MPPT 60AMP Solar Charge Controller For 12V 24V DC Battery Regulator MAX 1500W U5

Description: After the product has been used, it was returned without checking whether the function is complete. Please pay attention to this when purchasing. If it cannot be used, please contact me for a refund or exchange 60A MPPT Solar Charge Controller Battery Regulator Charger 12/24V PV 100V MPPT P60A 12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:750W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1500W Overview: MPPT series solar charge controller is based on an advanced maximum power point tracking (MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 98%. This series MPPT have such advantages: All the Various Real-time data show on one display ,Convenient user to check The Solar Panel input voltage up to 100V, suitable for various specifications of solar panel The power supply uses ultra low power chip ,reducing static standby power consumption ,reduce energy loss Dual USB 5V Output for phone charging Support Remote Display Feature: Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%. High quality components, perfecting system performance, with maximum conversion efficiency of 98%. Ultra-fast tracking speed and guaranteed tracking efficiency. Wide MPP operating voltage range. 12/24VDC automatically identifying system voltage. LCD panel display design, dynamically displaying tool‟s operating data and working condition. Support 3 charging lead-acid battery options: Sealed, Gel, Flooded. Charge mode: three stages (constant current, constant voltage, floating charge), it prolongs service life of the batteries. Battery temperature compensation function. Multiple load work modes This solar charge controller with three time function. A: time (night working) B: period (pause) C: time slot (dawn working) Package Including: 1PCS MPPT Solar Controllers 1PCS User Manual (English) 1PCS Temperature Sensor Function: "P" series of an intelligent, multi-purpose solar charge controller LCD screen display Battery reverse discharge protection Simple (and more time control) operation Battery reverse polarity protection MPPT charging mode Battery under voltage protection Parameter user can reset Overload, short-circuit protection A key to open and close the load Automatic temperature compensation function A key to restore the factory settings USB5V charge 2.4A LCD Operating interface description : Network Line Interface (RS485) Indicator: Green light represents the battery, green light flashes, indicating that the load is working properly; yellow light indicates solar energy; yellow light flashes, indicating solar energy charging; Parameter Table: Model MPPT P40 MPPT P60 Maximum power current 40A 60A Battery Votlage 12V 24V Auto Battery float voltage 13.8V(12V system)/27.6V(24V system) Battery (under voltage) protection 10.6V(12V system)/21.2V(24V system) Battery (under voltage) recovery voltage 12.6V(12V system)/25.2V(24V system) Solar Panel Maximum open circuit voltage(Voc) ≤48V（Voc）12V system ; ≤96V（Voc）24V system Maximum open circuit voltage of the solar panel (Voc) 18V-48V(12V system) / 36V-96V(24V system) Maximum PV input power 520W(12V system) 1040W(24V system) 750W(12V system) 1500W(24V system) System load loss ≤13mA Loop Buck ≤100mV Operating Temperature -10°C~60°C Storeage Temperature -30°C~70°C Humidity requirements ≤90%, No condensation Temperature compensation -4mV/Cell/°C Installaton Lin(mm2) 8mm2 10mm2 Installaton Line(AWG) 10(AWG) 10(AWG) Batery capacity configuration ≥300AH ≥400AH Photo: Product Description 40A 60A MPPT Solar Charger Controller for 12V/24V/36V/48VDC Batteries 100% MPPT controller Intelligent Maximum Power Point Tracking technology Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V Three-stage charging optimises battery performance Multi-function LCD displays Reverse polarity protection of solar panel Overcharge protection Can be mounted easily Suitable for battery types of sealed lead acid, vented Gel, and Lithium battery Notes: The output terminal is for lamp only ( 12V system less 60W, 24V system less 100W ), and it will be burnt if connecting to other loads. The output for the battery is no polarity reverse protection. Datasheet: Model No MPPT-30A MPPT-40A MPPT-50A MPPT-60A Charging mode MPPT Maximum power point tracking automatically Charging 3-stage：constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 12V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V~DC60V) Soft start time ≤1S ≤1S ≤1S ≤1S Dynamic response and recovery time 100us 100us 100us 100us Max efficiency ≥98.1% (Voc is 1.5 or 2 times than battery, then it’s best efficiency) PV utilization ≥99% ≥99% ≥99% ≥99% Input specification Voc from PV ( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency. ) 12V system (DC20V~DC80V) 24V system (DC37V~DC100V) The maximum PV input voltage (Voc) DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.) The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller.) 12V system (400W) 24V system (720W) 12V system (480W) 24V system (960W) 12V system (600W) 24V system (1200W) 12V system (720W) 24V system (1440W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 30A 40A 50A 60A Temperature Coefficient ±0.02%/ centi-degree Automatic temperature compensation 14.2V-（Max temperature-25 centi-degree）*0.3 Output voltage ripple-peak 100mV 100mV 100mV 100mV Output voltage accuracy ≤±1% ≤±1% ≤±1% ≤±1% Indicating LCD display See LCD display instruction See LCD display instruction See LCD display instruction See LCD display instruction LED display CPU working indicator CPU working indicator CPU working indicator CPU working indicator Protection function Output over-voltage protection See output specification See output specification See output specification See output specification Input Anti-intrusion protection yes yes yes yes Temperature Protection 75 centi-degree 75 centi-degree 75 centi-degree 75 centi-degree Temperature increased protection Output power will reduce when it’s more 70 centi-degree. Output power will be normal when it’s less 55 centi-degree. Fan-on temperature >40 centi-degree >40 centi-degree >40 centi-degree >40 centi-degree Fan-off temperature <35 centi-degree <35 centi-degree <35 centi-degree <35 centi-degree Other parameters Acoustic noise ≤40dB ≤40dB ≤40dB ≤40dB Cooling way Forced air cooling. Components Imported materials，Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides and fluorides Properties Size (mm) 210x210x85 210x210x85 210x210x85 210x210x85 Net weight(Kg) 1.25 1.25 1.35 1.35 Gross weight(Kg) 1.35 1.35 1.45 1.45 Security Level According to CE、PSE、FCC、EMC,EN60950 Electromagnetic Compatibility According to EN61000，EN55022，EN55024 Enclosure IP21 IP21 IP21 IP21

Price: 59.99 USD

Location: Hebron, Kentucky

End Time: 2024-09-15T08:26:16.000Z

Shipping Cost: 0 USD