Pendotech Integrated Single Use Sensor Station

Description: Pendotech Integrated Single Use Sensor Station This is a Pendotech Integrated Single Use Sensor Station. What you will get: Pendotech Integrated Single Use Sensor Station Consisting of: Pressuremat PMAT2A (2 Inputs max) CMONT (Conductivity Monitor) (2 Inputs Max) UV Photometer SPEC-P-1-SU-280 (2 Inputs) pH Meter (Eutech Instruments) (1 Input) Power Adapter Copy of PressureMAT Plus Data Acquisition Software on CD This is my item PR RH Studio Shelf 1 4273. 1 was available at listing time. This unit does not have any cables with it. The only cable is the power cable. I am trying to consult PendoTech but as a "Reseller" it seems that they won't answer my questions.Check out my other items where I have a lot of other scientific equipment and accessories for sale.More Information:Integrated Single Use Sensor Station Consolidate Single Use Process Measurements into a Single Station Measurement options include: Pressure Conductivity UV and Turbidity Flow pH All are calibrated and ready to use (except pH – currently require calibration). Perfect for chromatography processes where single use technology is required. All sensors are single use, however can be cleaned and reused. Sensors for pressure, conductivity, UV/turbidity and flow come calibrated and ready to use; the optional pH may require a calibration step depending on accuracy requirements. PressureMAT® & PressureMAT PLUS Options PressureMAT & PressureMAT PLUS models are limited to 4 inputs. You can select your ideal model from the configuration options in the table below to meet your process requirements. There are a range of options to accommodate pressure sensor inputs, flow meter inputs and the optional internally installed UV/Turbidity and pH units. The flow meter, UV/Turbidity and pH readings all appear on the PressureMAT display for easy viewing of all data at the same location. This faciliates the data to be transferred along with the data from the CMONT conductivity sensor monitor to the PendoTECH PMATP-GUI PC data acquisition software.PendoTECH Single Use Conductivity SensorsTM & Conductivity Monitor PendoTECH’s Single-Use Conductivity Sensors™ and Conductivity Monitor are used for highly accurate conductivity and temperature measurements without the need for sensor calibration. All sensors have a pre-determined cell constant which is entered into the monitor. The sensor monitor reads conductivity and temperature for two sensors. The monitor features temperature compensation that normalizes conductivity readings to 25°C and it has a RS232 output for data collection to a PC.PendoTECH PressureMAT & CMONT Data Acquisition Software RS232 The PendoTECH PressureMAT® (PMAT) monitor/transmitter that is used to read the PendoTECH Pressure Sensors comes with a data port as a standard feature. PendoTECH has created a customized software package that can trend the data real-time and collect the data to a file that can be opened by programs such as Excel. The software has settings to choose the PressureMAT model from a list and it can optionally perform calculated values such as DeltaP and trans-membrane pressure, which are used for certain filtration applications. The PendoTECH CMONT Conductivity/Temperature sensor monitor has a data port, and its data can either be logged to the software in conjuction with the PressureMAT data or only have its data logged. Additionally, the PC software can log data from one scale.UV Absorbance & Turbidity The PendoTECH Single Use Rotary Flow Meter comes in two sizes: of 1/4 inch and 1/2 inch hosebarb. They can measure in a range of 100 mL/min to 20 L/min and have an accuracy of +/- 5%. The internal rotor blades reflect an infared light beam and each rotation measured is converted to an electrical pulse that is received by the frequency input channel on the PressureMAT PLUS. Each rotor has a K factor printed on it which is its calibration factor and this is entered into the monitor and is used to convert the pulses to the flow rate. PendoTECH’s Single-Use UV Absorbance and Turbidity measurement units can measure and collect data from the bioprocess fluid streams while it is processing, resulting in less disruption to bioprocessing operations compared to off-line measurements. PendoTECH’s Single Use UV Flow Cells, coupled with a unit’s compact photometer with fiber optic cables, can measure the UV absorbance at 280nm in filtration and chromatography applications without product contact. Additionally, the single wavelength LED light source in the unit is available in other popular wavelengths of 300nm and 260nm and most other wavelengths in the UV-VIS-NIR range. Our Turbidity Flow Cells and 880nm photometer can measure the turbidity of un-clarified material from a bioreactor or fermentor, or measure a liquid after it flows through a filter to provide consistent monitoring of filter performance. For Turbidity measurement, PendoTECH’s Single Use Flow Cells fit in a Flow Cell Stand that shields ambient light interference. The single use cells are cost-effective for disposable applications, but also may be repeatedly cleaned and reused. The measurement units have no display so via their transmitter feature they integrate to a device with an input to display the measured value such as a PressureMAT PLUS. For increased versatility there is a dual wavelength unit available and two different measurements can be made with one flow cell.pH Meter The pH monitor has a wide range of useful features and programmable options. For probe calibration there is a 2 point calibration mode and calibration data is retained in non-volatile memory when the unit is powered off. It has a simple, easy to read user interface with a water resistant front panel.Any standard pH probe that has a BNC circular connector can be used. PendoTECH offers several in-line options that are both single use and re-usable. The single use model can be calibrated before use, then inserted into the flow cell and optionally disposed of after use. It can also be re-used. For the cells designed for re-use, there is one for Lab/Development with either a luer, 1/8 inch hose barb, or 1/4 inch hose barb; and one for Pilot scale with a 3/4 inch sanitary flange. In both designs, the probe can be removed from the cell for calibration with buffers using the pH meter calibration menu. The lab scale probe slides past an o-ring seal to give the probe tip access to the fluid path and the hold-up volume is less than 1mL. The Pilot scale probe has a 12mm OD and is secured in the flow cell via a compression fitting. The compression ferrules are made from PTFE so they can be repositioned or removed from the probe entirely.Conductivity Monitor Specifications (Model: CMONT) System Component Specifications Enclosure WxHxD: 7.86inch x 4.47inch x 2.25inch (19.96 x 11.35 x 5.72cm) Approximate weight: 1.34lbs (0.61kg), Material: ABS Plastic NEMA 4X front panel; panel and wall mount optional Keypad 8 button keypad with LEXAN® overlay Display 4 line backlit LCD Power Inlet D9 15-24 volts DC, 4 watts (powered by wall supply) Pin 1- ground; Pin 4- +24V Sensors Input (s) D15 female; Temperature Pin 7 (-), Pin 2 (+); Conductivity Pin 9 (high), Pin 12 (low) Analog Output(s) D15 male (screw terminal adaptor included as shown on right) Conductivity 4-20mA Range: 0-100mS Temperature 4-20mA Range: 0-70°C Accuracy: 0.1% of full scale Sourcing with Maximum Load: 400ohms RS232 Output Data output to a PC at frequency up to 1/sec. Regulatory Compliances RoHS and REACH Compliant CE Mark EN613261:2013; EN61010-1:2010 PressureMAT® Monitor Specifications System Component Specifications Enclosure WxHxD: 7.86inch x 4.47inch x 2.25inch (19.96 x 11.35 x 5.72cm) PMAT-S: 4.70inch x 4.70inch x 2.25inch Approximate weight: 1.3 lbs (0.65 kg), Material: ABS Plastic (11.94 x 11.94 x 5.72cm) IP66 / NEMA 4X front panel; panel and wall mount optional Approx weight: 0.86 lbs (0.39kg) Keypad 8 button keypad with LEXAN® overlay Display 8 line LCD backlit blue, pressure displayed as X.X psi/X.XX bar; PMAT2HR & PMAT-SHR X.XXX psi/X.XXX bar Power Inlet 2.5mm Circular Power Jack (center post positive) or D9 12-24 volts DC, 4 watts (powered by wall supply) Pressure Sensors Input (s) Models offered with 1-4 inputs Range of -11.5 to 75.0psi; (-0.793bar to 5.171bar) PMAT2HR & PMAT-SHR -0.7 to 7.5psi (-0.0483bar to 0.510bar) Configured for PendoTECH Single Use Pressure SensorsTM, Connector: DA15 (includes 12 ft reusable cables) Relay Outputs(s) [Up to 4 outputs available as a combination of Relay and Analog outputs] Specifications for relay used for the alarm output: • Normally CLOSED or OPEN via wiring • 28 Volt AC/DC Maximum • 1amp closure, 2amps maximum current • 20 millisec max turn on/off time • Screw terminal connector Analog Output(s) [4-20 mA] [up to 4 outputs available as a combination of Relay and Analog outputs] Screw terminal connector 4-20 mA Range: -10 to 75psi (-0.689bar to 5.171bar); PMAT2HR & PMAT-SHR -1 to 3psi (-0.069bar to 0.207bar) Accuracy: 0.1% of full scale Sourcing with Maximum Load: 400ohms Load Impedance: Zero Ohm minimum resistance, 22 mA maximum output RS232 Output Data output to a PC at frequency up to approx every 2 seconds Optional Internal Data Logger: Part# PDKTP-DLOG (logger not available with PMAT-S) Regulatory Compliances CE Mark EN61326-1:2013; EN61010-1:2010; EN/ISO13489-1:2009; EN60204-1:2009 FCC Part 15 Class B verified FCC Part 68 5TUUSA-23969-DT-E RoHS and REACH Compliant UL Listed Please use the shipping calculator to determine shipping. Check out my other items! If you receive your item and it is not to your 100 Percent Satisfaction, please contact us before leaving feedback. I strive to make sure every transaction is a positive one! IF you have a problem with my item, I would like you to use the "Contact Seller" link in the listing, or call me. Please don't open a case. Cases count against me even if they are resolved. I stand behind my items and will work out any problems that you may have with an item. So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication. International Buyers, Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts". US and International government regulations prohibit such behavior. Powered by SixBit's eCommerce Solution

Price: 7499.99 USD

Location: Natick, Massachusetts

End Time: 2025-01-02T23:42:35.000Z

Shipping Cost: N/A USD