEM Hobart gun. This HTP replacement gun is better than the OEM gun because of the more ergonomic handle design. Picture 5 (photo 1) shows you the high quality of this gun. The crimp is insulated to protect the trigger wires from chafing. Picture 6 (photo 2) shows the actual crimp with the insulation removed. You can see the crimp to retain the rubber outer jacket and the copper crimp which secures the copper wires to the brass fitting to carry the welding current. Picture 7 (photo 3) shows a cutaway of the coaxial cable assembly, where you can see the copper wires that carry the welding current, the trigger wires, the inner tube that the wires are wrapped around, and which also has the liner running up the center of it. Between the liner and the inner tube is where the shield gas runs. We use the same high quality construction on this welding gun we use on all of the welding guns which are OEM on the HTP Mig welders. The gun is shipped with the 194 010 liner installed so it will handle .023"- .030" wire. It also has a .030" tip installed in it. If you want to run .035" wire, you will need to purchase a 194 011 liner which is in our store and will need some .035" tips. This is a great gun and will save you money over the OEM gun. If you buy this gun from Hobart, it has a suggested retail of $214.85. We are selling you this gun for over a 50% discount! Save time, money and gas when you buy this gun on e-bay. This welding gun does not fit the earlier Hobart Handlers which were made in Troy Ohio. Those models are the Handler, Handler 120, and Handler 150, and the label on the back clearly states they were made in Troy Ohio. We do have a conversion kit which will allow this gun to fit on the earlier Hobart Handlers. It is our p/n HHGCK and is $35.00 additional. ***Save on shipping by combining purchases of select MIG, TIG, or Plasma parts. However, you must pay for all items with one combined payment for this shipping discount. Separate payments for each item are not eligible for a shipping discount. Go to our store and see all the items we have for sale: https://stores.ebay.com/welders4lessIf you need any other hard to find welder parts that are not listed, send us an e-mail with a digital photo- we might have just what you need. Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where for over 35 years all we have sold are quality welding supplies at affordable prices. Please send us a message if you have any questions on our items. M195958SBE

Price: 129.95 USD

Location: Elk Grove Village, Illinois

End Time: 2024-03-03T21:19:34.000Z

Shipping Cost: N/A USD