ODROID-HC4

Description: ODROID-HC4 ODROID-HC4 HC4-Plus versionincludes OLED Displayand RTC Clock BatteryHC4-Base versiondoes not include OLEDDisplay and RTC ClockBattery, but will beavailable later as anoptional add-on See the Not Included section below for additional items needed and/or recommended for operation The ODROID-HC4 is a mini PC with a dual SATA drive dock which makes an affordable solution for a Do-It-Yourself Network Attached Storage (NAS) server. This server centralizes data and enables users to share and stream multimedia files to phones, tablets and other devices on a network. Ideal for workgroups, families, and single users. A wide variety of software is available to tailor the ODROID-HC4 to your specific needs. Upgrade the storage capacity of this server with one or two larger HDD/SSD. The HC4 is built with two high performance SATA port and a Gigabit Ethernet port, to build a faster network storage device, and also supports RAID configurations. The HC4 is designed to hold 2x 2.5 inch HDD/SSDs or 3.5inch HDDs in any combination. The HC4 is based on the very powerful Amlogic S905X3 chip, just like the ODROID-C4. It can run Samba, FTP, NFS, SSH, NGINX, Apache, SQL, Docker, WordPress and other server software smoothly with full Linux distributions like Ubuntu, Debian, Arch and OMV. Links to compliance documentation available at the bottom of this listing. Additional items required to operate - see "NOT INCLUDED" section below KEY FEATURES Amlogic S905X3 Processor Quad-Core Cortex-A55 (1.8GHz) 4GB DDR4 RAM with 32-bit bus width (PC4-21333 grade) Dual SATA-3 port for 3.5inch and/or 2.5inch HDD/SSD storage UHS-1 capable micro-SD card slot for boot media Gigabit Ethernet port (RTL8211F) 1x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) Digital audio over HDMI USB 2.0 Host UART serial console IR Receiver 1x DC Jack (5.5/2.1mm) rated for 14.5~15.5VDC 84 x 90.5 x 25mm 280g including heatsink, fan and case SPECIFICATIONS Form Factor: Board Dimensions: 84mm x 90.5mm x 25.0mmHeatsink Dimensions: 40mm x 32mm x 10mmWeight: 280g including heatsink, fan and case Processor: Amlogic S905X3 ProcessorL1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processorL1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processorL3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.800GHz)ARMv8-A architecture with Neon and Crypto extensionsMali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) Memory: DDR4 4GiB with 32-bit bus widthData rate: 2640 MT/s (PC4-21333 grade)1.2Volt low power design Storage: 1x Micro SD slot (DS/HS mode up to UHS-I SDR104) Networking: 1x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) Realtek RTL8211F (Ethernet transceiver) LED indicators Green LED: Flashing by data traffics at 100Mbps connection Amber LED: Flashing by data traffics at 1000Mbps connection Video: 1x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) Audio: 1x HDMI digital output Cooler: 1x Passive heatsink ( 40x32x10 mm ) on the CPU of PCB board 1x Hydraulic Bearing FAN Rated Voltage : 5V Rated Current : 100mA Max Speed RPM : 4,000 Air Flow CFM : 4.3 Air Pressure (In H2O) : 0.053 Noise Level(dBA) : 23.9 Dimension : 40 x 40 x 10.6 mm Wire & Connector : 80mm, 4 pin 1.25mm pitch External I/O: 1x USB 2.0 host port1x Debug serial console (UART)2x SATA Connectors Other features: IR receiver for remote controllerSystem LED Indicators: Red (POWER) - Solid light when DC power is connected Blue (ALIVE) - Flashing like heartbeat while Kernel is running. Power: 1x DC jack: outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mmDC input: 14.5V ~ 15.5V DC 15V/4A power adapter is recommended Power consumption with two ST2000DM006 HDDs : IDLE(with HDD in spin-down) : ≃ 5.88W Active(using SAMBA): ≃ 15.59W Suspend: ≃ 0.29W NOT INCLUDED No power supply included - 15V/4A Power Supply recommended No microSD card included OLED display with integrated RTC battery is optional (included on the Plus model) USB hub recommended if connecting more than one USB device to the HC4 No WiFi included - Wired networks are preferable for NAS units due to bandwidth and reliability, but we have WiFi modules available if desired USB-UART module highly recommended for tinkering with u-boot, kernels, multiple installs and more ODROID-HC4 ODROID-HC4 HC4-Plus versionincludes OLED Displayand RTC Clock BatteryHC4-Base versiondoes not include OLEDDisplay and RTC ClockBattery, but will beavailable later as anoptional add-on See the Not Included section below for additional items needed and/or recommended for operation The ODROID-HC4 is a mini PC with a dual SATA drive dock which makes an affordable solution for a Do-It-Yourself Network Attached Storage (NAS) server. This server centralizes data and enables users to share and stream multimedia files to phones, tablets and other devices on a network. Ideal for workgroups, families, and single users. A wide variety of software is available to tailor the ODROID-HC4 to your specific needs. Upgrade the storage capacity of this server with one or two larger HDD/SSD. The HC4 is built with two high performance SATA port and a Gigabit Ethernet port, to build a faster network storage device, and also supports RAID configurations. The HC4 is designed to hold 2x 2.5 inch HDD/SSDs or 3.5inch HDDs in any combination. The HC4 is based on the very powerful Amlogic S905X3 chip, just like the ODROID-C4. It can run Samba, FTP, NFS, SSH, NGINX, Apache, SQL, Docker, WordPress and other server software smoothly with full Linux distributions like Ubuntu, Debian, Arch and OMV. Links to compliance documentation available at the bottom of this listing. Additional items required to operate - see "NOT INCLUDED" section below KEY FEATURES Amlogic S905X3 Processor Quad-Core Cortex-A55 (1.8GHz) 4GB DDR4 RAM with 32-bit bus width (PC4-21333 grade) Dual SATA-3 port for 3.5inch and/or 2.5inch HDD/SSD storage UHS-1 capable micro-SD card slot for boot media Gigabit Ethernet port (RTL8211F) 1x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) Digital audio over HDMI USB 2.0 Host UART serial console IR Receiver 1x DC Jack (5.5/2.1mm) rated for 14.5~15.5VDC 84 x 90.5 x 25mm 280g including heatsink, fan and case SPECIFICATIONS Form Factor: Board Dimensions: 84mm x 90.5mm x 25.0mmHeatsink Dimensions: 40mm x 32mm x 10mmWeight: 280g including heatsink, fan and case Processor: Amlogic S905X3 ProcessorL1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processorL1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processorL3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.800GHz)ARMv8-A architecture with Neon and Crypto extensionsMali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) Memory: DDR4 4GiB with 32-bit bus widthData rate: 2640 MT/s (PC4-21333 grade)1.2Volt low power design Storage: 1x Micro SD slot (DS/HS mode up to UHS-I SDR104) Networking: 1x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) Realtek RTL8211F (Ethernet transceiver) LED indicators Green LED: Flashing by data traffics at 100Mbps connection Amber LED: Flashing by data traffics at 1000Mbps connection Video: 1x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) Audio: 1x HDMI digital output Cooler: 1x Passive heatsink ( 40x32x10 mm ) on the CPU of PCB board 1x Hydraulic Bearing FAN Rated Voltage : 5V Rated Current : 100mA Max Speed RPM : 4,000 Air Flow CFM : 4.3 Air Pressure (In H2O) : 0.053 Noise Level(dBA) : 23.9 Dimension : 40 x 40 x 10.6 mm Wire & Connector : 80mm, 4 pin 1.25mm pitch External I/O: 1x USB 2.0 host port1x Debug serial console (UART)2x SATA Connectors Other features: IR receiver for remote controllerSystem LED Indicators: Red (POWER) - Solid light when DC power is connected Blue (ALIVE) - Flashing like heartbeat while Kernel is running. Power: 1x DC jack: outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mmDC input: 14.5V ~ 15.5V DC 15V/4A power adapter is recommended Power consumption with two ST2000DM006 HDDs : IDLE(with HDD in spin-down) : ≃ 5.88W Active(using SAMBA): ≃ 15.59W Suspend: ≃ 0.29W NOT INCLUDED No power supply included - 15V/4A Power Supply recommended No microSD card included OLED display with integrated RTC battery is optional (included on the Plus model) USB hub recommended if connecting more than one USB device to the HC4 No WiFi included - Wired networks are preferable for NAS units due to bandwidth and reliability, but we have WiFi modules available if desired USB-UART module highly recommended for tinkering with u-boot, kernels, multiple installs and more × × × × × × × × × × × × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Price: $6.00 (local shipping) Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Odroid-XU4 ODROID-C1+ ODROID-C1+/C2 Case Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © ameriDroid Shipping & Payments Shipping is a flat rate across US at a rate of $6.00 Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 102.95 USD

Location: Ukiah, California

End Time: 2024-03-16T18:18:33.000Z

Shipping Cost: 6 USD