PID TEMPERATURE CONTROL CONTROLLER W/ DUAL ALARM, BUILT-IN 2A AC SSR

Description: Model# for this listing is SYL-2372. If you need a replacement controller for your current equipment, please confirm the model number on your current controller. PID Temperature Controller with Dual Alarm Outputs, w/ Built-in 2A AC SSR Features: PID control with fuzzy logic enhancement for the best stability control 0.2% accuracy over the entire input range Display in either Fahrenheit or Celsius temperature unit Percent output indication for easy trouble shooting of the system. Support both heating and cooling mode, Built-in 2A AC SSR can be used to drive small load directlyAuto/manual control with bump less transfer Dual alarm outputs with more than ten ways to activate Selectable security access levels High brightness large LED display that can be easily read from distance. Instruction manual, technical support and 6 month warranty Description: 1/16 DIN size (1.89x1.89" or 48 x 48 mm) temperature/process controller with dual display. Common applications of this controller include controlling the temperature of industrial equipment, laboratory equipment, beer brewing system, BBQ grill and smoker, heat treatment oven, glass kiln, etc. The controller use advanced artificial intelligence enhanced PID algorithm that can handle system that is sluggish or difficult to control by the traditional PID controller. In most cases, the controller will hold the temperature within a reasonable range with the default PID parameters. The auto-tune feature will further improve control accuracy and stability to within one degree of accuracy. In most cases, there is no need for user to play the confusing PID parameters in order to get the system stabilized. This high precision, full featured industrial grade controller supports more than twenty different input devices that cover almost every possible application requirement. Two alarm outputs can be activated by more than 10 situations. All the control and setting parameters are stored in the non-volatile memory that will not be lost when powered off. Recently, we added an advanced cold junction compensation circuit to further reduce the temperature drift when thermocouple sensor is used. Different than the other PIDs on the market, this unit has a built-in zero-crossing solid state relay (SSR) that can handle 2 Amp of load. The zero-crossing switching feature will avoid the noise caused by inductive load. It makes the controller more stable than the controller with relay contact output (SYL-2342) when switching inductive load such as a contactor, solenoid valve, and small motor. Please note that this controller is NOT for DC triggered AC SSR. It can not handle more than 300W (at 110V) either. Thousands of these controllers have been sold for very board range of applications from medical device manufacturing to beer brewing. Our customer base includes control engineering expert and hobbyist with very basic electronic knowledge. Our feedback rating is a good indication about the success rate of their projects. Please contact us if you are not sure whether this controller will work for your application. Main Specifications: Input type TC: K, E, S, WRe, J, T, B, N RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm. DC voltage:0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V. DC current: 4~20mA. Input range K (-60~2300ºF), S (-60~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF), J (32~1800ºF), B (32~3300ºF), N (32~2400ºF) Pt100 (-320~1100ºF), Cu50 (-60~300ºF) Linear input: -1999~+9999 defined by user Display Two lines, Four digits. °F or °C. Display Resolution 1°C and 0.1 °C. or 1°F, Accuracy ±0.2% or ±1 unit of full input range Control mode Fuzzy PID, Manual control, On-Off Output mode Built-in 2A AC SSR with zero-crossing switching 20 ~ 240V AC Alarm Process high/low alarm, deviation high/low alarm Alarm output Relay contact: 1A@240VAC, 3A@120VAC, or 3A@24VDC Power supply voltage rating 85~264VAC/50~60Hz Front panel dimension 1.89x1.89", or 48 x 48 mm (1/16 DIN) Default setting: Input sensor: K type thermocouple (Sensor not included). Display Unit: Fahrenheit (°F) Display resolution: 1 degree. Alarm 1: Deviation low Alarm 2: Deviation high Output: Relay contact Note:1. If you need controller to drive DC triggered AC SSR, please check SYL-2352. Click here to download instruction manual. Auberins also stocks K type thermocouple with 6 ft cable, SSR from 10 A to 50 A. 1/16 DIN Controllers with 30 steps of ramp/soak, 1/32 DIN and 1/4 DIN Controllers. Please see my other auctions or email for details *Warranty: 6 month warranty is offered to protect our buyers from defective parts only. We are not liable for any damages caused due to improper use or abuse.On Jun-28-13 at 13:11:01 PDT, seller added the following information:Attention for international buyers. The shipping service provided by this listing is via USPS First Class air mail. The tracking number may not work for the country you live. For most countries, the tracking number will stop working once the package let USPS international mail sorting center in Miami or New York. The shipping time: For West and North Europe, Australia, New Zealand, Canada (except central region) 2-3 weeks. (It might be as short as one week when lucky, but that is not the general case). For South Europe, Russia, Asia: Central region of Canada: 3-4 weeks. For Middle East, Central and South America 5-6 weeks. If you need faster shipping service such as Fedex express mail or EMS, please contact us before you place the order. While carrier transit time and customs clearance time are beyond our control, please email us if your item is not delivered after the estimated delivery time stated above. Customer satisfaction is our focus and we will try our best to trace the package and offer solutions.

Price: 47.98 USD

Location: Alpharetta, Georgia

End Time: 2024-12-01T15:15:36.000Z

Shipping Cost: N/A USD