Maxon FX PAC-9 Pure Analog Chorus Guitar Effects Pedal

Description: Maxon FX PAC-9 Pure Analog Chorus Guitar Effects Pedal At Music Store Live we're all musicians like you, and we know how hard it can be to afford all the gear that you want and need. We encourage you to make us an offer. Often times, you'll be pleasantly surprised! Additionally, don't hesitate to contact us regarding financing options. We'll do everything we can to help get that next piece of gear into your hands. Manufacturer's Description The first thing you’ll notice when you step on the PAC-9 is a beefy, full-bodied chorusing that punches you directly in the chest – gone are the thin, hissy, sissified chorus tones of yesteryear, replaced instead by a full-frequency effect that simply sounds massive. The PAC-9’s circuit uses professional-grade IC’s typically reserved for High-End Audio applications, providing audiophile performance in a compact stompbox format. When compared to a standard chorus, the PAC-9’s effect appears more dramatic and has more presence in a mix – this is due to the retention of low and low-mid frequencies that are typically chopped out by other boxes. The PAC-9’s LFO has an extended range that allows it to nail classic rotary speaker sounds with ease. In addition to standard Speed and Width controls, The PAC-9 also features two unique controls: The Pure switch boosts the delayed signal by 4 dB to create a more dramatic, tremolo-like chorus effect, while the Bright switch subtly scoops lows on the delayed signal for a more traditional chorusing sound. Standard and inverted (90 degrees out of phase) outputs allow for mono, stereo, or inverted mono signal routing options. The PAC-9’s internal voltage-doubling circuitry provides maximum headroom to eliminate input distortion. The higher operating voltage also allows it to be used in an FX loop to place the chorus effect post-gain. TECH TALK NOTE ON POWERING THE PAC-9 - this pedal’s voltage regulator IC requires a high inrush current of approximately 2000 mA upon startup. When using with a Power Brick such as the Voodoo Labs Pedal Power 2+, this pedal should be connected to a high current power jack when possible. If it is not possible to connect to a high current jack, you can power the PAC-9 by leaving a battery in the pedal. Upon initial start-up, unplug the external DC power input cable, engage the pedal, and then plug the DC power input cable back in – the pedal will now power up normally off the external power supply until you power down your pedalboard. Features Analog chorus with lush, organic tone Wide-range Speed control for Rotary speaker effects Special noise filtering circuit Bright and Pure switches for additional tonal options Stereo outputs Works in FX loop or front-end of amp True Bypass Switching Specifications Input Impedance: 500K Ohms Output Impedance: 10K Ohms or less Maximum Output Level: +9 dB (400 Hz) Delay Time: 4.6 msec – 7.68 msec Speed Frequency: .33 Hz – 8 Hz Controls: SPEED, WIDTH Switch: BYPASS/EFFECT (mechanical TBS)PURE, BRIGHT In/Out: INPUT, OUTPUT, INVERSE OUTPUT Residual Noise: -95 dB (IHF-A) Indicator: BYPASS/EFFECT LED Internal Circuit Voltage: 9 VDC (DC-DC Converter) Current Consumption: 21 mA / 9 VDC Power Supply: 6F22 9V battery or Maxon AC Adaptor Battery Life: Manganese battery 8.5 hours @ 25deg C, Alkaline battery 20 hours @ 25deg C Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) / 2.9” (W) x 4.9” (D) x 2.13” (H) Weight: 580 g (including battery) / 20.46 oz.

Price: 299 USD

Location: National City, California

End Time: 2024-11-25T19:08:01.000Z

Shipping Cost: 0 USD