Description: "A Must Have to Protect Your Boat • Not always finding the boat docks and want to save your precious boat from a concrete ramps or shore with rocks and sand? Keel Guard is designed to protect the boat keel, tough and flexible boat keel pad enables to beach on multiple types of shorelines and ramps. • Being the hull's center point and leading the charge, boat keel is first to bump into concrete, ramps, docks, and rocky shores. keel guards for boats provide the strongest protection for your vessel from abrasions, scratches, scars, everyday wear and tear on the water, no more costly repairs and maintain value of your boat. Compatibility • Keel guard for fiberglass boat: Bass Boats, Ranger Bass Boat, Ski Boats, Wake Boats, Runabouts. • Keel Guard for Some aluminum boat : Fishing and Jon Boats. if boat comes with raised or reinforced center keel, it cannot be raised higher than 1/4 inch and doesn't built with reinforced welding around the edge, rivets, or sharp angles. •Keel Guard for Recreational watercraft:Ski Boats, Skiffs, Dinghy, and most Jet Boats. The boat keel guard can be applied on slightly raised strakes and chines with applied sealant. •keel protector Fit for many boat brands, such as Nitro, Ranger, Triton, Skeeter, Xpress, Tahoe and more. • boat keel guard protector is NOT fit for most kayaks and canoes which is made of low-surface energy plastic(LSE). • keel guards for boats is NOT for most Catamarans with sharp keels with a steep 90° upturn. •keel protector for boats is NOT for Lund, Alumacraft, Smoker Craft, Crestliner or Tracker, Pontoon tubes. • If you have compatibility questions with our boat keel protector, please with us. Warm Tips •Recommend use 3M Primer (not included in the package) for best capabilities of the adhesive. •The keel guard should be mounted at least 4-6 inches above the waterline. •Please do not lean against anything such as v-blocks, bunks, rollers, or bow stops for best adhesion of 3M adhesive. •Please install the boat keel protector on good surface of the boat which doens't have poorly bonded paint, coat or boat bottom paint and uneven surface. •Please keep keel guard and boat hull at the same temperature during application, recommended applying the adhesive when the hull temperature between 65°F to 100°F. " Reliable Keel Guards for Boats: Our keel guard protect your boat keel from sand, rocks, concrete ramps, oyster beds, objects and reduce scrapes, daily wear and tear on the water. Save the keel from any future possible damage with our keel guards and save the cost of boat repairing form continuous shore landing. Compatibility: Please MUST read the Product Description before purchase. Keel guard for fiberglass boats (Bass Boats, Ranger Bass Boat, Ski Boats, Wake Boats, Runabouts) + Some aluminum boats (Fishing and Jon Boats) + Recreational watercraft (Ski Boats, Skiffs, Dinghy and most Jet Boats). The boat keel guard protector can be applied on slightly raised strakes and chines with applied sealant to seal off gaps. Premium Workmanship: The keel protector for boats is produced from thick and durable materials that absorb the shocks and impacts with maximum protection on your boat keel. The rugged and flexible 5 inch wide boat hull protector conforms to your boat's keel easily and won't drag your boat down. Easy to Install with Strong Adhesion: The boat keel protector comes with strong self-adhesive 3M tape that provide firm and tight application. Just stick keel guards on prepared hull surface, delimit, etch, clean, and apply! Warm tips: keel primer was not included in the kit. Size Guide: The 4 foot Keel Guard fit boat size up to 14 ft. It is recommended that apply the keelguard keel protector beyond the lowest point of the boat which protect your boat from snagging and tearing when beaching or loading. The length of boat keel protection can be extended, but not shorten it. Buy with Confidence: We are confident with our shield keel guard, if you have any problems or questions, just with us and our Team will help you within 24 hours.
Price: 58.69 USD
Location: Biloxi, Mississippi
End Time: 2024-12-01T00:45:08.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Color: White
Size: 4FT for Boat Up to 14FT
Package Dimensions LxWxH: 9.37x8.58x5.28 Inches
Weight: 3.55 Pounds
Type: Does not apply
Brand: JYINCPED
