PIETTA 1851 NAVY CAP & BALL BLACKPOWDER MAGNA-TUSK™ ~ 2P AGED FLORAL GRIPS

Description: Arizona Custom GripsPIETTA1851 NavyCap & Ball (Black Powder / Percussion) Revolvers~ Exclusive ~ MAGNA-TUSK™ Aged floral GRIPSMilled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~two-PIECE (with SCREWHOLE) STYLETHIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. We include, free of charge, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame (without a grip pin). Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. Grip screw, conversion kit, and full illustrated instructions are included with each set of grips. 10292000~~~~~WHAT THESE WILL FITThese grips WILL FIT the PIETTA 1851 Navy Blackpowder (Cap & Ball / Percussion) revolvers ONLY. IMPORTANT!! (Please read the following in its entirety):Please note that Pietta has used at least 6 different grip frames on their ’51 Navy revolvers. To ensure that we send the correct grips, after placing your order please send us an immediate email (or attach a message to your order) with the two-digit code found in the small rectangular box on your revolver. Please see the 2nd picture in the listing to see what this looks like. This code will either be two letters or two numbers. If we do not hear back from you, we will ship the latest version of grips to ensure we get these out on time.Also, please note that these will NOT fit the Uberti, Colt, Armi San Marco, or any other make of 1851 Navy revolver. Please see our other auctions for these, or send us an email and we will help you locate what you need. 9.25.2100A note on the Italian-produced Revolvers:The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 11132000 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips: Our Ivory grips, an exclusive of Arizona Custom Grips, are made out of a premium high-grade, ultra-high density ivory material (Magna-Tusk™), designed from the ground up as a premium grip material to greatly improve on the inherent fragility and weakness of the cheaper Bonded Ivory used on just about all factory and regular aftermarket ivory grips today. Standard Bonded Ivory is brittle, and tends to weaken and develop stress fractures over time with repeated use, firing, and handling. Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative Ivory grip material available today, while still retaining the pristine look of real ivory. These grips are not cast or made out of an inferior, lightweight material, but are heavy and dense, carefully milled out of a solid block, one at a time. Magna-Tusk is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, will not melt like Urethane or plastic, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is produced with outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which most experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. About Our Aging Process: We go to great efforts to ensure that our Aged Ivory not only looks similar to real aged ivory, but in fact looks identical to the real thing. Our Magna-Tusk blanks will produce an aged Ivory grip unlike any other material made today. Through our slow aging process, these grips become beautifully mottled, variegated, and weathered just like old, antique Ivory, and incorporate other authentic details found on original old Ivory as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. As with real aged Ivory, no two are exactly the same. Our process produces an authentic appearance and genuine patina which extends deep into the surface. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their grips to the range or club, where our grips are immediately seen and noticed by others. We are also capable of producing them with a “clean” aged look if required (i.e., without the mottling, etc.), which is a simpler process, although most would agree that they do not look quite as authentic as our regular aged grips. If you are interested in ordering grips for a Brace of pistols, please order both sets together, and we will ensure a good matchup. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 040720 Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee your complete satisfaction with every purchase!!

Price: 94.95 USD

Location: Mesa, Arizona

End Time: 2024-07-25T23:17:55.000Z

Shipping Cost: 5.99 USD