Description: Oil-Based Gel Polyurethane This is an oil-based gelled clear finish that produces a soft, hand-rubbed sheen. Its thick formula enables multiple hand-applied coats without drips or brush marks. Where to UseGel Polyurethane is recommended for use on interior wood surfaces. This clear finish can also be used over stained surfaces that have thoroughly dried.Ideal for use on cabinets, furniture, woodwork, trim, and antiques.Surface PreparationAll surfaces must be clean, dry, and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected. Wood surfaces must be sanded smooth and sanding dust removed. Wood that has been stained or finished should dry completely (24 hours) before application of Gel Polyurethane.ApplicationStir thoroughly before and during application. Do not apply in direct sunlight or areas of extreme air movement.Use a soft, lint-free cloth or paper towel and apply a liberal amount to an entire side or section of your project.Remove excess polyurethane quickly with a clean cloth, then buff lightly and briskly with another clean cloth, working in the direction of the grain until the surface is smooth with a slight wet look.Continue to apply and buff until entire project is coated.Gel Polyurethane will dry to touch in 5 to 6 hours. Allow at least 6 hours between coats. Sanding between coats is not necessary.Reapply. Two to three coats are recommended; however, additional coats will enhance build and provide greater protection.ThinningDo not thin. Use as packaged.CoverageApproximately 700 to 750 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.Drying TimeApply when air and surface temperatures are between 60° and 90°F and humidity is between 30% and 70%. At 50% relative humidity and 70°F, Gel Polyurethane will dry to touch in 5 to 6 hours. In case of high humidity, overnight drying may be necessary. Under ideal drying conditions, allow 6 hours before recoating. Drying time will be affected by temperature, humidity, and film thickness. Protect product from freezing prior to and during application.CleanupUsing a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.DANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required for these wastes to start on fire by themselves. Immediately place rags, steel wool, sanding residue, and other wastes used or soaked with this product in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.
Price: 21.99 USD
Location: Webster, New York
End Time: 2024-02-13T23:24:19.000Z
Shipping Cost: 10.99 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: Old Masters
Container Size: 1 Pint
Type: Stain
Color: Clear Satin
MPN: 85108
Sheen: Satin
Suitable For: Wood
Base Material: Oil-Based
