Magnis Duo SDR transceiver, 5W by Multus SDR

Description: Update to what components are pre-installed. All SMD part will now be pre-installed by Multus. Most of the power section along with USB circuit will be installed so the PSoC and I2C network can be tested prior to shipping. The first 2 pictures show what component will be install when you purchase the PCB. This is a Rev 4 PCB which now only fits the Hammond 1455N1601 enclosure. The Magnis Duo is an updated version of the Magnis. The radio is now mostly through hole parts and the oscillator was changed to an Si5351 for Multus MSCC compatibility. This radio uses plug in BPF/LPF modules so band plan changing is very easy. The PA section is also updated to a RD16HHF1 for a clean 5W output. The frequency coverage is 160M – 10M. Below are some of the features: •96kHz digital I/Q interface. No additional sound card needed. Only one USB connection is needed. •Two tone, 2 kHz spacing, third-order dynamic range: 99 dB. •Support for Elecraft T1 automatic antenna tuner. •External Amplifier control via AMP port. •CW Key Jack. •DG8SAQ/PE0FKO/SoftRock control interface. •Open Source firmware. •Firmware Field Updates via on board USB bootloader.•Back cover has temperature sensing controller for cooling fan. Fan is normally off but turns on and increases speed as temperature rises. Heat sink and fan are adequate for continuous key down operation. With these additional features: • All bands. The Magnis Duo covers all bands from 160M to 10M. • Enhanced receive. A RF amplifier is now in the RF front end that provides about 19db of gain at 10M and tapers down to about 0db at 160M • Receive Band Pass Filters for all band groupings (160M,80M,40M-60M,20M-30M,15M-17M,12M-10M) • The same BPFs are used in conjunction with Low Pass Filters in the transmit path to provide a clean output. • 5W Class A PA. Clean output of 5W on all bands. • Real CW. Supports zero latency CW. Software generated CW is not required. The Magnis Duo is also compatible with all host SDR applications that work with the Basic (HDSDR, Genesis SDR, Quisk and others). Also works with Multus SDR application MSCC on windows 10 desktop or our Fortis Cube using a Raspberry Pi-4B. Specifications: Receive: Continuous from 1.8MHz to 30MHz. (Lower sensitivity below 1.8MHz and between amateur bands) Sensitivity: MDS: Average -123db. (-125db on 10M. -121db on 160M) ( MDS performance specifications for amateur bands only.) Transmit: Power Output: 5W, (transmit permitted on amateur bands only). Spurious Emissions: Meets or exceeds FCC requirements (-43db from carrier). Technical support and documentation is located on our groups io forum. Please search for Multus SDR. Pictures are of a fully assembled unit and enclosure not included in this auction. NOTE: This is not a kit. Included with the PCB will be installed All SMD parts(except for filter modules) along with some through hole parts in the Power and USB circuit, Front and back panels to fit Hammond 1455N1601 enclosures, filter module PCBs for all Bands. These PCBs only fit the Hammond enclosure unlike Rev 3 PCB. These are assembled upon receiving order. There is a one to two business day lead time before shipping the kit.

Price: 101.29 USD

Location: Mansfield, Ohio

End Time: 2024-10-27T17:48:44.000Z

Shipping Cost: N/A USD