Description: Leeson 2 HP Farm Duty Motor110090This Leeson Electric 2 HP Farm Duty Motor #110090 is for use where exposure to water, dust and dirt exists. Ideally suited for use in Farm or Ag equipment such as feeders, conveyors, grain elevators, silo unloaders, and other demanding farm duty equipment. This Leeson Farm Duty Electric Motor is designed for feeders, conveyors, fans, grain elevators, silo unloaders and other demanding farm-duty equipment. Mechanical Features: Gasketed capacitor housing and conduit boxes provide protection in all environments. Double shielded ball bearings pre-lubricated with Shell Dolium R grease having operating temperatures of -40? to 320? F and special formulation to provide extra long life and moisture resistance. Shaft finger for extra bearing protection. Rubber boot or gasket with manual protector provides weather protection.Electrical Features: Low temperature manual overload protector protects against automatic reset. Class "F" copper windings and varnish. Capacitor start provides high starting torque with normal starting current (single phase only).2 HP 1725 RPM MotorSingle PhaseJ56HZ/J145T Frame7/8" Shaft230 Volt9.2 F.L. Amps 230VCapacitor start/capacitor run design for reduced amperage.Combination 56HZ base has mounting holes for NEMA 56 and 143-5T and a standard NEMA 145T frame shaft of 7/8" diameter.
Price: 520 USD
Location: Plainfield, Illinois
End Time: 2024-12-11T01:52:02.000Z
Shipping Cost: 80.25 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Nominal Rated Input Voltage: 230 V
AC Phase: Single Phase
Actual Rated Input Voltage: 230 V
Inverter/Vector Duty Rating: Inverter Duty
Special Motor Construction: Severe Duty Motor
Base RPM: 1725 RPM
Current Type: AC
Unit Type: Unit
Service Factor: Does not Apply
NEMA Frame Suffix: Rigid Mount
Full Load Amps: 9.2 Amps
Rated Load (HP): 2
IEC Frame Size: J56HZ/J145T Frame
NEMA Design Letter: Design B (General Purpose)
AC Frequency Rating: Frame 56Hz
Enclosure Type: TEFC (Totally Enclosed Fan Cooled)
Shaft Type: Shaft 7/8" dia
AC Motor Type: 2 HP 1725 RPM Motor
Shaft Diameter: 7/8 In.
Mounting Type: Rigid Mount
DC Stator/Winding Type: Permanent Magnet
Brand: LESSON
Reversible/Non-Reversible: Reversible
Protection Against Liquids: Splashing Water
Model: LESSON MOTOR 2HP
Country/Region of Manufacture: United States
Protection Against Solids: Dust Protected
