Hunter Geniune Replacement Handheld Ceiling Fan Remote Control K5324

Description: Genuine Original Hunter Replacement "Simple Connect" Remote Control #K5324 For Hunter Ceiling Fans This is a direct replacement for remote #s: K5324 or 99116 Includes wall holder/bracket Wireless receiver not included Requires 3V CR2032 Battery (included) Part #K5324 FCC ID: IN2TX36 FREQ: 434 MHz Part #K5324 must match for compatibility. Please inquire if you're not sure. Pairing Instructions (The remote must be paired before the fan will operate.) - Open the battery compartment and install the battery- Turn OFF power at the breaker for at least 30 seconds- Turn ON power at the breaker- Within 3 minutes of restoring power to the fan, press both the Fan button and the High (speed 3) button for at least 4 seconds. Your fan will turn on low to indicate successful syncing. If it does not, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan.- IMPORTANT: Use the pull-chain switch on the fan to set the fan speed to the HIGH position before operation.

Price: 38.99 USD

Location: Tustin, California

End Time: 2024-04-05T23:19:30.000Z

Shipping Cost: N/A USD