Eppendorf

Outboard Motor Fishing Boat Engine Water Cooling/Air Cooling 2/4 Stroke 3.5-7 HP

Description: Friendly Reminder: Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor. Don't do the following will avoid cylinder Scoring: 1,start the motor on bank 2, use the motor when it stop coming out of water Even if you want test the motor, it should be done in the river! When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.Outboard Motor Fishing Boat Engine Water Cooling/Air Cooling 2/4 Stroke 3.5-7 HPWelcome to my store Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.Don't do the following will avoid cylinder Scoring:1,start the motor on bank2, use the motor when it stop coming out of waterEven if you want test the motor, it should be done in the river! 1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon 2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed 3.It can be marched with inflatable boats, rubber boats or fishing boats 4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat MODEL ONE: 3.5HP & 2-Stroke(TYPE ONE) Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. SKU:OT-028Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode STRICTLY FOR PROFESSIONAL USE ONLY Please Note: There are two pull starter included in the parcel(one is the machine, another one for spare) We don't supply wearing parts (pull starter)for free. If you want buy one please click: Description: Overall length:83cm(32.68inch) Overall widteh:36.5cm Overall height:22cm Transom height:42cm Full throttle perating range:4000-5000r/minMAX SPEED:4000~5000rpm Maximum output:3.5hp Speed:10km/h Type:2-stroke Short shaft :40cm Ignition system: CDI system Starting system: Manual start Staring carburetion system: Choke start Propeller mark:7-1/45-A(inch) The engine and the propeller ratio:2:1 Recommended fuel: Regular unleaded gasoline Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point) Gear ratio: 27/13 Maximum speed: 10 km / h Built-in fuel tank: 1.3L Fuel consumption per hour: 1.5L When at normal cruising, the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive. Announcements: After in the sea water or turbid water cruising 1.Use the fresh water cleaning the outboard motor 2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water. 3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown. 4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine. 5.Before the long term storing,you should run out of the gasoline in the fuel tank. 3.5HP & 2-Stroke Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. SKU:OT-ML-279Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode Please Notice:STRICTLY FOR PROFESSIONAL USE ONLYWhat you will receive is our new version of this boat engineThe trademark will be Yadao instead of Speeda. Overall length:83cm(32.68inch) Overall widteh:36.5cm Overall height:22cm Transom height:42cm Full throttle perating range:4000-5000r/minMAX SPEED:4000~5000rpm Maximum output:3.5hp Speed:12km/h(four people) Type:2-strokeShort shaft :40cmIgnition system:CDI system Starting system:Manual start Staring carburetion system:Choke start] Propeller mark:7-1/45-A(inch) The engine and the propeller ratio:2:1 Recommended fuel:Regular unleaded gasoline Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point) Gear ratio: 27/13 When at normal cruising,the appearance ofthe seventh picture. Falling back the boat, the appearance of the outboard motor likes theeighth picture . Falling back the boat, you shoulddrive slowly otherwise the boat will not stable. Theoutboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back,the boat can fall back to drive. Announcements After in the sea water or turbid water cruising 1.Use the fresh water cleaning the outboard motor 2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water. 3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown. 4.The engine should deposit in the aridity and ventilatedwell place,avoid exposing directly in the sunshine. 5.Before the long term storing,you should run out of the gasoline in the fuel tank. 4HP & 4-Stroke OT-ML-277 Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!! About certification: We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. STRICTLY FOR PROFESSIONAL USE ONLY Type: 4 stroke 4 horsepower Short shaft :40cm Capacity: 52cc Transmission ratio: 2.08 (27:13) The number of cylinders: 1 MAX SPEED:4500~5500rpm Maximum power: 4hp Shift position: clutch control Package volume: 95x40x30 cm Ignition system: CDI Cooling system: air cooling Starting method: Manual start Refueling: No. 93 gasoline Propeller size: 7 1/4X7-A The maximum fuel consumption: 1.4 liters / hour Recommended Lubricant:4 stroke lubricating oil Mixing ratio:Pure gasoline Trim and tilt system:Manual Tilt Start-In-Gear protection/clutch feature prohibits prop rotation while idling convenience without reverse gear, Features 360 degree steering rotation for reverse without gear shifting Cooling system: air cooling Easy pull off engine cover with push button latch for instant motor access 7HP & 4-StrokeOT-ML-278Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period (10 hours). (If you do not know how to handle this, please contact with us.) About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.About the noise: 1. All the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon 2. The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.3. It can be marched with inflatable boats, rubber boats or fishing boats.4. Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.Note:Must read before use!Four stroke 7 hp:Firstly, Fill the gear oil (open gear box lid and fill it).Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.Thirdly, Fill engine oil don't exceed the head of the pattern.Forthly, Pull the gear to netural gear, and plug the brake line in, hang the other side of the brake line on your wrist at the same time.Then, turn the accelerator gets up to 50% and rapidly pull the starter line.After the motor start , please turn the gear to minimum before put another gear.Otherwise, the gearwheel will be broken if you put high gear.Description:Universal motors, high performance, reliable quality· Perfect match inflatable boats, fishing boats, sailboats, and small yachts.· Economical and compact structure. Durable, lightweight and anti-corrosive construction.· Maneuverable and safe twist grip throttle control.· Suitable for: Freshwater and saltwater· One year warranty covers the motor, to provide parts freeType: 4 stroke 7 horsepowerCapacity: 196CCTransmission ratio: 2.08 (27:13)The number of cylinders: 1Maximum speed: 4500-6000rpmMaximum power: 7hpShift position: clutch controlPackage volume: 120x60x42.5 cmIgnition system: TCICooling system: air coolingStarting method: hand startRefueling: No. 93 gasolinePropeller size: 3-7 1/2''x5''Gear position: F-N-RControl system: Tiller controlN.W./G.W.: 26.7/31.7kgsRecommended Lubricant: 4 stroke lubricant oilTrim and tilt system: Mannual tiltStandard fuel tank capacity: 1.4L/withinlong shaft :50.8CM 6.5 HP & 4-Stroke OT-ML-282Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. The Hangkai 6.5 hp 4-stroke provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport! With all of this available at a competitive price, it is no wonder this little outboard receives so much attention and praise! Brand: HANGKAI Displacement: 123CC Gear ratio: 2.08(27:13) Cylinder: 1 Max.speed(r/min): 5000-6000 Gear Positions: F-N-R Packing size: 114x64x41cm Ignition System: CDI Cooling System: Water-coolingShort shaft :40cm Control System: Tiller control Starting System: Manual start Control System: #93 gasoline N.W./G.W.(kgs): 26/31.2 Bore x Stroke(mm): 59x45 Recommended Propeller range: 3 -7"x9" Recommended Lubricant: Four Stroke Lubricating oil Mixing ratio: Pure gasoline Trim and tilt system: Manual Tilt Overall LxWxH(cm): 78.3x34.3x103.9 Standard fueel tank capacity: 12L Optional fuel tand capacity: / Bonus accessories: brochures, tubing, cotter pinsPump impeller, start rope, start key12 liter fuel tank, tool kit, spark plug, cylinder head pad 3.6HP & 2-Stroke Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.SKU:OT-ML-132Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode STRICTLY FOR PROFESSIONAL USE ONLY 1.Start-In-Gear protection/clutch feature prohibits prop rotation while idling2.Lift/Tilt feature for shallow water operation and convenience3.Features 360 degree steering rotation for reverse without gear shifting4.Superior engine water cooling system for improved engine performance5.Easy pull off engine cover with push button latch for instant motor accessProduct DescriptionMAX SPEED:4000~5500rpm Short shaft :40cm Features: Features 360 degree steering rotation for reverse without gear shifting . Start-In-Gear protection/clutch feature prohibits prop rotation while idling . Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance . Easy pull off engine cover with push button latch for instant motor access . Standard CDI ignition system for easy starting and improved performance . Vertical mount engine design for increased power, performance and durability . Superior carbonation system with primer bulb for increased efficiency . Twist grip throttle handle and engine stop button for improved response . Superior outboard anti corrosion system and anodes for increased durability . Durable cast Nylon plastic construction for superior corrosion protection . Through the prop exhaust outlet for decreased noise and pollutant . Heavy duty lightweight Nylon plastic cast propeller is standard equipmentShipping Weight: 21.4 pounds 6HP & 2-Stroke OT-C001-073Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us).our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understandingSTRICTLY FOR PROFESSIONAL USE ONLYTechnical ParametersDimension Overall length 1040mm(40.9 in)Overall width 872mm(34.3 in)Overall height 332mm(13.1 in)Transom height 44CM(17.3 in)Short shaft :40cm Performance Full throttle operating range 5000-6000r/min MAX SPEED:4500~5500rpmMaximum output 6HPIdling speed ( in neutral) 1000±100 r/minEngine Gear positions Forward-neutral-reverseGear ratio 2.15(28/13)Trim and tilt system: Manual tiltDrive unit Recommended fuel Regular unleaded gasolineIntegral fuel tank capacity 2.5LRecommended engine oil 2-stroke outboard motor oilEngine oil type Genuine or recommended 2str engine oilLubrication System Engine oil mixed gasolineEngine oil mixing ratio Fuel 50: Engine oil 1Gear oil quantity 195ml(6.6 fl.oz.)Tightening torque for engine Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m) PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.Features:Fast shipping from US WarehouseFeature 1Compact Design,Unique Appearance,high reliability* Feature *Easy installation,Convenient Use,Easy OperationFeaturesNEW DESIGNshipping noticeCan not ship to Puerto Rico,Alaska/HawaiiEANdose not applyUPCdose not applyBrandSENDERPICKMPNDoes not applyOn Nov 5, 2024 at 01:18:12 PST, seller added the following information:

Price: 197.05 USD

Location: Monroe Township, New Jersey

End Time: 2024-12-05T07:01:31.000Z

Shipping Cost: 0 USD

Product Images

Outboard Motor Fishing Boat Engine Water Cooling/Air Cooling 2/4 Stroke 3.5-7 HP

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Features:: Fast shipping from US Warehouse

Feature 1: Compact Design,Unique Appearance,high reliability

* Feature *: Easy installation,Convenient Use,Easy Operation

Features: NEW DESIGN

shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii

EAN: dose not apply

UPC: dose not apply

Brand: SENDERPICK

MPN: Does not apply

Available Variations

Color: 4HP 4-Stroke

Price: 318.24 USD

Available Quantity: 50

Quantity Sold: 0

Color: 3.5HP 2-Stroke

Price: 205.92 USD

Available Quantity: 50

Quantity Sold: 0

Color: 7HP 4-Stroke

Price: 507.41 USD

Available Quantity: 0

Quantity Sold: 0

Color: HANGKAI 6.5HP 4-Stroke

Price: 809.89 USD

Available Quantity: 0

Quantity Sold: 0

Color: Hangkai 3.6HP 2 Stroke

Price: 223.66 USD

Available Quantity: 50

Quantity Sold: 0

Color: 3.5HP & 2-Stroke(TYPE ONE)

Price: 197.05 USD

Available Quantity: 50

Quantity Sold: 0

Color: Hangkai 6HP 2 Stroke

Price: 534.02 USD

Available Quantity: 50

Quantity Sold: 0

Recommended

Screw Push-Pull Test Stand Force Gauge Horizontal Tester Stand Accuracy 500N
Screw Push-Pull Test Stand Force Gauge Horizontal Tester Stand Accuracy 500N

$78.83

View Details
Suspended Edge Guide For Juki Series Guide Ruler Kit Adjustable Sewing Machine
Suspended Edge Guide For Juki Series Guide Ruler Kit Adjustable Sewing Machine

$17.74

View Details
Square Manual Hydraulic Hole Punch Knockout Dies 45mm × 45mm 40 chrome Steel US
Square Manual Hydraulic Hole Punch Knockout Dies 45mm × 45mm 40 chrome Steel US

$84.22

View Details
Modern Multi Function Starting Block Sprinter Runway Track and Field Durable
Modern Multi Function Starting Block Sprinter Runway Track and Field Durable

$68.98

View Details
Handheld Oiler Bucket Oil Gun Kit Lubricator of Pipe Threader Threading Machine
Handheld Oiler Bucket Oil Gun Kit Lubricator of Pipe Threader Threading Machine

$139.92

View Details
Flower Making Tools Kit Professional Electric Silk DIY Making Tool Set USA
Flower Making Tools Kit Professional Electric Silk DIY Making Tool Set USA

$57.15

View Details
Benchtop Polishing Buffing Machine Jewelry Polisher Dust Collector W/ Light 500W
Benchtop Polishing Buffing Machine Jewelry Polisher Dust Collector W/ Light 500W

$161.01

View Details
Right Side Tail Light Fit 2011- 2019 Mitsubishi Outlander Sport Outer Brake Lamp
Right Side Tail Light Fit 2011- 2019 Mitsubishi Outlander Sport Outer Brake Lamp

$45.38

View Details
0.01mm Dial  Gauge Indicator Cylinder Measuring Micrometer Metric 50-160mm
0.01mm Dial Gauge Indicator Cylinder Measuring Micrometer Metric 50-160mm

$50.13

View Details
37mm/70mm/75mm Graphic Punch Die Cutter Round PVC Paper Card Button Maker Manual
37mm/70mm/75mm Graphic Punch Die Cutter Round PVC Paper Card Button Maker Manual

$58.93

View Details