Description: Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared k*eys, generating special k*eys, reading BMW engine ISN code. Compatible Car Brands & Car systems : LAUNCH XPROG 3 Compatible with:VW,AUDI ,SKODA,SEAT,BMW,MERCEDES BENZ,TOYOTA and more continue to be updated … Supports Systems: Engine,Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. Compatible with: X431 V, X431 V+, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII Reads & writes most Engine/Gearbox ECUs without disassembling the shell,Works with reprogramming device to backup/restore programming data (For Siemens engine ECU). Launch X-Prog 3 Advanced Immobilizer & Key ProgrammerX-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.Launch X-Prog 3 Features:1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII5. Reads & writes most Engine/Gearbox ECUs without disassembling the shellLaunch X-Prog 3 Advantages: 1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU). Core Functions:1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.8. Supports the BMW CAS4/CAS4+ module replacement.9. Supports the ECU cloning and replacement for BMW Siemens engines.10. Erase the password for Mercedes-Benz engine and gearbox within 3S.11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute. How to use X-PROG3 to read and write data? Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc. Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host. Launch X-Prog 3 Supported Chip Brands:It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated. Supported EEPROM Brands:It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated. XPROG3 Operation Connection:Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etcConnection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic hostConnection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.Display: X-PROG3 Packing list: • Main unit • Power adaptor • Main diagnostic cable • The fourth-generation data acquisition cable • The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard) • BENCH mode cable • MCU converter V1 • MCU converter V2 • MCU cable with multiple leads • EEPROM chip adaptor • Benz infrared analog acquisition key
Price: 529 USD
Location: Perth Amboy, New Jersey
End Time: 2024-09-18T04:00:54.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: LAUNCH
Supported System: IMMO,Automatic Transmission, Instrument System, CAS, Loc-k System
Accessories: Adapter Cable, Carrying Case, USB Cable, User Guide
Type: Key Programming Scanner
Warranty: Lifetime
Vehicle Type: Passenger Vehicle
Manufacturer Part Number: Immobilizer & Key Programmer
Connectivity: USB
OBD Interface: CAN, EOBD, OBD, OBDII
Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Compatible with 1: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0
Compatible with 2: X-431 series diagnostic scanners
Compatible with 3: X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
Compatible with 4: X-PROG 3 enables reading/writing EEPROM
Compatible with 5: on-board MCU and for BMW CAS4+/FEM chips
Compatible with 6: for Mercedes-Benz infrared keys, generating special
Interface: DB26, DB15
Input Power: DC12V
Working CurrentMax: 500mA
Power Consumption: 5W
